Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS
Choose a sub category:
SPRAY STAIN KILLERS PRIMERS - OIL BASED SHELLAC BASED & ALCOHOL BASED
PRIMERS - WATER BASED WOOD PROTECTORS WOOD PRESERVATIVES
MULTI-SURFACE SEALERS MASONRY SEALERS SANDING SEALERS
FABRIC SEALERS/WATERPROOFERS MISC PRIMERS/SEALERS
Sort By:
1
WaterSeal 10100 Multi-Surface Waterproofer Thompsons TH.010501-18 Sports Seal Fabric Protector Rustoleum Cover-Stain Primer Sealer
Provides proven waterproofing protection for wood, concrete and brick.  Ideal for small exterior projects, such as terra cotta planters, birdhouses and mailbox posts. Provides long-lasting, maximum strength waterproofing protection for outdoor sporting, camping, hunting, and boating surfaces. Penetrates below the surface to protect against moisture damage without leaving surfaces discolored, stiff or sticky. Repels spills and stains. Allows fabric to breathe. Covers approximately 60 sq ft per can. Coverage depends on the condition and porosity of the surface. Rustoleum Primer Sealer, Series: Cover-Stain, 13 oz Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Solvent Odor/Scent, 400 - 450 sq-ft Coverage, 30 min Drying Time, -105 deg C Flash Point, 525 g/l VOC, 40 - 80 deg F, For Cedar and Redwood
Thompsons TH.010502-18 Fabric Seal Fabric Protector PRIMER INTR/EXT ORIG AERO 13OZ WaterSeal TH.024104-14 Multi-Surface Waterproofer
Provides maximum strength waterproofing protection for fabric surfaces such as patio cushions, pillows and umbrellas. Contains UV inhibitors in order to resist color fading caused by the sun. Penetrates below the surface to protect against moisture damage without leaving surfaces discolored, stiff or sticky. Repels spills and stains. Allows fabric to breathe. Covers approximately 60 sq ft per can. Coverage depends on the condition and porosity of the surface. Use on decks & fences, brick patios, concrete driveways, exterior surfaces. Use when mildew/biological factors are not a problem. Prevents water damage. Beads & waterproofs. Allows wood to gray naturally. Actual coverage will vary considerably due to porosity of surface materials. Dries clear.
Kilz 20002 Primer Masterchem 10002 Extra Strength Stain Killer Primer Sealer Kilz Original Interior Low VOC Primer Sealer
Kilz Premium Premium Primer, Kilz Premium, 1 qt Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F Masterchem Primer Sealer, Extra Strength, Stain Killer, Masterchem, 1 qt Capacity, Oil Base, Paste, Almond, Mild Odor/Scent, 26 ft Linear/1/4 in Head Coverage, 1.34 Specific Gravity, 0.14 VOC, 8.5 - 9 pH, 40 - 120 deg F, For Furniture, Drywall, Plaster, Woodwork, Paneling, Glossy Surfaces, Masonry, Brick, and Painted Surfaces Kilz Primer Sealer, Interior Low VOC, Series: Original, 1 qt Capacity, Oil Base, Alkyd Resin, Liquid, Clear, Smoke Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 344 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall
Kilz 13002 Primer Rustoleum Cover-Stain Interior/Exterior Primer Sealer Deft 015-13 Lacquer Sanding Sealer
Kilz Premium Premium Primer, Kilz Premium, 1 qt Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F Rustoleum Primer Sealer, Interior/Exterior, Series: Cover-Stain, 1 qt Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 30 min Drying Time, Application Method: Spray, Roller or Brush, 1.308 Specific Gravity, 83 deg F Flash Point, 425 g/l VOC, 40 - 80 deg F, MPI No 5 Certified, For Cedar and Redwood Formulated to precede the application of Clear Wood Finish Brushing Lacquer. The sanding sealer serves as the base coat and is designed to seal and protect the surface. Ideal for stained or bare wood surfaces, including furniture, floors, cabinets, doors and trim. Seals the wood pores which allows the top coat go further.
Wolman Classic II Woodlife Wood Preservative WATER REPELLENT CAR INTERIOR  SEALER SNDG LACQUER AERSL 12OZ
Wolman Wood Preservative, Water Based, Series: Classic II, Woodlife, 1 qt Capacity, Can Packing, Brush, Roller, Pump Sprayer Dispenser, Liquid, Clear, Mild Odor/Scent, Composition: Ethylene Glycol, 3-Iodo-2-Propynyl Butyl Carbamate, 1.0047 Specific Gravity, >200 deg F Flash Point, <250 g/l VOC, 50 - 90 deg F, EPA Registered, MSHA/NIOSH Approved One-step, superhydrophobic, water repelling treatment designed to keep automotive interiors dry longer. This crystal clear formula preserves upholstery and floor mats against damaging moisture and stains without changing the look or feel of the fabric.  For automotive upholstery, floor mats, carpet, car seats and more. Can be used on leather, cloth, synthetic and natural fibers. Covers 20-50 sq ft. Coverage will vary depending on fabric. Formulated to precede the application of Clear Wood Finish Brushing Lacquer. The sanding sealer serves as the base coat and is designed to seal and protect the surface. Ideal for stained or bare wood surfaces, including furniture, floors, cabinets, doors and trim. Seals the wood pores which allows the top coat go further.
PRIMER INTR/EXTR ORIGINAL 1QT Drylok 27512 Latex Based Masonry Waterproofer Zinsser 02004 Bulls Eye 1-2-3 Primer/Sealer
Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Zinsser Primer Sealer, Series: Bulls-Eye 1-2-3, 1 qt, Water Base, Styrenated Acrylic Resin, Liquid, White Emulsion, Acrylic Like Odor/Scent, 545 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 450 sq-ft/Gal Non-Porous and 350 sq-ft/Gal Porous Surfaces For Practical Coverage At Recommended DFT Coverage, 35 min to Touch, 1 hr to Recoat, 7 Days Full Hardness Drying Time, Application Method: Natural or Synthetic Bristle Brush, Roller, Pad or Sprayer, 1.26 Specific Gravity, >200 Deg F Flash Point, <100 g/l VOC, 9 - 10 pH, 50 - 90 Deg F, Suitable For Use With: Walls, Ceilings, Doors, Trim, Fascia, Soffits, Foundations, Railings and Related Paintable Surfaces, For Interior and Exterior Applications
Zinsser 249019 Bulls Eye Zero Primer/Sealer California 50600-4 Primer/Sealer PRIMER INTERIOR/EXTERIOR 1QT
Zinsser Primer Sealer, Series: Bulls Eye Zero, 1 qt, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 - 45 min to Touch, 1 hr to Recoat Drying Time, 1.273 Specific Gravity, >200 deg F Flash Point, 0 VOC, 50 - 85 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer FixAll Universal Primer, Series: 50600, 1 qt, Water Base, 100 % Acrylic Latex Resin, Viscous Liquid, White, Very Slight Odor/Scent, 300 - 350 sq-ft/Gal Smooth Surface, 175 - 225 sq-ft/Gal Porous Surface Coverage, 1/2 hr to Touch, 4 hr to Handle, 2 hr to Recoat Drying Time, Application Method: Synthetic, Nylon or Polyester Brush, Roller, Airless Spray, 100 g/l VOC, 8.5 pH, < 50 Deg F, Suitable For Use With: Wallboard  Plaster, Sheetrock, Masonry, Wood, Concrete, Galvanized Metal, Plastic Laminates, Vinyl Wall Coverings, Under Wall Coverings As Well As Previously Painted Surfaces, Standards: WHMIS Hazard Class
Kilz 10042 Interior Primer Sealer Zinsser 249727 Smart Prime Primer/Sealer Zinsser 249933 Bulls Eye - 123 Plus Primer/Sealer
Kilz Primer Sealer, Interior, Series: 10042, 1 qt Capacity, Oil Base, Acrylic Resin, Liquid, White, Odorless Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 331 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall Paneling Zinsser Primer Sealer, Series: Smart Prime, 1 qt, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer, For Interior/Exterior Use Zinsser Primer Sealer, Series: Bulls Eye 1-2-3 Plus, 1 qt, Can Packing, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer
Green Products 33004 Wood Preservative Flood/PPG FLD4-01 E-B Emulsa-Bond Bonding Primer Additive Majic 8-1091 Barricade Primer and Paint
Green Products Wood Preservative, Solvent Based, 32 oz Capacity, Can Packing, Brush Dispenser, Liquid, Brown, Pungent Odor/Scent, Composition: Copper Naphthenate, Process Oil, Mineral Spirits, 0.92 Specific Gravity, 150 - 250 deg F Flash Point, 25 - 35 % VOC, Applicable Materials: Wood, Lumber and Plywood, NIOSH Approved, For Window Frames, Doors Flood Paint Additive, 1 qt Capacity, Can, <350 g/l VOC, >21 cSt Viscosity, Liquid, Composition: Solvent Naphtha (Petroleum), Medium Aliph, Nonylphenol, Branched, Ethoxylated, 2-Butanone Oxime, 3-iodo-2-propynyl, Butylcarbamate,  Cobalt Bis(2-ethylhexanoate), Characteristic Odor/Scent, 50 - 90 Deg F, 174.2 Deg F Flash Point, Flammability Rating: 2, 0.95 Specific Gravity, Used in Exterior Latex or Acrylic Paints or Stain Recoating Chalky Aluminum Siding, T1-11 Plywood or Hardboard Siding and Cement Siding Majic Barricade Primer and Paint, Series: 8-1091, Liquid, White, Flat, 1 gal Capacity, Can Packing, Vinyl Acrylic Latex Resin, Water Base, 300 sq-ft/gal Coverage, 50 deg F, >200 deg F Flash Point, 100 g/l VOC, 9.2 pH, 1.2196 Specific Gravity, Typical Latex Odor/Scent, Application Method: Brush, Roller, For Drywall
