|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High carbon steel blades cut mild steel, cast iron, aluminum, copper.
|
High carbon steel blades cut mild steel, cast iron, aluminum, copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High carbon steel blades cut mild steel, cast iron, aluminum, copper.
|
High carbon steel blades cut mild steel, cast iron, aluminum, copper.
|
High carbon steel blades cut mild steel, cast iron, aluminum, copper.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High carbon steel blades cut mild steel, cast iron, aluminum, copper.
|
Bi-metal construction allows blades to bend and flex without breaking.
|
Bi-metal construction allows blades to bend and flex without breaking.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bi-metal construction allows blades to bend and flex without breaking.
|
Combines the flexibility of carbon steel backs with the cutting performance of high-speed steel cutting edge. Cuts most metals including unhardened tool steel and stainless steel.
|
Carbide particles bonded to a steel blade. Cuts extremely abrasive materials with no teeth to chip or dull; use on materials other saws will not cut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bi-metal construction allows blades to bend and flex without breaking.
|
Bi-metal construction allows blades to bend and flex without breaking.
|
Bi-metal construction allows blades to bend and flex without breaking.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Combines the flexibility of carbon steel backs with the cutting performance of high-speed steel cutting edge. Cuts most metals including unhardened tool steel and stainless steel.
|
Combines the flexibility of carbon steel backs with the cutting performance of high-speed steel cutting edge. Cuts most metals including unhardened tool steel and stainless steel.
|
High speed steel blades for increased cutting life with ground tooth design for improved cutting performance. Can be used on most metals including unhardened tool steel and stainless.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel blades for increased cutting life with ground tooth design for improved cutting performance. Can be used on most metals including unhardened tool steel and stainless.
|
High speed steel blades for increased cutting life with ground tooth design for improved cutting performance. Can be used on most metals including unhardened tool steel and stainless.
|
Carbide particles bonded to an alloy steel rod, cuts extremely abrasive materials or materials that other saws will not cut with no teeth to chip or dull. Carbide grit offers the greatest wear and heat resistance. Fits any standard hack frame, gets into tight areas and cuts on both strokes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Strong and flexible blades of high carbon steel, heat treated and tempered for strength. Lock loop ends. Used for medium turns in wood 1/8" to 1-1/2" thick and soft materials 1/16" to 1/4" thick.
|
Strong and flexible blades of high carbon steel, heat treated and tempered for strength. Lock loop ends. Used for medium turns in wood 1/8" to 1-1/2" thick and soft materials 1/16" to 1/4" thick.
|
Stanley Coping Saw Blade, Flexible, 6-1/2 in Blade Length, 10 TPI, Carbon Steel Cutting Edge, 11 Points Per in, For Wood and Soft Metals
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Three replacement blades for the 'ProTouch' coping saw [101.7979], strong, flexible, and long lasting.
|
Three replacement blades for the 'ProTouch' coping saw [101.7979], strong, flexible, and long lasting.
|
Close quarter saw with strong, lightweight grip and adjustable carbon saw blade with 24 points per inch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Molybdenum alloy tool steel edge with flexible high carbon steel backing. High tooth hardness and shock resistance.
|
Molybdenum alloy tool steel edge with flexible high carbon steel backing. High tooth hardness and shock resistance.
|
Molybdenum alloy tool steel edge with flexible high carbon steel backing. High tooth hardness and shock resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A revolutionary new blade design that delivers up to 100% longer blade life versus the prior generation of Lenox hacksaw blades; bi-metal construction allows blades to bend and flex without breaking.
|
A revolutionary new blade design that delivers up to 100% longer blade life versus the prior generation of Lenox hacksaw blades; bi-metal construction allows blades to bend and flex without breaking.
|
A revolutionary new blade design that delivers up to 100% longer blade life versus the prior generation of Lenox hacksaw blades; bi-metal construction allows blades to bend and flex without breaking.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Integrated pencil holder. Holes in base for fastening to work bench. Polypropylene construction with lip and mounting holes for holding box against work surface. Cuts mitres on 22.5, 45, 90 and 45 face degree cut. Convenient SAE & Metric ruled edge. Interior dimensions 4-1/8" W x 2" H.
|
Tempered spring steel blade. Filed and set teeth for added sharpness and precision.
|
Handle covers blade to protect hands. Ergonomic grip with thumb rest for maximum comfort. High-impact polymer coating increases strength and durability, 45 percent more cutting depth, 10" carbon steel blade included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Highest quality heat-treated, high carbon, long steel blade with 32 teeth per inch. Used to cut wood, plaster, steel, brass, in tight quarters.
|
|
Pistol grip, keyhole saw with (2) 7-1/2" blades (1-24TPI and 1-10TPI) for metal and wood cutting; saw handle has comfortable, soft grip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stanley Hacksaw Blade, 12 in Blade Length, Tungsten Carbide Blade, Applicable Materials: Ceramic, Hardened Steel, Cast Iron and Masonry
|
Polished nickel frame adjusts to 10" and 12" blades, molded pistol grip handle, 2-3/4'' depth of throat.
|
Used to cut brass, copper, iron pipe, PVC, steel, and wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
General Tools Hacksaw, Junior, 6 in Overall Length, Plastic Handle, Includes: (6) Blades, Sturdy Tubular Frame, For Use Under Sinks, Around Water Heaters and in Other Tight Space Areas
|
Excel Razor Saw Set, 3 Pieces, Includes: K5 Heavy Duty Red Handle, NO 30450, NO 30490 Saw Blades, For Smooth Cutting Of Balsa Wood, Plastic, Thin Metal, Model Parts and Model Railroad Track
|
Sturdy I-beam construction and comfortable pistol grip. Six blade angle settings. Used to cut wood, metal and plastic. Uses 223.4698 replacement blade.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight, pistol grip handle, 4-way blade positioning cuts curves, circles, and frets into places where ordinary hacksaws cannot reach. Includes one wood cutting blade and one metal cutting blade.
|
Adjustable nickel plated steel frame with wooden handle, includes angle, high carbon steel blade. Use 149.9474 replacement blade.
|
ARTU Hacksaw Blade, 12 in Blade Length, 3/4 in Blade Height, 0.07 in Blade Thickness, Tungsten Teeth, Tungsten Carbide Blade, Applicable Materials: Brick, Cast Metal, Ceramic Tile, Composites, Fiberglass, Flagstone/Slate, Cement Backer Board, Hardwood, Laminates, Marble, Plaster, Plywood, PVC and Reinforced Cement
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable rust resistant spring steel blades. Specially ground, tri-edge teeth are impulse hardened to retain sharpness. Blades Interchangeable to match specific blade to task. Blade locks securely in handle. Blade guard protects teeth when saw is stored. 240RBP fits 991.5562, 250RBD fits 700.6372 and 265RBM fits 389.1579.
|
New ergonomically designed cushion grip handle for comfort. Hardened tempered blade provides clean, controlled cutting action.
|
Metal with lightweight, cast aluminum handle built for durability and designed for comfort. Includes a high performance 10" Bi-metal blade.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ergonomic triangular ProTouch handle, Flat-Bar frame with a depth of 5-1/2", DuraSteel pins and a high speed steel blade.
|
Rugged heavy-duty aluminum handle. Fits into tight spots allows for flush cutting applications. Bi-metal blade included.
|
225 lbs. blade tension; 90 and 180 degree adjustable blade angle allowing flush cuts; large, comfortable tension knob; robust all metal frame; full-grip handle helps protect knuckles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight aluminum frame. Comfortable molded TPR non-slip grip. Quick blade change feature. Easy wing nut tension adjustment. 45 and 90 degree blade settings. Includes one 24TPI hacksaw blade.
|
Aluminum close quarters hacksaw cuts brass, copper, iron pipe, steel, PVC, and wood.
|
High quality carbon steel blade for strength and durability. Precision ground impulse hardened teeth provides optimum stroking action.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat treated carbon steel blade for strength and a comfortable two tone soft handle.
|
Straight type wood handle with adjustable angle blade and a spring steel, rounded edge frame with polished finish. Throat opening permits cuts up to 6-1/2", used for cutting sharp angles and curves.
|
Ergonomic cushioned handle; gets into small places making difficult cutting jobs easy; uses any standard size hacksaw blade; fits into any tool box; includes (1) 10? hacksaw blade.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Straight type wood handle with adjustable angle blade and a spring steel, rounded edge frame with polished finish. Throat opening permits cuts up to 4 1/4", used by carpenters and the home craftsman.
|
Lightweight aluminum beam achieves 15K PSI; durable aluminum handle for a confident grip in most work environments; mount blade at 45 degrees for flush cutting applications.
|
Solid high carbon steel, virtually unbreakable and tempered to provide hard edge with flexible back. Economy blade for sawing light to medium-hard materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Solid high carbon steel, virtually unbreakable and tempered to provide hard edge with flexible back. Economy blade for sawing light to medium-hard materials.
|
Solid high carbon steel, virtually unbreakable and tempered to provide hard edge with flexible back. Economy blade for sawing light to medium-hard materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to flush cut dowels or fine detail cut such as work around windows and door frames. Pull stroke action eliminates binding and facilitates a straight cut. Induction hardened teeth stay sharp longer; quick release button for blade replacement.
|
Solid, one piece bi-material handle with heavy duty screws to secure blade to handle assembly. Used for precise cutting including dovetails, miters, and tenons and specifically for fine finish, plywood and hardwoods. Induction heat treated, triple ground blade.
|
Hardwood handle and (3) hardened, tempered blades provides clean, controllable cutting action; made of highest grade high carbon steel; frame depth is 6-3/4".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Induction hardened teeth stay sharp and aggressive 3-sided tooth design cuts wood 50 percent faster. Handle is contoured to fit the hand comfortably. For use on laminate, plastic pipe, and all wood types, blade is ideal for access in tight spaces. Fits in most tool boxes.
|
I-beam frame construction made from high impact polymer with steel core with a 12" fixed frame. Sloped nose for access into tight, hard-to-reach places, ergonomic non-slip grip. Easy open lever for quick and easy blade change.
|
Instantly adjustable for 10"/250mm to 12"/300mm blades. Adjusts 90 degrees for vertical or horizontal cuts. 3-1/2'' depth of throat. Includes: (1) 10" blade.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High quality carbon steel blade for strength and durability. Precision ground impulse hardened teeth provides optimum stroking action.
|
Durable rust resistant spring steel blades. Specially ground, tri-edge teeth are impulse hardened to retain sharpness. Blades Interchangeable to match specific blade to task. Blade locks securely in handle. Blade guard protects teeth when saw is stored. 240RBP fits 991.5562, 250RBD fits 700.6372 and 265RBM fits 389.1579.
|
Lightweight aluminum beam achieves 20K PSI; durable aluminum handle for a confident grip in most work environments; mount blade at 45 degrees for flush cutting applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compact folding handsaw with replaceable blades. Push button design locks blade into three different positions for multiple cutting applications. Uses any standard reciprocating saw blade, blades included are 635R & 636RP (plaster and general purpose blades).
|
Stanley Nest-of-Saws Set, 3 Pieces, Includes: 10 in X 11 TPI Multipurpose Saw Blade For Tight Spaces, 10 in X 9 TPI Non-hardened Keyhole Saw Blade For Cutting Wood, 6 in X 24 TPI Saw Blade For Cutting Metal, 24 TPI, Plastic Handle, 6 in Blade Length, For Cutting Molding, PVC Pipe and Even Green or Wet Wood
|
Bi-metal construction allows blades to bend and flex without breaking.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wide body reversible flush cut blade used to flush cut door jambs and millwork for tile installation/prep. Spring loaded pin enables blade to reverse for left or right cutting. Ergonomic ProTouch handle.
|
Honeycomb base and cam pins secure work for accurate cuts, 14-inch back saw and a built in measuring scale. Cuts miters on 45-degree and 90-degree, 22-1/2-degree angle and 45-degree face angle. Molded-in storage compartments to hold cam pins and pencil, base and pins are molded of high impact resistant material. Holds up to a 5" wide board.
|
New storage system, holds all 12" x 14" Stanley backsaws. Finger button allows easy release of saw from storage cavity, 90, 45, and 22-1/2 degree mitre slots. Holes in base for fastening to a workbench. Made from lightweight, high-impact ABS plastic. Can be used with either back or panel saws, open interior allows cuttings to fall through, integrated pencil pocket.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bi-metal construction allows blades to bend and flex without breaking.
|
Extra thick blade is available in metal and wood. Ergonomic ProTouch handle provides comfort and control. Includes: (1) 10", 24T metal blade, and (1) 5 -1/ 4", 10T work blade.
|
Works with any standard reciprocal or hacksaw blades, used for sawing in confined spaces. Ergonomic cushion grip handle. Durable tension nut quickly and easily allows blade changes. Includes both wood cutting and metal cutting blades and blade storage in handle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
225 lbs. blade tension; 90 to 180 degree adjustable blade angles allowing flush cuts; large, comfortable tension knob; robust all metal frame and full grip handle helps protect knuckles.
|
Bi-metal construction allows blades to bend and flex without breaking.
|
A new blade design that delivers up to 100% longer blade life versus the prior generation of Lenox? hacksaw blades. Shatter-resistant. Cuts through tough metals" black pipe, Unistrut?, copper pipe, hardened steel, threaded rod and rebar.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thick-Body (1mm) blade. Aggressive 'Tri-Ground' teeth. Hardwood handle.
|
This product works with most standard reciprocating saw and handsaw blades. It has a durable tension nut that quickly and easily allows blade change and a comfortable cushioned grip; includes (1) DeWalt Multi-purpose saw, (1) wood cutting blade and (1) metal cutting blade. Blade length; hack 12/10", reciprocate 6".
|
A specialized type of hand saw that features flexible blades that allow it to lay flat on a surface while cutting without damage to the surface below; classic flush cut design that cuts on the pull stroke so it can cut quickly while leaving a clean edge free of chips and burrs; the blade is double-sided so one can cut from either the left or right side of the material and the comfortable handle design will offer all the control one needs to cut once every time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double sided blade cuts from the left or the right, 23-point tooth geometry cuts quickly and cleanly on the pull stroke. Flexible blade for flush cutting plugs and dowels or for trimming through tenon or lap joints and ergonomic cushion grip handle.
|
Cuts on the pull stroke for faster, more accurate cut; features a fine/x-fine, thin, spring-steel blade which is durable and rust resistant. Ground and impulse hardened tri edged teeth cut cleanly and accurately. Saws have blade guards to protect teeth when not in use and can be quickly disassembled for convenient toolbox storage.
|
Cuts on pull stroke for easier sawing. Extra fine crosscut with thin, spring steel blades which are durable and rust resistant. Ground and impulse hardened tri edged teeth are razor sharp to cut cleanly and accurately. Saws have blade guards to protect teeth when not in use and can be quickly disassembled for convenient toolbox storage. Order item no. 7249543 for replacement blade.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Jab saw works with any reciprocating saw blade for easy cutting of different material; locks in two cutting positions: blade locks straight or angles and folds into handle for safe storage; other end includes lock-back utility knife - folds into handle for safe storage; includes 3 blades for pruning, metal and wood cutting; quick blade change simply twist open and replace blade; includes convenient belt case that holds tools and extra blades.
|
300 lbs. blade tension; 45 and 90 degree adjustable blade angles allowing flush cuts; blade storage holds up to 8 blades; bi-material handle for comfort; large, comfortable tension knob for quick & easy blade change; robust tubular metal frame and long reach cutting capability.
|
Solid high carbon steel, virtually unbreakable and tempered to provide hard edge with flexible back. Economy blade for sawing light to medium-hard materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Solid high carbon steel, virtually unbreakable and tempered to provide hard edge with flexible back. Economy blade for sawing light to medium-hard materials.
|
Durable rust resistant spring steel blades. Specially ground, tri-edge teeth are impulse hardened to retain sharpness. Blades Interchangeable to match specific blade to task. Blade locks securely in handle. Blade guard protects teeth when saw is stored. 240RBP fits 991.5562, 250RBD fits 700.6372 and 265RBM fits 389.1579.
|
Molybdenum alloy tool steel edge with flexible high carbon steel backing. High tooth hardness and shock resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extra wide blade 3" for fine woodworking used for precise cutting of dovetails, small joints and cutoff; steel back prevents bowing for true straight cuts. Spring-loaded pin allows blade to reverse quickly for left or right cutting, reversible handle with ergonomic cushion grip.
|
Molybdenum alloy tool steel edge with flexible high carbon steel backing. High tooth hardness and shock resistance.
|
Tool free blade change - change blades up to 10X faster; folding blade - easier and safer storage; rubber over mold grip - increased comfort; accepts all sawall blades - increased versatility.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Solid, one piece bi-material handle. Heavy duty screws for secure blade to handle assembly. Designed for precise cutting including dovetails, miters, and tenons. Used specifically for fine finish, plywood and hardwoods.
|
Four tools in one and folds into a convenient travel holster. Tool can be used as a straight or pistol grip style. Swivel locking chuck accepts a variety of saw blades for cutting applications or the insert bit adapter for using the tool as a screwdriver. Removable handle cap neatly stores seven insert bits inside the tool. Included in the set are (3) reciprocating saw blades (drywall, metal, wood), (7) insert bits, 1/4" socket adapter, 4" magnetic insert bit holder, dual position locking handle and travel holster with belt clip.
|
Molybdenum alloy tool steel edge with flexible high carbon steel backing. High tooth hardness and shock resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Light weight saw will tension up to 20,000 PSI. Front tension mechanism is easy to hold and adjust. Mount blade at 90 degrees for flush cutting applications. Comes with one 12", 24 TPI hacksaw blade.
|
Molybdenum alloy tool steel edge with flexible high carbon steel backing. High tooth hardness and shock resistance.
|
Flexible blade for flush cut with ProTouch grip. For use in cross and rip cuts, exterior trim carpenter/cutting the overhang of gable soffit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts on the pull stroke for faster, easier, more accurate cuts. Medium to fine cuts with thin spring steel blade which is durable and rust resistant. Ground and impulse hardened tri edged teeth are razor sharp to cut cleanly and accurately. Saws have blade guards to protect teeth when not in use and can be quickly disassembled for convenient toolbox storage.
|
Used for utility ripping and cross cutting when flush cutting, door shims, remodeling or cleanout of door casing prior to laying new floor tile. Induction hardened teeth retains sharpness.
|
Rugged, lightweight frame with screw-operated lever for tensioning the blade up to 30,000 PSI. Blade can be positioned for 45 or 90 degree cutting and spare blades can be stored inside frame; end of frame can be used as a jab saw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable crank handle for tension up to 30,000 PSI torque and micro-adjustment. Quick changing blades with spare blades stored inside frame. Blade can be positioned for 45 degree or 90 degree cutting; end of frame can be used as a jab saw.
|
Cuts on pull stroke for easier sawing. Coarse/medium rip and crosscut with thin, spring steel blade which is durable and rust resistant. Ground and impulse hardened tri edged teeth are razor sharp to cut cleanly and accurately. Saws have blade guards to protect teeth when not in use and can be quickly disassembled for convenient toolbox storage.
|
2-in-1 design for convenience, cut drywall and plane edges with 1 tool; Jab saw with triple ground teeth for fast cutting; stainless steel rasp for material removal; locking mechanism locks blade in open and close positions; compact storage, both blades folds into handle; ergonomic bi-material handle for extra comfort; Blade length: Jab - 5-1/4", Rasp - 4"; Points per inch: 9; Teeth per inch: 8.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Handle is made with glass filled, high strength nylon to support six different blade positions. Turn knob lets user store all three blades, switch blades, and tilt each blade. No tools required for blade change. Multiple position handle allows access to tight corners. Includes (3) blades: 10" universal blade cuts on the pull stroke, 8" compass saw blade and 6" metal cutting blade, weighs .655 lbs.
|
Durable, one-piece body is designed for ultra-high tension of 330 lb and a large cutting capacity up to 4-3/4" throat depth. Pre-tensioning mechanism holds blade in place for quick and easy blade changes, thumb dial adjustable tension mechanism, power load sliding tension and a contoured handle with a front thumb grip; ergonomically designed for control. Comes with 24 TPI bi-metal blade.
|
Cuts on pull stroke for easier sawing. Extra fine crosscut, medium to fine rip cut with thin, spring steel blades which are durable and rust resistant. Ground and impulse hardened tri edged teeth are razor sharp to cut cleanly and accurately. Saws have blade guards to protect teeth when not in use and can be quickly disassembled for convenient toolbox storage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
I-beam construction that allows blade to tension up to 50,000 psi, resulting in fast, straight cuts. Convenient blade storage up to 5 extra blades, converts to a jab saw; accepts any Lenox reciprocating saw blade. Rubberized grips on handles allow for confident handling even in wet or cold environments. Comes with one 12", 24 TPI hacksaw blade.
|
Advanced twist on the classic hacksaw design; blade cuts at both 45 and 90 degree angles for clean and effortless flush cuts; high tension locking system holds the blade firmly in place and helps prevent twisting; low profile design allows easy cuts in the tightest of spaces; long reach blade offers extended cutting capability and front handle design transforms instantly into a high performance jab saw.
|
Fully adjustable tension, holds blade up to 32,000 PSI, blade storage in frame. Quick-release, blade-changing mechanism, tension guide on handle lever, 3-7/8" throat depth. Hacksaw or reciprocating blades extended out nose of frame can be locked into place for tight clearance work.
|
|
|
|
|
|
|
|
|
|
|
|
|
Quick cam clamp holds work for accuracy and smooth, accurate cuts in wood. Simple angle adjustment for most applications. Includes: 22" backsaw with induction-hardened teeth and slip resistant grip.
|
|
|
