|
|
|
|
|
|
|
|
|
|
|
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down.
|
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down.
|
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
Made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
|
Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
|
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
|
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
|
Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
|
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
|
|
|
|
|
|
|
|
|
|
|
|
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Made of heat treated carbon steel blade with a square plastic handle.
|
Used to cut or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets.
|
|
|
|
|
|
|
|
|
|
|
|
|
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
Made with tempered steel and heat treated for increased durability. Able to withstand a bending momentum of 310 in-lbs with a high-visibility. Powder coated finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
High quality tempered steel. Rust-resistant powder coat finish. Rocker head provides additional leverage. Beveled nail slots.
|
Used to cut or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets.
|
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Hardened steel pin, knurled body provides no slip grip, auto centering, and countersunk end. Used for creating starter screw holes.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dasco Starter Punch, Drop Forged Steel Body, 5-1/2 in Overall Length, 3/32 in Overall Width, Used to Loosen Frozen Pins and Keys
|
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft.
|
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
One piece forged all American steel design tool features heat treated point for long life. Designed to start holes in soft wood and scribe or mark wood and other soft materials such as cardboard.
|
Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
|
Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
|
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
Made from dropped forged, heat treated steel with nail slots at both ends for easy access and leverage.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of drop forged heat treated alloy steel with a knurled body for sure grip. Used to sink finishing nail or brad below the work surface. Set contains (1) each: 1/32", 1/16", 3/32" and 1/8".
|
Made from forged high grade American steel and heat treated to meet or exceed ANSI specifications. Larger "Targethead" striking area reduces mushrooming from repeated blows. Can be used for all around masonry for cutting, trimming and wedging.
|
Made of hardened and tempered alloy steel with square head, round knurled body; tips are cupped and chamfered. Square head prevents rolling; 4" inches long. Set contains (1) each: 1/32", 1/16", and 3/32".
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of dropped forged and heat treated steel with hexagon steel construction for enhanced strength. Single claw tool.
|
General Tools Hollow Punch, Series: 1280, 1/8 in Tip, 0.28 in Stock, 4 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More
|
General Tools Hollow Punch, Series: 1280, 3/16 in Tip, 0.38 in Stock, 4 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More
|
|
|
|
|
|
|
|
|
|
|
|
|
Magnetic brad and nail driver with solid wood handle and spring action shaft. Drives finishing nails up to 1-1 /2" long without marring surface. Downward pressure on handle inserts nail.
|
Made from chrome alloy steel material that is drop forged and heat treated. Baked enamel finish Heavy duty, hex shank.
|
Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to remove molding, open boxes, scrape paint and pull nails. High-carbon steel hardened and tempered, curved ground scraping end with nail slot. Fits easily into tool boxes or pouches.
|
Made from forged spring tempered steel with a 90 degree blade. Used for prying, pull nails, molding, and scraping.
|
Heat treated and plated alloy steel blades hold up to repeated use and are corrosion resistance. Chrome plated steel ferrule for added strength. Bright, smooth finish on bar. Machined hardwood handle. Bar diameter 3/16"; length 3-3/8".
|
|
|
|
|
|
|
|
|
|
|
|
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying.
|
General Tools Hollow Punch, Series: 1280, 5/16 in Tip, 1/2 in Stock, 4-3/32 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More
|
General Tools Hollow Punch, Series: 1280, 1/4 in Tip, 0.44 in Stock, 4 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
|
General Tools Hollow Punch, Series: 1280, 3/8 in Tip, 0.6 in Stock, 4-13/64 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More
|
Made from drop forged and heat treated steel with hexagon steel construction for strength. Use for precision nail pulling and prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from forged, heat treated, high-carbon steel with polished and beveled cutting edges. Contoured bar makes pulling nails, prying, lifting and scraping easier. Beveled nail slot at both ends. High visibility, powder coated finish.
|
Made from drop forged hard steel with a vinyl grip. Removes imbedded nails.
|
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of high carbon steel to extract deeply embedded nails with claws that are hardened and tempered and a cushion grip handle. Blue, rust resistant finish.
|
Made of heat treated high carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "Targethead" render long service.
|
Ideal for pulling trim, molding, baseboards, nails, scraping and cleaning flat surfaces; straight and curved blades with nail pullers; made from high carbon U.S.A. steel with full penetration heat treated for superior strength; kit includes (1) of each: 9" pry/trim/scraper bar, 5-1/2" Lil pry bar and 7-1/2" Ultra pry bar.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from heat treated, high carbon American steel with a "Targethead" that reduces spalling and mushrooming, extra length for easy access. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
|
Made from heat treated, high carbon American steel with a "Targethead" that reduces spalling and mushrooming, extra length for easy access. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
|
Bar is forged half round, for added strength and less weight with wide, thin blade for easy prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
General Tools Hollow Punch, Series: 1280, 7/16 in Tip, 0.67 in Stock, 4-1/2 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More
|
Made of heat treated high carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "Targethead" render long service.
|
Heat treated for durability with a special extracting claw and a beveled nail slot.
|
|
|
|
|
|
|
|
|
|
|
|
|
Forged of heat treated, high carbon American steel with a 90 degree claw and a bevel sharpened ripping blade; features a variety of nail pulling slots, Sharp V bite in the nail shank for easy nail removal. Blue enamel finish.
|
Used to cut or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets.
|
Spring tensioned, self opening tool made of plated steel with cushioned vinyl grip with revolving turret that has six hardened steel punches: 5/64", 3/32", 7/64", 1/8", 5/32", and 3/16"; used to make tiny holes in leather, plastic, rubber, canvas, and other lightweight materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
Interchangeable tip for convenience; hexagonal head prevents rolling and can be used as a standard drill chuck ? nail set doubles as drill extension; knurled locking collar for easy nail release and reversal; accepts standard screwdriver bits for versatility; long, beveled tip for easy nail head alignment; fully hardened, precision-milled steel for long life. Set includes: (1) each: 1/32?, 2/32?, 3/32? and #2 point Phillips.
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying.
|
Stanley Nail Set, Cushion Grip, 3 Pieces, Includes: 58-911 Model 1/32 in Nail Setter, 58-912 Model 2/32 in Nail Setter and 58-913 Model 3/32 in Nail Setter, Steel, Assorted
|
|
|
|
|
|
|
|
|
|
|
|
|
Dasco Utility Chisel, 1-1/4 in Tip, Flat Tip, 12 in Overall Length, High Carbon Steel, Comfortable Grip Handle, Plastic Handle, ANSI Specified, For Cutting or Shaping Brick, Cement Block, Cinder Block or Trimming Excess Mortar
|
General Tools Hollow Punch, Series: 1280, 1/2 in Tip, 3/4 in Stock, 4-1/2 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More
|
General Tools Hollow Punch, Series: 1280, 9/16 in Tip, 0.82 in Stock, 4-39/64 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More
|
|
|
|
|
|
|
|
|
|
|
|
|
General Tools Arch Punch, Series: 1271, 1/4 in Tip, Circular Tip, 0.31 in Stock, 4-1/2 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
|
General Tools Arch Punch, Series: 1271, 3/8 in Tip, Circular Tip, 1 in Stock, 4-1/2 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
|
General Tools Hollow Punch, Series: 1280, 5/8 in Tip, 0.87 in Stock, 4-1/2 in Overall Length, Forged Steel, Black Oxide, For Working on Leather, Rubber, Canvas, Cardboard, Plastic, Gasket Material and More
|
|
|
|
|
|
|
|
|
|
|
|
|
Forged of high carbon heat treated American steel with 30 degree angled end for fast starting, positive grip and a 90 degree end for close leverage; features a variety of nail pulling slots, Sharp V slots bite in the nail shank for easy nail removal. Blue rust resistance finish.
|
Made from tempered, forged high-carbon alloy steel. Flat surface allows users to pry molding and trim reducing material damage, polished, beveled claws for nail pulling and prying.
|
Made from tempered, forged, high-carbon alloy steel with a flat striking face and polished, beveled claws for nail pulling and prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying.
|
Dasco Nail Puller, Double End, 10-1/2 in Overall Length, Heat Treated High Carbon Steel, Blue, Rust Resistant, For Prying and Removing Nails
|
Dasco Cold Chisel, 3/4 in Tip, 12 in Overall Length, High Carbon Steel, Comfortable Grip Handle, Plastic Handle, ANSI Specified, For Cutting or Shaping Brick, Cement Block, Cinder Block or Trimming Excess Mortar
|
|
|
|
|
|
|
|
|
|
|
|
|
General Tools Arch Punch, Series: 1271, 1/2 in Tip, Circular Tip, 1 in Stock, 4-1/2 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
|
The Spring Tools 1/32 in. to 2/32 in. combo nail set is designed to effortlessly set nails and pneumatic brads to a desired depth. These professional grade tools are ideal for the painter or cabinet maker who occasionally needs to set nails and are outstanding for tight work spaces. The set is easy and safe to use and it's also extremely durable. Made in the USA.
|
Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling, one handed operation, no hammer needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of heat treated, high carbon American steel. Used for driving and removing pins and keys. Includes (1) each Nos: 562 3/32" x 5-1/2" Starter Punch, 582 1/8" x 5-1/2" Pin Punch, 583 5/32" x 5/1/2" Pin Punch, 584 3/16" x 5-1/2" Pin Punch, 589 1/4" x 6" Pin Punch and 592 1/16" x 4/12" Pin Punch.
|
Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish.
|
Heat treated, high carbon American steel. "Targethead" design increases striking area reduces spalling and mushrooming. One Each Nos.: 401 5/16" x 5-1/4" Cold chisel, No. 406 5/8" x 6-3/4" Cold chisel and No. 408 3/4" x 7-1/8" Cold chisel; to be used on cast iron, wrought iron, steel, bronze and copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from forged, tempered steel, with wide, sharp blades that slip easily under molding and baseboard; curved ends for leverage. Chrome plated finish.
|
Dasco Cold Chisel, 1 in Tip, 12 in Overall Length, High Carbon Steel, Comfortable Grip Handle, Plastic Handle, ANSI Specified, For Cutting or Shaping Brick, Cement Block, Cinder Block or Trimming Excess Mortar
|
Three sizes of bars for versatility and multiple applications. Stamped one-piece steel construction for strength & durability. Tear-drop nail pullers for easy nail removal. Lightweight design for easy carrying in tool belt or box. High visibility power-coated finish for easy carrying in tool belt or box.
|
|
|
|
|
|
|
|
|
|
|
|
|
Chrome alloy steel material; drop forged, heat treated, baked enamel finish; heavy duty; hex shank; set contains: (1) 5/16" x 5?, (1) 5/8" x 6-1/2" and (1) 3/4" x 7".
|
Made of one piece forged chrome vanadium steel. Hardened, quenched and tempered for long life and safety. Powder coat finish for increased visibility. Set contains (1) each: 3/8", 1/2" & 5/8".
|
Made with offset blade and shorter bite for increased leverage; bi-material hand guard; used for cutting and shaping wrought iron, cast iron, steel, brass, bronze, copper, aluminum, bolts, nuts and rivets.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from forged spring tempered steel for heavy duty use with three beveled nail slots; polished, sharp blades for easy insertion. Used for prying molding, scraping and pulling nails. Blue coated finish.
|
Spring steel for strength and durability; extra wide prying end for leverage and pry surface; pointed beveled end for penetration and nail pulling; multiple nail pullers for flexibility and nail removal.
|
Made from tempered, forged high-carbon alloy steel. Flat surface allows users to pry molding and trim reducing material damage, polished, beveled claws for nail pulling and prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from tempered, forged, high-carbon alloy steel with a flat striking face and polished, beveled claws for nail pulling and prying.
|
Made from forged, high-carbon steel, long reach for greater leverage in nail pulling, lifting or prying. High visibility, powder coated finish.
|
General Tools Arch Punch, Series: 1271, 5/8 in Tip, Circular Tip, 1.31 in Stock, 5 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish.
|
Made of high carbon steel to extract deeply embedded nails with claws that are hardened and tempered. Blue, rust resistant finish.
|
Made from forged, heat treated, high-carbon steel with polished, beveled cutting edges. Arched center gives more swing during nail pulling; tight radius on bend angle aids in positioning bar. Extended tongue improves grip and reach, can be used as a foot levered, hands free panel lift. High visibility, powder coated finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat treated for durability with a double end, 90 degree and 30 degree, puller and fully sharpened claw tips.
|
Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish.
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
General Tools Arch Punch, Series: 1271, 3/4 in Tip, Circular Tip, 1-1/2 in Stock, 4-3/4 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
|
For punching round holes in leather, plastic, rubber, canvas, cardboard and similar materials; special compound joint design requires less effort than other punch pliers; spring tension, self-opening revolving punch; six tapered, hollow, hardened steel, non-clogging punches; plastic grips for comfort and control. Punch sizes: 5/64", 3/32", 7/64", 1/8", 5/32" and 3/16".
|
Nail digger exposes the head of a flush nail so it can be pulled with minimal damage to the wood. I-beam shaft provides strength without adding weight. Extra wide strike surface helps user accurately strike the bar to get under a nail or behind material to pry. Pointed penetration end digs into material to remove embedded nails.
|
|
|
|
|
|
|
|
|
|
|
|
|
This molding bar is designed to pull and pry nails or to safety remove molding and trim. For removing difficult nails the flat striking face allows the claw to be driven under the nail. Shaft is constructed in an I-beam design for durability and light weight.
|
Made from forged spring tempered steel for heavy duty use with three beveled nail slots; polished, sharp blades for easy insertion. Used for prying molding, scraping and pulling nails. Blue coated finish.
|
Provides accurate center punches without drill bit traveling, one handed operation, no hammer needed; spring tension impact adjustments for working with lighter materials, replaceable hardened steel point, and black oxide finish preventing rust.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from one piece forged chrome vanadium steel that is hardened, quenched and tempered for long life. Powder coat finish for increased visibility. 6" long. Includes (1) each: 1/16", 1/8", 5/32", 3/16", 1/4" & 5/16" points.
|
Spring steel for strength and durability; extra wide prying end for leverage and pry surface; pointed beveled end for penetration and nail pulling; multiple nail pullers for flexibility and nail removal.
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from forged, tempered steel with wide, thin, sharp blades for scraping and cutting and a rocker head for maximum leverage.
|
Made of heat treated, high carbon American steel. Set contain (1) each: Nos.: 402 3/8" x 5-5/8" Cold chisel, 406 5/8" x 6-3/4" Cold chisel, 532 7/16" x 5" Center Punch, 562 5-1/2" Long Starter Punch and 582 1/8" x 5-1/2" Pin Punch.
|
Made from tempered, forged, high-carbon alloy steel with a flat striking face and polished, beveled claws for nail pulling and prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying.
|
General Tools Arch Punch, Series: 1271, 7/8 in Tip, Circular Tip, 1-1/2 in Stock, 5 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
|
General Tools Arch Punch, Series: 1271, 1 in Tip, Circular Tip, 1.63 in Stock, 5 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish.
|
Lightweight aluminum body with alloy steel internal components, provides accurate center punches without drill bit traveling, one handed operation, no hammer needed, spring tension impact adjustments for working with lighter materials.
|
Made of heat-treated forged steel; inside taper for clearance; ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from tempered, forged steel; one piece I-Beam construction for strength, lightweight with a rocking head for leverage and a beveled nail slot. Baked enamel finish.
|
Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish.
|
Provides accurate center punches to prevent drill bits from traveling, handles heavy-duty metals, yet not overbearing when working with wood or thin-walled tubing. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Black oxide finish to prevent rust. Used for punching, marking and staking and hardened steel point is replaceable.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish.
|
Made of heat treated high carbon American steel. Used for driving and removing pins, keys, etc.; machined from high carbon steel; set contains (1) of each: 1/8", 5/32", 3/16", 7/32", 1/4" and 5/16".
|
Includes a combination 1/32 in. nail set (sku # 734.1787) and 2/32 in. door pin removal tool. Provides 3,500 pounds of impact striking force. Great for tight spaces. Patented design is safe and easy to use. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of heat-treated forged steel; inside taper for clearance; ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials.
|
Head indexes over 180 degrees and locks into 16 positions for increased access 90 degree flat head offers better access and wider support for prying against surfaces; striking pas assists users with penetration and prying.
|
Contains 5/16", 5/8", 3/4" cold chisels; 1/16", 1/8", 5/32", 3/16", 1/4", 5/16" pin punch; 1/4" center punch; 3/8" prick punch and 7" scratch awl; scratch awl is ideal for starting screw holes; cold chisels are used for cutting and shaping metal that is softer than the cutting edge; pin punches are used to remove a pin or key; center punches are used for making accurate hole starting easier and prick punches are used to mark and scribe work pieces. Made of high carbon heat treated American steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
General Tools Drive Pin Punch Set, 5 Pieces, Hardened Steel, Conforms to Gov. Specs,GGG-P-831E
|
Multi-functional utility bar for both demolition and renovation projects; adjustable jaws for straightening, pulling and prying, crow bar end, nail extractor and striking head; extendable jaws quickly allows you to pull, pry or straighten any board up to 5.5" or increase the access and force of the nail extractor.
|
General Tools Center Punch, Automatic, Heavy Duty, Series: Professional, Steel, Black Oxide, Includes: Threaded, Replaceable Steel Point, For Marking and Staking the Toughest Metals
|
|
|
|
|
|
|
|
|
|
|
|
|
General Tools Arch Punch, Series: 1271, 1-3/8 in Tip, Circular Tip, 2-1/2 in Stock, 5-3/4 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
|
Head indexes over 180 degrees and locks into 16 positions for increased access 90 degree flat head offers better access and wider support for prying against surfaces; striking pas assists users with penetration and prying.
|
General Tools Drive Pin Punch Set, 8 Pieces, Includes: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 and 5/16 in Punches, Hardened Steel, Gray
|
|
|
|
|
|
|
|
|
|
|
|
|
General Tools Arch Punch, Series: 1271, 1-1/2 in Tip, Circular Tip, 2.63 in Stock, 6 in Overall Length, Forged Steel, Black Oxide, For Creating Accurate Holes in Leather, Rubber, Gasket Material and Soft Sheet Metal
|
Renovators, contractors and deck builders will all benefit from the lightweight, durable, multifunctional utility bar. The increased functionality leads to less tools on the jobsite. This bar features a 2x4 grabber, striking surface, 7/8 in. tri-lobe stock and an extra wide pry end with precision ground edges.
|
Drop forged and heat treated for added strength during prying, digging and tamping.
|
|
|
|
|
|
|
|
|
|
|
|
|
Multi-functional utility bar for both demolition and renovation projects; adjustable jaws for straightening, pulling and prying, crow bar end, nail extractor and striking head; extendable jaws quickly allows you to pull, pry or straighten any board up to 5.5" or increase the access and force of the nail extractor.
|
Drop forged and heat treated for superior strength during prying, digging and tamping. Hexagon steel construction for enhanced strength, one inch blade width.
|
Manufactured from tempered steel for maximum strength and durability; used for digging and prying of dirt and large rocks; the pencil point bar works in the toughest conditions.
|
|
|
|
|
|
|
|
|
|
|
|
|
Improved stainless steel alloy delivers increased strength and durability. Increased wear and tear protecting with an upgraded external finish. Patented Dimpler feature extracts nails quickly and cleanly. Japanese style puller delivers increased leverage for easier extraction.
|
Made from high tension heat treated tubular steel. Heads are drop forged and heat treated for extra strength. Used in demolition and prying applications. Chrome plated to prevent rust.
|
Drop forged and heat treated for added strength during prying, digging and tamping.
|
|
|
|
|
|
|
|
|
|
|
|
|
Drop forged and heat treated for superior strength during prying and tamping.
|
Made of extra heavy duty carbon steel with 5/8" high-carbon steel bar. Use the hook on joists and push handle down to squeeze boards tight, or use to straighten decking or joists. The cushioned handle is designed for kneeling to maintain pressure; frees both hands for nailing.
|
Indexing head - 14 locking positions for quick angle adjustment up to 180 degrees for optimized leverage. Striking face - allows for claw to be driven under nails that are under the surface. Accessibility - designed to reach between studs, joists, etc.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened and ground high carbon steel. Removes nails, moldings, etc.
|
High quality tempered steel. Rust-resistant powder coat finish. Rocker head provides additional leverage. Beveled nail slots.
|
Made from a forged alloy, hardened and tempered jaw, box-joint and 24 inch full extension. Black enamel finish. Conforms to U.S. Fed. Spec. GGG-P-79lb, Type 1, Class-1.
|
|
|
|
|
|
|
|
|
|
|
General Tools Arch Punch Set, Round Tip, 7 Pieces, Includes: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8 and 1 in Cutter Diameter, Heat Treated Forged Steel, Black, For Punching Holes in Leather, Rubber, Gasket Material and Soft Metals
|
8.5 oz solid Titanium bar with open truss design; patented nail removal feature makes a round impression around the nail head to allow the claws to easily slip under the nail head, thereby reducing damage to your material; strike plate outlasts steel bars 3X longer - doesn't spall, crack and mushroom like steel bars; very strong and comfortable trussed bar design.
|
|