Deft 015-04 Lacquer Sanding Sealer Wolman Coppercoat Woodlife Wood Preservative California 20701-4 Stain Killer Primer
Formulated to precede the application of Clear Wood Finish Brushing Lacquer. The sanding sealer serves as the base coat and is designed to seal and protect the surface. Ideal for stained or bare wood surfaces, including furniture, floors, cabinets, doors and trim. Seals the wood pores which allows the top coat go further. Wolman Wood Preservative, Water Based, Series: Coppercoat, Woodlife, 1 qt Capacity, Container Packing, Brush, Roller, Pump Sprayer Dispenser, Liquid, Green, Faint Amine Odor/Scent, Composition: Monoethanolamine, Copper Naphthenate, 1.04 - 1.07 Specific Gravity, >200 deg F Flash Point, <250 g/l VOC, 10.1 - 10.9 pH, 50 - 90 deg F, For Docks and Piers FixAll Stain Killer Primer, Series: 20701-4, 1 qt Capacity, Oil/Latex Base, Alkyd Resin, Viscous Liquid, Slight Ammonia Odor/Scent, ANSI Z400.1-2004 Certified
Green Products 33008 Oil Based Wood Preservative Zinsser 00904 B-I-N Primer/Sealer WATER REPELLENT OUTDOOR FABRIC
Green Products Wood Preservative, Oil Based, 14 oz Capacity, Aerosol Can Packing, Sprayer Dispenser, Liquid, Brown, Pungent Odor/Scent, Composition: Copper Naphthenate, Process Oil, Mineral Spirits, 0.92 Specific Gravity, 150 - 250 deg F Flash Point, 25 - 35 % VOC, Applicable Materials: Wood, Lumber and Plywood, NIOSH Approved, For Window Frames Zinsser Primer Sealer, Series: B-I-N, 1 qt, Shellac Resin, Liquid, White, Solvent Like Odor/Scent, 565 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 500 sq-ft/Gal Practical Coverage At Recommended DFT Coverage, 20 min to Touch, 45 min to Recoat, 1-3 Days to Full Cure Drying Time, Application Method: Brush, Roller, Spray, 54 Deg F Flash Point, 584 g/l VOC, 0 - 90 Deg F, Suitable For Use With: Water, Grease, Rust, Smoke, Asphalt, Graffiti and Many Other Types Of Stain, For Interior Applications One-step, superhydrophobic, water repelling treatment designed to keep items dry longer. This crystal clear formula preserves outdoor items against damaging moisture without changing the look or feel of the fabric. For shoes, outdoor patio furniture, backpacks, gloves, camping gear, and more. Covers 20-60 sq ft. Coverage will vary depending on fabric. Not recommended for interior carpet or upholstery.
WATER REPELLENT BOOT/SHOE     WATER REPELENT HUNTING/OUTDOOR Old Masters 45004 Oil Based Sanding Sealer
One-step, superhydrophobic, water repelling treatment designed to keep footwear dry longer. This crystal clear formula preserves footwear against damaging moisture without changing the look or feel of the fabric.  For work boots, tennis shoes, dress and casual shoes, and more. Can be used on leather, suede, nubuck, canvas and more. Covers 20-60 sq ft. Coverage will vary depending on fabric. One-step, superhydrophobic, water repelling treatment designed to keep items dry longer. This crystal clear formula allows fabrics to breathe, while repelling water from the surface.  Preserves outdoor gear against damaging moisture without changing the look or feel of the fabric. Scent-free. For tents, camping gear, hats, hunting boots and apparel. Can be used on polyester, canvas, nylon, suede and more. Covers 20-60 sq ft. Coverage will vary depending on fabric. Seals and protects wood surfaces and can be used to prepare surfaces for the application of a clear topcoat finish. May be applied to all types of bare or stained woods; also recommended as a sandable basecoat or sealer and promotes a smooth, fine finish; contains no stearates.
Zinsser 2241 Bulls Eye Primer/Sealer Varathane 224741H Sanding Sealer Zinsser Bulls Eye SealCoat Sanding Sealer
Zinsser Primer Sealer, Series: Bulls Eye, 1 gal, Can Packing, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.383 Specific Gravity, >200 deg F Flash Point, 95 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer Universal sealer formulated to work under all clear wood finishes, Oil or water-based polyurethane, lacquers and shellac. Seals wood and is easy to sand. Low odor. Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Apply over new wood or over existing finishes. Compatible with all clear finishes. Tough, non-yellowing finish. Dries in minutes; easy to sand; recoat in less than 1 hour.
Minwax 65700 Sanding Sealer Zinsser Bulls Eye SealCoat Oil Based Wood Sealer Wolman Classic II Woodlife Wood Preservative
Clear sealer formulated for application over bare wood. Seals wood grain. Designed to be sanded providing a smooth finish. Can be top coated with any Minwax oil or water-based polyurethane finish. Covers approximately 500 sq. ft. per gallon. Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Compatible with all clear finishes, including oil- and water-based polyurethane, lacquer and shellac. Can be used on new wood or over existing finishes. Use in SCAQMD regulated areas. Tough, non-yellowing finish. Covers approximately 400-600 sq. ft. per gallon depending on application method and surface. Wolman Wood Preservative, Water Based, Series: Classic II, Woodlife, 1 gal Capacity, Can Packing, Brush, Roller, Pump Sprayer Dispenser, Liquid, Clear, Mild Odor/Scent, Composition: Ethylene Glycol, 3-Iodo-2-Propynyl Butyl Carbamate, 1.0047 Specific Gravity, >200 deg F Flash Point, <250 g/l VOC, 50 - 90 deg F, EPA Registered, MSHA/NIOSH Approved
California 50500-4 Primer/Sealer Rustoleum 247596 Magnetic Primer Weiman 5092 Stone Spray-N-Seal Penetrating Sealer
FixAll Bonding Primer, Series: Grip-Coat 50500, 1 qt, Water Base, Urethane-Modified Acrylic Resin, Viscous Liquid, White, Slight Ammoniacal Odor/Scent, 400 - 450 sq-ft/Gal Smooth Surface, 200 - 275 sq-ft/Gal Porous Surface Coverage, 1 hr to Touch, 6 hr to Handle, 4 hr to Recoat Drying Time, Application Method: Synthetic, Nylon or Polyester Brush, Roller, Airless Spray, 100 g/l VOC, < 50 Deg F, Suitable For Use With: PVC, Glass, Fiberglass, Glossy Paints, Tile Or Glazed Block, Galvanized Metal, Aluminum, Copper, Lead and Tin Rust-Oleum Magnetic Primer, Series: Specialty, 1 qt, Oil Base, Modified Alkyd Resin, Liquid, Solvent Like Odor/Scent, 39 - 48 sq-ft/qt Coverage, 30 Min To Touch, 1 hr To Handle, 30 Min To Recoat Drying Time, Application Method: Foam Roller, > 200 Deg F Flash Point, < 420 g/l VOC, > 120 Deg F, For Interior Use Protects natural stone surfaces from staining. For stone countertops, floors, walls, vanities and even grout. Also for sealing all types of masonry, stucco, concrete and sanded grout. Has special blend of polymers that bond to the stone and creates a water and oil repellant membrane to prevent staining and allows the stone to breathe and release moisture vapors. Safe for interior and exterior use and is UL Classified for slip resistance. Coverage varies depending on surface.
PRIMER UNDERLAYMENT LEVEL 1GAL Damtite 01071 Waterproofer Powder PRIMER LATEX INT ZERO VOC GAL
Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2). Valspar Latex Primer, Series: Professional, 1 Gal, Container, Vinyl Acrylic Resin, Liquid, White, Slight Odor/Scent, 300 - 400 sq-ft/Gal Coverage, 30 - 60 min Drying Time, Application Method: Airless Spray, Brush, Roller, 205 Deg F Flash Point, 50 - 90 Deg F, Standards: SCAQMD, CARB 2000 SCM, CARB 2007 SCM, OTC/LADCO, US National Regulatory Compliance, UL GreenGuard Gold, LEED (US), LEED (Canada), MPI 50, MPI 50 X-Green, MPI 149, MPI 149 X-Green Certification
Zinsser Gardz Problem Surface Sealer Quikrete 8730-02 Concrete Cure and Seal Wolman Coppercoat Woodlife Wood Preservative
Zinsser Problem Surface Sealer, Water Based, Series: Gardz, 1 gal Capacity, Can Packing, 53 g/l VOC, Liquid, Clear, Matte, 350 - 450 sq-ft/gal Coverage, Ammonia Odor/Scent, >200 deg F Flash Point, 1.012 Specific Gravity, Application Method: Brush, Roller, Spray, 50 - 90 deg F, Resists: Water, 5-Chloro-2-Methyl-4-Isothiazolin-3-One, Plaster Protects and seals concrete surfaces against water, salt, grease, etc. Promotes proper curing by retaining water in freshly placed concrete. Used for curing new concrete. Wolman Wood Preservative, Water Based, Series: Coppercoat, Woodlife, 1 gal Capacity, Container Packing, Brush, Roller, Pump Sprayer Dispenser, Liquid, Green, Faint Amine Odor/Scent, Composition: Monoethanolamine, Copper Naphthenate, 1.04 - 1.07 Specific Gravity, >200 deg F Flash Point, <350 g/l VOC, 10.1 - 10.9 pH, 50 - 90 deg F, Fence Posts, Poles
Wolman RainCoat Oil Based Water Repellent Preservative Cabot 1000 Waterproofing Sealer Henry PR1760074 Premier Foundation Coating
Wolman Water Repellent Preservative, Oil Based, Series: RainCoat, 1 gal Capacity, Container Packing, Brush, Roller, Pump Sprayer Dispenser, Liquid, Clear, Solvent Like Odor/Scent, Composition: Hydrotreated Light Distillate, Octamethylcyclotetrasiloxane, Stoddard Solvent, Solvent Naphtha, Light Aromatic, 0.899 Specific Gravity, 104 deg F Flash Point Water-based silicone coating. Designed to provide protection on a multitude of surfaces by coating the pores of the substrates with silicone. For use on wood, brick, concrete and masonry. Penetrates and fills the pores of the substrate with premium grade silicon sealer. Ideal for new or properly reconditioned decks, fences, siding, shingles, shakes and logs. Covers 100-250 sq. ft. per gallon. Rates will vary depending on porosity of the surface. Environmentally friendly. Asphalt emulsion. For spray or brush application to existing or new, green or damp concrete and masonry surfaces. For below grade applications to foundations, both poured concrete and CMU block. No odor, soap and water cleanup.
Damtite 03550 Masonry Waterproofer Zinsser 5001 Watertite Waterproofing Paint Henry RC065070 Roofers Choice Foundation Coating
High performance masonry waterproofer used for above or below grade applications. Alkali-resistant coating provides excellent waterproofing protection with a decorative finish for all masonry, cinder and concrete block, poured concrete, brick, stucco. Use on basement walls, retaining walls, fountains, birdbaths, planters and more. Fast drying, low odor and tintable to light pastel shades. Easy clean up. Reduces Radon Gas penetration through concrete block walls. Covers up to 150 sq. ft. (11.6 m2) per gallon. Guaranteed to stop up to 34psi of water pressure - twice the strength of other waterproofers. Prevents the growth of mold and mildew on the paint film for up to 5 years. Smooth, non-gritty finish applies easily to wet or dry walls. Ultra low odor oil-base formula has even less odor than latex paint. Great for basements and other interior/exterior above and below grade masonry surfaces. Watertite contains a mildewcide that prevents the growth of mold and mildew on the paint film only. Cures to a tough, flexible, weather resistant film. Because of its ability to retain its pliability, the coating resists damage which may result from expansion and contraction caused by weather and temperature variation. Use as an exterior underground foundation coating and dampproofer for brick, concrete, cement block, and similar surfaces. May be used as an underground exterior foundation coating and dampproofer. Covers approximately 1 to 2 gallons per 100 square feet.
Wolman Creocoat Woodlife Wood Preservative United Gilsonite 22113 Masonry Waterproofer Rustoleum 286258 Bulls Eye ? 123 Plus Primer/Sealer
Wolman Wood Preservative, Water Based, Series: Creocoat, Woodlife, 1 gal Capacity, Brush, Roller, Pump Sprayer Dispenser, Liquid, Black, Faint Amine Odor/Scent, Composition: Monoethanolamine, Copper Naphthenate, 1.04 - 1.07 Specific Gravity, >200 deg F Flash Point, <320 g/l VOC, 10.1 - 10.9 pH, 50 - 90 deg F, EPA Registered, NIOSH Approved, Roofs Protective coating for masonry surfaces. Prevents moisture damage. Penetrates deep to seal and protects masonry against acids, alkalis, household chemicals, gasoline, oil and salt. Covers up to 400 sq. ft. per gallon depending on surface porosity. Zinsser Primer, Series: Bulls-Eye 1-2-3?, All-Purpose, 1 qt, Container, Water Base, Styrene Acrylic Copolymer Resin, Liquid, Gray, Flat/Matte, Solvent Like Odor/Scent, 400 - 450 sq-ft/Gal Coverage, 30 min Drying Time, Application Method: Brush, Roll, Spray, 94 Deg C Flash Point, 82 g/l VOC, 50 - 90 Deg F, Suitable For Use With: New or Previously Painted Drywall, Concrete, Wood, Masonry, Metal and Glossy or Difficult Surfaces
Gardner-Gibson 0125-GA Roof And Foundation Coating Majic 8-1091 Barricade Primer and Paint Rustoleum 285085 Bulls Eye ? 123 Plus Primer/Sealer
A thin liquid applied coating designed to seal and penetrate exterior concrete and masonry surfaces while providing a moisture barrier. It can also be used as an anti-corrosive coating for below grade steel or metal piping. Seals and protects wood footings from decay and termites. Covers approximately 70 sq. ft. per gallon. Majic Barricade Primer and Paint, Series: 8-1091, Liquid, White, Flat, 5 gal Capacity, Can Packing, Vinyl Acrylic Latex Resin, Water Base, 300 sq-ft/gal Coverage, 50 deg F, >200 deg F Flash Point, 100 g/l VOC, 9.2 pH, 1.2196 Specific Gravity, Typical Latex Odor/Scent, Application Method: Brush, Roller, For Drywall Zinsser Primer, Series: Bulls-Eye 1-2-3?, All-Purpose, 1 Gal, Container, Water Base, Styrene Acrylic Copolymer Resin, Liquid, Gray, Flat/Matte, Solvent Like Odor/Scent, 400 - 450 sq-ft/Gal Coverage, 30 min Drying Time, Application Method: Brush, Roll, Spray, 94 Deg C Flash Point, 84 g/l VOC, 50 - 90 Deg F, Suitable For Use With: New or Previously Painted Drywall, Concrete, Wood, Masonry, Metal and Glossy or Difficult Surfaces
Damtite 01501 Waterproof Coating Henry PR175070 Premier Foundation Coating Zinsser 02025 Bulls Eye 1-2-3 Primer/Sealer
Economical, heavy-duty, Portland cement-base coating to seal and protect concrete, masonry, brick, stone and stucco. Apply to wet or dry walls. Breathable coating so no moisture becomes trapped behind the surface. Holds back 12 PSI water pressure. Heavy duty formula. Can be used as an exterior, below grade foundation sealer on concrete block or poured concrete, prior to applying asphaltic-base coatings. Also for sealing and beautifying basement & garage walls, retaining & sea walls; Safe for coating the inside of cisterns for drinking water. A cold applied liquid asphalt in a solvent system. Penetrating type coating formulated to provide a durable, weather resistant film. For long-wearing protection of foundation coating. Also use to dampproofing above and below grade exterior concrete and masonry walls and foundations that are thoroughly dry. Covers 1.5 to 2.0 gallons per 100 sq. ft. depending upon the porosity and roughness of the surface. Zinsser Primer Sealer, Series: Bulls Eye 1-2-3, 2.5 gal, Water Base, Styrenated Acrylic Resin, White, 450 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.26 Specific Gravity, >200 deg F Flash Point, <100 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Brush, Roller, Sprayer, For Interior/Exterior Use
Damtite 02501 Waterproof Coating Damtite 01211 Waterproofer Powder Henry PR175042 Premier Foundation Coating
Economical, heavy-duty, Portland cement-base coating to seal and protect concrete, masonry, brick, stone and stucco. Apply to wet or dry walls. Breathable coating so no moisture becomes trapped behind the surface. Holds back 12 PSI water pressure. Heavy duty formula. Can be used as an exterior, below grade foundation sealer on concrete block or poured concrete, prior to applying asphaltic-base coatings. Also for sealing and beautifying basement & garage walls, retaining & sea walls; Safe for coating the inside of cisterns for drinking water. Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2). A cold applied liquid asphalt in a solvent system. Penetrating type coating formulated to provide a durable, weather resistant film. For long-wearing protection of foundation coating. Also use to dampproofing above and below grade exterior concrete and masonry walls and foundations that are thoroughly dry. Covers 1.5 to 2.0 gallons per 100 sq. ft. depending upon the porosity and roughness of the surface.
Zinsser 249729 Smart Prime Primer/Sealer Drylok 27613 Latex Based Masonry Waterproofer Drylok 27513 Ready-To-Use Concrete Sealer
Zinsser Primer Sealer, Series: Smart Prime, 1 gal, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer, For Interior/Exterior Use Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity.
Zinsser 249020 Bulls Eye Zero Primer/Sealer Zinsser 249937 Bulls Eye - 123 Plus Primer/Sealer PRIMER SEALER WATER BS VOC GA
Zinsser Primer Sealer, Series: Bulls Eye Zero, 1 gal, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 - 45 min to Touch, 1 hr to Recoat Drying Time, 1.273 Specific Gravity, >200 deg F Flash Point, 0 VOC, 50 - 85 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer Zinsser Primer Sealer, Series: Bulls Eye 1-2-3 Plus, 1 gal, Can Packing, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer Zinsser Primer Sealer, Series: Cover-Stain, 1 gal, Water Base, Modified Alkyd Polymer Solution Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.339 Specific Gravity, >200 deg F Flash Point, 28 g/l VOC, 40 - 90 deg F, Suitable For Use With: Brush, Roller, Pad or Sprayer
Drylok 27514 Latex Based Masonry Waterproofer Rustoleum 276087 Primer PRIMER INTERIOR WHITE 5GAL
Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Zinsser Mold Killing Primer, 1 qt, Water Base, Styrene Acrylic Resin, Liquid, White, Solvent Like Odor/Scent, 624 sq-ft/gal Theoretical Coverage, 400 - 450 sq-ft/gal Practical Coverage Coverage, 30 Min To Touch, 1 hr To Handle, 1 hr To Recoat, 7 Days To Cure Completely Drying Time, Application Method: Brush, Roller, Spray, > 200 Deg F Flash Point, 1 g/l VOC, 40 - 80 Deg F, Suitable For Use With: All Existing Mold, Mildew, Moss, Fungi, Odor Causing Bacteria and Any Other Fungal Organisms, Used On Non-Porous Interior and Exterior, Residential, Commercial and Industrial Applications and Can Be Applied In Factories, Warehouses, Storage Facilities, Refrigerated Storage Facilities, Office Buildings, Residential Living, Schools, Hospitals, Veterinary Care Facilities, Elderly Care Facilities, Prisons and Correction Facilities, Wash Houses, Restaurants, Fitness Centers and Locker Rooms, Attics, Basements, Window Frames, Bathrooms, Wall Cavities, Base-Boards, Sub-Floors and Table Tops
Zinsser 01501 Drywall Primer WaterSeal 24111 Multi-Surface Waterproofer Prep-Step 44-981 Exterior Primer
Zinsser Primer Sealer, 1 gal, Water Base, Acrylic Resin, Liquid, White, Solvent Like Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.244 Specific Gravity, >200 deg F Flash Point, 96 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer Use on decks & fences, brick patios, concrete driveways, exterior surfaces. Use when mildew/biological factors are not a problem. Prevents water damage. Beads & waterproofs. Allows wood to gray naturally. Actual coverage will vary considerably due to porosity of surface materials. Dries clear. Prep-Step Primer, Exterior, Series: 44-981, 1 qt Capacity, Pail Packing, Latex Base, Acrylic Resin, Liquid, White, 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 1.27 Specific Gravity, 205 deg F Flash Point, <50 g/l VOC, 50 - 90 deg F, LEED Certified, CARB 2000 SCM, 94 - 102 Krebs Units, For Bare Wood
Rustoleum Cover-Stain High Hide Stain Blocking Primer Majic Paints 8-0165-1 Waterproofing Sealer Rustoleum Cover-Stain Interior/Exterior Primer
Rustoleum Stain Blocking Primer, High Hide, Series: Cover-Stain, 1 gal Capacity, Pail Packing, Low VOC Modified Alkyd Base Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 400 sq-ft Coverage, 30 min Drying Time, Application Method: Brush, Roller, Pad, Sprayer, 1.248 Specific Gravity, >200 deg F Flash Point, 100 g/l VOC, 40 - 90 deg F, Walls, Trim Provides a water-tight shield for wood, canvas, masonry and concrete. Dries to a clear matte finish that prevents moisture from seeping into the surface. Dry time-touch 48 hours for traffic, recoat 4-24 hours. Covers 75 to 150 sq ft per gallon. Soap and water clean up. Rustoleum Primer, Interior/Exterior, Series: Cover-Stain, 3 gal Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 400 - 500 sq-ft/gal Coverage, 30 min Drying Time, Application Method: Spray, Roller or Brush, 1.308 Specific Gravity, 83 deg F Flash Point, 450 g/l VOC, 40 - 80 deg F, For Wood, Masonry
Rustoleum 276049 Primer SEALER CONCRETE WET LOOK 1 GAL SEALER CONCRETE NATRAL LOOK 1G
Zinsser Mold Killing Primer, 1 gal, Water Base, Styrene Acrylic Resin, Liquid, White, Mild Odor/Scent, 624 sq-ft/gal Theoretical Coverage, 400 - 450 sq-ft/gal Practical Coverage Coverage, 30 Min To Touch, 1 hr To Handle, 1 hr To Recoat, 7 Days To Cure Completely Drying Time, Application Method: Brush, Roller, Spray, > 200 Deg F Flash Point, 1 g/l VOC, 40 - 80 Deg F, Suitable For Use With: All Existing Mold, Mildew, Moss, Fungi, Odor Causing Bacteria and Any Other Fungal Organisms, Used On Non-Porous Interior and Exterior, Residential, Commercial and Industrial Applications and Can Be Applied In Factories, Warehouses, Storage Facilities, Refrigerated Storage Facilities, Office Buildings, Residential Living, Schools, Hospitals, Veterinary Care Facilities, Elderly Care Facilities, Prisons and Correction Facilities, Wash Houses, Restaurants, Fitness Centers and Locker Rooms, Attics, Basements, Window Frames, Bathrooms, Wall Cavities, Base-Boards, Sub-Floors and Table Tops Seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals, and UV light. For use on driveways, patios, walkways, pool decks, basements and more. Provides a protective barrier to keep water out, protect against stains, and extend the life of your concrete while leaving a ?wet look?, high gloss finish. Seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals, and UV light. For use on driveways, patios, walkways, pool decks, basements and more. Provides a protective barrier to keep water out, protect against stains, and extend the life of your concrete while leaving a ?natural look?, low gloss finish.
Drylok 28613 Latex Based Masonry Waterproofer PRIMER INTR BLCK FLLR WHT 5GAL SEALER CONCRETE CLEAR GAL
SEALER CONCRETE CLEAR GAL
Our Price: $67.99
For the most demanding conditions. For above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco and brick. Formulated to resist mildew growth on the paint film. Stops 15 psi. Passes ASTM D-7088 Resistance to Hydrostatic pressure and ASTM D-6904 resistance to wind driven rain. Covers 75 to 125 sq. ft per gallon depending on surface porosity. High-performance, high solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces.
SEALER CONCRETE GRAY GAL      PRIMER INTERIOR STANDARD 5GAL Majic Paints 8-0165-5 Waterproofing Sealer
SEALER CONCRETE GRAY GAL
Our Price: $67.99
High-performance, high solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces. Provides a water-tight shield for wood, canvas, masonry and concrete. Dries to a clear matte finish that prevents moisture from seeping into the surface. Dry time-touch 48 hours for traffic, recoat 4-24 hours. Covers 75 to 150 sq ft per gallon. Soap and water clean up.
Zinsser 01500 Drywall Primer MOISTURE STOP 1 GALLON        PRIMER INTERIOR STANDARD 1GAL
MOISTURE STOP 1 GALLON
Our Price: $69.99
Zinsser Primer Sealer, 5 gal, Water Base, Acrylic Resin, Liquid, White, Solvent Like Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.244 Specific Gravity, >200 deg F Flash Point, 96 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer For use on concrete prior to coating. Penetrates into concrete and reacts with the free calcium and water to form a gel in cracks, pores and capillaries to protect against the ingress of water and contaminants. This allows surfaces that were previously uncoatable, due to moisture, to be coated. Strengthens and seals from the inside out.
Rustoleum 249332 Automotive Primer Surfacers Valspar 7276 Multi-Surface Waterproofing Sealer WaterSeal 24106 Multi-Surface Waterproofer
Rust-Oleum Primer Surfacer, Automotive, 1 gal, Oil Base, Alkyd Modified Acrylic Resin, Liquid, Light Gray, Solvent Like Odor/Scent, 652 sq-ft/gal Theoretical Coverage, 40 - 50 sq-ft/qt Practical Coverage Coverage, 10 - 15 Min To Touch, 20 Min To Handle Drying Time, Application Method: Spray, 35 Deg F Flash Point, 516 g/l VOC, > 120 Deg F, For Exterior Applications Beads water to resist moisture damage. Dries to clear finish, soap and water clean up. Use on wood, brick, concrete, masonry, stucco and porous surfaces. Use on decks & fences, brick patios, concrete driveways, exterior surfaces. Use when mildew/biological factors are not a problem. Prevents water damage. Beads & waterproofs. Allows wood to gray naturally. Actual coverage will vary considerably due to porosity of surface materials. Dries clear.
PRIMER SEALER STAIN OIL 1-GAL Kilz 20041 Primer Kilz Original Interior Primer Sealer Stain Blocker
Zinsser Primer/Sealer Stain Oil, Series: Cover Stain, Classic, 1 Gal, Container, Oil Base, Low-VOC Modified Alkyd Resin, Liquid, White, Solvent Like Odor/Scent, 1062 sq-ft/Gal Coverage, 2 hr Drying Time, Application Method: Surface Preparation, Priming, Mixing, Stain Blocking, Sealing, 39 Deg C Flash Point, 102 g/l VOC, 40 - 90 Deg F, