|
|
|
|
|
|
|
|
|
|
|
|
|
|
All weather galvanized finish.
|
All weather galvanized finish.
|
All weather galvanized finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All weather galvanized finish.
|
All weather galvanized finish.
|
Western States Multi-Use Screw, NO 6 Screw, 1 in Length, NO 2 Drive, Phillips Drive, Twinfast, Fine Thread, Phosphate
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Drywall Screw, NO 6 Screw, 1-1/4 in Length, Bugle Head, Phillips Drive, NC Thread, Phosphate, Black
|
Midwest Drywall Screw, NO 6 Screw, 1-5/8 in Length, Bugle Head, Phillips Drive, NC Thread, Phosphate, Black
|
Midwest Drywall Screw, NO 6 Screw, 2 in Length, Bugle Head, Phillips Drive, NC Thread, Phosphate, Black
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Drywall Screw, NO 8 Screw, 2-1/2 in Length, Bugle Head, Phillips Drive, NC Thread, Phosphate, Black
|
Midwest Drywall Screw, NO 8 Screw, 3 in Length, Bugle Head, Phillips Drive, NC Thread, Phosphate, Black
|
Western States Multi-Use Screw, NO 8 Screw, 3 in Length, Flat Head, NO 2 Drive, Phillips Drive, Twinfast, Fine Thread, Phosphate
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Multi-Use Screw, NO 6 Screw, 1-1/4 in Length, Bugle Head, Phillips Drive, Yellow Zinc Plated
|
Midwest Multi-Use Screw, NO 8 Screw, 2-1/2 in Length, Bugle Head, Phillips Drive, Yellow Zinc Plated
|
Midwest Multi-Use Screw, NO 8 Screw, 3 in Length, Bugle Head, Phillips Drive, Yellow Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Western States Multi-Use Screw, NO 6 Screw, 1 in Length, NO 2 Drive, Phillips Drive, Twinfast, Fine Thread, Phosphate
|
Western States Multi-Use Screw, NO 7 Screw, 2-1/2 in Length, NO 2 Drive, Phillips Drive, Twinfast, Fine Thread, Phosphate
|
All weather galvanized finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All weather galvanized finish.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Use for drywall to wood studs and all purpose wood fastening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for drywall to light gauge steel studs.
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to wood studs and all purpose wood fastening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to light gauge steel studs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to light gauge steel studs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for drywall to 20 gauge to 14 gauge steel studs.
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to light gauge steel studs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for drywall to 20 gauge to 14 gauge steel studs.
|
Use for drywall to light gauge steel studs.
|
Use for drywall to light gauge steel studs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 1-1/4 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 1-1/4 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Western States Multi-Use Screw, NO 6 Screw, 1-5/8 in Length, NO 2 Drive, Phillips Drive, Twinfast, Fine Thread, Phosphate
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 1-5/8 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Use for exterior projects where rust resistance is not as important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for exterior projects where rust resistance is not as important.
|
Use for exterior projects where rust resistance is not as important.
|
Use for exterior projects where rust resistance is not as important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for exterior projects where rust resistance is not as important.
|
Use for exterior projects where rust resistance is not as important.
|
Use for exterior projects where rust resistance is not as important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Camo Deck Screw, Multi-Purpose, NO 10 Screw, 3-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
Camo Deck Screw, Multi-Purpose, NO 10 Screw, 3-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, Star Drive, Type 17 Point, Tan
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Drywall Screw, Multi-Purpose, NO 8 Screw, 3 in Length, Phillips Drive, Coarse Thread, Yellow Zinc Plated, Gold, For Interior Projects
|
Pro-Fit Drywall Screw, Multi-Purpose, NO 7 Screw, 2 in Length, Phillips Drive, Coarse Thread, Yellow Zinc Plated, Gold, For Interior Projects
|
Pro-Fit Drywall Screw, Multi-Purpose, NO 7 Screw, 2-1/2 in Length, Phillips Drive, Coarse Thread, Yellow Zinc Plated, Gold, For Interior Projects
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Drywall Screw, Multi-Purpose, NO 6 Screw, 1-1/4 in Length, Phillips Drive, Coarse Thread, Yellow Zinc Plated, Gold, For Interior Projects
|
Pro-Fit Drywall Screw, Multi-Purpose, NO 6 Screw, 1-5/8 in Length, Phillips Drive, Coarse Thread, Yellow Zinc Plated, Gold, For Interior Projects
|
Pro-Fit Drywall Screw, NO 10 Screw, 3-1/2 in Length, Phillips Drive, Coarse Thread, Gold, For Interior Projects
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 2-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 3 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes. Reduces wood splitting and superior holding power.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes. Reduces wood splitting and superior holding power.
|
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes. Reduces wood splitting and superior holding power.
|
Use for exterior deck and railing projects where rust resistance is important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes. Reduces wood splitting and superior holding power.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Camo Deck Screw, Multi-Purpose, NO 10 Screw, 4 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 3-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications, flat head.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications, flat head.
|
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications, flat head.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins.
|
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications, flat head.
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications, flat head.
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications, flat head.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
50 screws per flat strip. Gray phosphate finish. Applications: Drywall to Wood. Compatible Tools: DS235AC (264.0712), DS232AC (264.0670), DS215-18V (264.0654), DS212-18V (264.0662)
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications, flat head.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Deep countersunk heads and slender shanks for finish work and trim applications. Easily driven flush with or below the work surface. Ideal for fastening corner boards, fascia, and mitred ends on wood siding jobs. Beaver bite type 17 auger point for extra fast starts.
|
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins.
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 1-1/4 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, NO 10 Screw, 1-5/8 in Length, Bugle Head, T25 Drive, Star Drive, 316 Stainless Steel
|
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
|
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications, flat head.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 1-5/8 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, NO 8 Screw, 2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
|
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coarse threads approximately 2/3 up shank draw board tightly to substrate . Pre-drilling always recommended, and a must near board ends to prevent splits. .344" diameter #2 Square Drive Bugle Head ; 'Beaver Bite' type 17 auger point for extra fast starts. Application: Pressure Treated Lumber.
|
Durable powder coated finish painted heads that escape notice in finished work. #1 square drive, .230" diameter, trim head with 'Beaver Bite' type 17 auger point for extra fast starts. Coarse threads approximately 2/3 up shank draw board tightly to substrate. Pre-drilling always recommended, and a must near board ends to prevent splits. Slender #7 shank for finish work and trim. Use for decking jobs with stable woods & wood substitutes when screw heads need to be hidden.
|
Deep countersunk heads and slender shanks for finish work and trim applications. Easily driven flush with or below the work surface. Ideal for fastening corner boards, fascia, and mitred ends on wood siding jobs. Beaver bite type 17 auger point for extra fast starts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Deep countersunk heads and slender shanks for finish work and trim applications. Easily driven flush with or below the work surface. Ideal for fastening corner boards, fascia, and mitred ends on wood siding jobs. Beaver bite type 17 auger point for extra fast starts.
|
Deep countersunk heads and slender shanks for finish work and trim applications. Easily driven flush with or below the work surface. Ideal for fastening corner boards, fascia, and mitred ends on wood siding jobs. Beaver bite type 17 auger point for extra fast starts.
|
Camo Deck Screw, NO 8 Screw, 2-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, NO 10 Screw, 3-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications, flat head.
|
50 screws per flat strip. Gray phosphate finish. Applications: Drywall to Wood. Compatible Tools: DS235AC (264.0712), DS232AC (264.0670), DS215-18V (264.0654), DS212-18V (264.0662)
|
Camo Deck Screw, NO 10 Screw, 2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
Use for drywall to light gauge steel studs.
|
Use for drywall to light gauge steel studs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for drywall to light gauge steel studs.
|
Use for drywall to light gauge steel studs.
|
Use for drywall to light gauge steel studs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to wood studs and all purpose wood fastening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to wood studs and all purpose wood fastening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to wood studs and all purpose wood fastening.
|
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Highly recommended for seaside applications and maximum corrosion resistance. Unique 4-corner thread-form with raised ridge technology greatly reduces driving torque. 6 lobe drive virtually eliminates driver bit cam-out. Self-countersinking nibs under head insure flush installation. Penetrate hardest wood products with ease; often without pre-drilling. Threaded approximately 2/3 up shank to tightly draw deck board to joist. Made of solid 316 stainless steel for maximum corrosion resistance. Contractor's Packs will fasten 500 square feet of decking (6" boards on 16" centers). Deck Packs will fasten 100 square feet of decking (6" boards on 16" centers). NOTE: DO NOT OVER-DRIVE.
|
Unique 4-corner thread form with raised ridge reduces driving torque penetrating the hardest wood products. 6-lobe drive virtually eliminates driver bit cam-out. Penetrate hardest wood products with ease, often without pre-drilling. Made of solid 316 stainless steel for maximum corrosion resistance. Threaded approximately 2/3 up shank to tightly draw deck board to joist. NOTE: Contractor's Packs containing 1750 screws will fasten 500 square feet of decking. Deck Packs containing 350 screws will fasten 100 square feet of decking (6" boards on 16" centers). 6-Lobe Driver Bit included in both Contractor and Deck Packs. Drive flush with surface of workpiece.
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Unique 4-corner thread form with raised ridge reduces driving torque penetrating the hardest wood products. 6-lobe drive virtually eliminates driver bit cam-out. Penetrate hardest wood products with ease, often without pre-drilling. Made of solid 316 stainless steel for maximum corrosion resistance. Threaded approximately 2/3 up shank to tightly draw deck board to joist. NOTE: Contractor's Packs containing 1750 screws will fasten 500 square feet of decking. Deck Packs containing 350 screws will fasten 100 square feet of decking (6" boards on 16" centers). 6-Lobe Driver Bit included in both Contractor and Deck Packs. Drive flush with surface of workpiece.
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, Star Drive, Type 17 Point, Tan
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications, flat head.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 2-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Corrosion resistance for harsh environments. Zero stripping recessed star drive. Interior/exterior use. No pre-drilling unless material requires. Self-countersinking. Star head recess/non stripping heads. Can be used with fibrous materials.
|
Use for drywall to 20 gauge to 14 gauge steel studs.
|
50 screws per flat strip. Coarse 2/3 thread with wax. Yellow zinc finish. Compatible with DS440AC (557.4876), DS425AC (557.4827), DS332AC (264.0720), DS232AC (264.0670) and DS31218V (305.6512).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 3 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Camo Deck Screw, NO 8 Screw, 3 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
|
50 screws per flat strip. Coarse 2/3 thread with wax. Yellow zinc finish. Compatible with DS440AC (557.4876), DS425AC (557.4827), DS332AC (264.0720), DS232AC (264.0670) and DS31218V (305.6512).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for exterior projects where rust resistance is not as important.
|
Use for exterior projects where rust resistance is not as important.
|
Use for exterior projects where rust resistance is not as important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for exterior projects where rust resistance is not as important.
|
Use for exterior projects where rust resistance is not as important.
|
Use for exterior projects where rust resistance is not as important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins.
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Pro-Fit Drywall Screw, NO 6 Screw, 1-1/4 in Length, Phillips Drive, Coarse Thread, Gold, For Interior Projects
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Drywall Screw, NO 6 Screw, 1-5/8 in Length, Phillips Drive, Coarse Thread, Gold, For Interior Projects
|
Pro-Fit Drywall Screw, NO 7 Screw, 2 in Length, Phillips Drive, Coarse Thread, Gold, For Interior Projects
|
Pro-Fit Drywall Screw, NO 7 Screw, 2-1/2 in Length, Phillips Drive, Coarse Thread, Gold, For Interior Projects
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Drywall Screw, NO 8 Screw, 3 in Length, Phillips Drive, Coarse Thread, Gold, For Interior Projects
|
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins.
|
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Uses reverse threads at the top and serrated threads along the shaft to remove composite material as the screw is driven in. Will not flag, mushroom or halo. Suitable for use in non coastal areas with all pressure treated lumbers including ACQ.
|
Uses reverse threads at the top and serrated threads along the shaft to remove composite material as the screw is driven in. Will not flag, mushroom or halo. Suitable for use in non coastal areas with all pressure treated lumbers including ACQ.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Use for exterior deck and railing projects where rust resistance is important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
Camo Deck Screw, NO 10 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 3-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 10 Screw, 3-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Camo Deck Screw, Multi-Purpose, NO 10 Screw, 3-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
Corrosion resistance for harsh environments. Zero stripping recessed star drive. Interior/exterior use. No pre-drilling unless material requires. Self-countersinking. Star head recess/non stripping heads. Can be used with fibrous materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Use for drywall to 20 gauge to 14 gauge steel studs.
|
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications, flat head.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Use for drywall to wood studs and all purpose wood fastening.
|
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Applications: Composite materials. Anti-Mushroom. Compatible Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)
|
Durable powder coated finish painted heads that escape notice in finished work. #1 square drive, .230" diameter, trim head with 'Beaver Bite' type 17 auger point for extra fast starts. Coarse threads approximately 2/3 up shank draw board tightly to substrate. Pre-drilling always recommended, and a must near board ends to prevent splits. Slender #7 shank for finish work and trim. Use for decking jobs with stable woods & wood substitutes when screw heads need to be hidden.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Composite/Capstock, NO 10 Screw, 2-1/2 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Tan
|
Camo Deck Screw, Composite/Capstock, NO 10 Screw, 2-1/2 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Brown
|
Camo Deck Screw, Composite/Capstock, NO 10 Screw, 2-1/2 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Cedar
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Composite/Capstock, NO 10 Screw, 2-1/2 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Gray
|
Yellow dacronized coating. Not for use in ACQ lumber.
|
Use for drywall to wood studs and all purpose wood fastening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
50 screws per flat strip. Thread: Coarse 2/3 with wax. Fits Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)
|
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications, flat head.
|
NanoGard fluoropolymer coated fasteners are designed for pressure treated lumber applications and for all outdoor wood construction for decking, patios, lawn furniture, window boxes, etc.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unique 4-corner thread form with raised ridge reduces driving torque penetrating the hardest wood products. 6-lobe drive virtually eliminates driver bit cam-out. Penetrate hardest wood products with ease, often without pre-drilling. Made of solid 316 stainless steel for maximum corrosion resistance. Threaded approximately 2/3 up shank to tightly draw deck board to joist. NOTE: Contractor's Packs containing 1750 screws will fasten 500 square feet of decking. Deck Packs containing 350 screws will fasten 100 square feet of decking (6" boards on 16" centers). 6-Lobe Driver Bit included in both Contractor and Deck Packs. Drive flush with surface of workpiece.
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Use for drywall to wood studs and all purpose wood fastening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for drywall to wood studs and all purpose wood fastening.
|
Applications: Composite materials. Anti-Mushroom. Compatible Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)
|
Yellow dacronized coating. Not for use in ACQ lumber.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow dacronized coating. Not for use in ACQ lumber.
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
50 screws per flat strip. Thread: Coarse 2/3 with wax. Fits Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Applications: Composite materials. Anti-Mushroom. Compatible Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)
|
50 screws per flat strip. Thread: Coarse 2/3 with wax. Fits Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)
|
Camo Deck Screw, Multi-Purpose, NO 10 Screw, 4 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow dacronized coating. Not for use in ACQ lumber.
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Durable powder coated finish painted heads that escape notice in finished work. #1 square drive, .230" diameter, trim head with 'Beaver Bite' type 17 auger point for extra fast starts. Coarse threads approximately 2/3 up shank draw board tightly to substrate. Pre-drilling always recommended, and a must near board ends to prevent splits. Slender #7 shank for finish work and trim. Use for decking jobs with stable woods & wood substitutes when screw heads need to be hidden.
|
Camo Deck Screw, Composite/Capstock, NO 10 Screw, 3 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Tan
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
|
LBM Drywall Screw, NO 10 Screw, 3-1/2 in Length, Fine Thread
|
LBM Drywall Screw, NO 8 Screw, 3 in Length, Fine Thread
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LBM Deck Screw, NO 8 Screw, 3 in Length, Phillips Drive, Steel, Galvanized
|
Camo Deck Screw, NO 8 Screw, 2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to wood studs and all purpose wood fastening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to wood studs and all purpose wood fastening.
|
Use for drywall to wood studs and all purpose wood fastening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
50 screws per flat strip. Gray phosphate finish. Applications: Drywall to Wood. Compatible Tools: DS235AC (264.0712), DS232AC (264.0670), DS215-18V (264.0654), DS212-18V (264.0662)
|
Yellow dacronized coating. Not for use in ACQ lumber.
|
Unique 4-corner thread form with raised ridge reduces driving torque penetrating the hardest wood products. 6-lobe drive virtually eliminates driver bit cam-out. Penetrate hardest wood products with ease, often without pre-drilling. Made of solid 316 stainless steel for maximum corrosion resistance. Threaded approximately 2/3 up shank to tightly draw deck board to joist. NOTE: Contractor's Packs containing 1750 screws will fasten 500 square feet of decking. Deck Packs containing 350 screws will fasten 100 square feet of decking (6" boards on 16" centers). 6-Lobe Driver Bit included in both Contractor and Deck Packs. Drive flush with surface of workpiece.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for drywall to wood studs and all purpose wood fastening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
|
Use for exterior deck and railing projects where rust resistance is important.
|
LBM Drywall Screw, NO 10 Screw, 4 in Length, Fine Thread
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unique 4-corner thread form with raised ridge reduces driving torque penetrating the hardest wood products. 6-lobe drive virtually eliminates driver bit cam-out. Penetrate hardest wood products with ease, often without pre-drilling. Made of solid 316 stainless steel for maximum corrosion resistance. Threaded approximately 2/3 up shank to tightly draw deck board to joist. NOTE: Contractor's Packs containing 1750 screws will fasten 500 square feet of decking. Deck Packs containing 350 screws will fasten 100 square feet of decking (6" boards on 16" centers). 6-Lobe Driver Bit included in both Contractor and Deck Packs. Drive flush with surface of workpiece.
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Highly recommended for seaside applications and maximum corrosion resistance. Unique 4-corner thread-form with raised ridge technology greatly reduces driving torque. 6 lobe drive virtually eliminates driver bit cam-out. Self-countersinking nibs under head insure flush installation. Penetrate hardest wood products with ease; often without pre-drilling. Threaded approximately 2/3 up shank to tightly draw deck board to joist. Made of solid 316 stainless steel for maximum corrosion resistance. Contractor's Packs will fasten 500 square feet of decking (6" boards on 16" centers). Deck Packs will fasten 100 square feet of decking (6" boards on 16" centers). NOTE: DO NOT OVER-DRIVE.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
LBM Drywall Screw, NO 6/7 Screw, 2 in Length, Fine Thread
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LBM Drywall Screw, NO 7 Screw, 2-1/2 in Length, Fine Thread
|
LBM Deck Screw, NO 10 Screw, 3-1/2 in Length, Phillips Drive, Steel, Galvanized
|
Unique thread form removes exhaust while driving to prevent mushrooming in composite decking. Type 17 point for fast starts. Small head diameter is less visible and 6 Lobe drive prevents stripping in recess. Deck Paks contain enough screws to fasten 100 square feet; 6" boards on 16" centers. Contractor Paks contain enough screws to fasten 500 square feet; 6" boards on 16" centers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
LBM Drywall Screw, NO 6 Screw, 1-5/8 in Length, Fine Thread
|
Yellow dacronized coating. Not for use in ACQ lumber.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
|
4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
|
LBM Drywall Screw, NO 6 Screw, 1-1/4 in Length, Fine Thread
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
LBM Deck Screw, NO 10 Screw, 4 in Length, Phillips Drive, Steel, Galvanized
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Highly recommended for seaside applications and maximum corrosion resistance. Unique 4-corner thread-form with raised ridge technology greatly reduces driving torque. 6 lobe drive virtually eliminates driver bit cam-out. Self-countersinking nibs under head insure flush installation. Penetrate hardest wood products with ease; often without pre-drilling. Threaded approximately 2/3 up shank to tightly draw deck board to joist. Made of solid 316 stainless steel for maximum corrosion resistance. Contractor's Packs will fasten 500 square feet of decking (6" boards on 16" centers). Deck Packs will fasten 100 square feet of decking (6" boards on 16" centers). NOTE: DO NOT OVER-DRIVE.
|
LBM Deck Screw, NO 6 Screw, 2 in Length, Phillips Drive, Steel, Galvanized
|
LBM Deck Screw, NO 7/8 Screw, 2-1/2 in Length, Phillips Drive, Steel, Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Yellow dacronized coating. Not for use in ACQ lumber.
|
Use for exterior deck and railing projects where rust resistance is important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LBM Deck Screw, NO 6 Screw, 1-5/8 in Length, Phillips Drive, Steel, Galvanized
|
Unique thread form removes exhaust while driving to prevent mushrooming in composite decking. Type 17 point for fast starts. Small head diameter is less visible and 6 Lobe drive prevents stripping in recess. Deck Paks contain enough screws to fasten 100 square feet; 6" boards on 16" centers. Contractor Paks contain enough screws to fasten 500 square feet; 6" boards on 16" centers.
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
LBM Drywall Screw, NO 6 Screw, 1 in Length, Fine Thread
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
Low-torque threads. Ribbed head design countersinks easily and provides a clean, finished appearance .High-low tip provides fast starts. Optimized threads for dimensional lumber. Quik Guard coating provides corrosion resistance for exterior and certain preservative-treated wood applications. Meets the performance requirements of AC257 exposure conditions 1 and 3. Tan color blends in with most woods.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes. Reduces wood splitting and superior holding power.
|
4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LBM Deck Screw, NO 6 Screw, 1-1/4 in Length, Phillips Drive, Steel, Galvanized
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Corrosion resistance for harsh environments. Zero stripping recessed star drive. Interior/exterior use. No pre-drilling unless material requires. Self-countersinking. Star head recess/non stripping heads. Can be used with fibrous materials.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Corrosion resistance for harsh environments. Zero stripping recessed star drive. Interior/exterior use. No pre-drilling unless material requires. Self-countersinking. Star head recess/non stripping heads. Can be used with fibrous materials.
|
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
|
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes. Reduces wood splitting and superior holding power.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes. Reduces wood splitting and superior holding power.
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
Camo Deck Screw, NO 10 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
|
Low-torque threads. Ribbed head design countersinks easily and provides a clean, finished appearance .High-low tip provides fast starts. Optimized threads for dimensional lumber. Quik Guard coating provides corrosion resistance for exterior and certain preservative-treated wood applications. Meets the performance requirements of AC257 exposure conditions 1 and 3. Tan color blends in with most woods.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications, flat head.
|
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes. Reduces wood splitting and superior holding power.
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Camo Deck Screw, Multi-Purpose, NO 10 Screw, 3-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Camo Deck Screw, Multi-Purpose, NO 10 Screw, 3-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
Camo Deck Screw, NO 10 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
|
|
|
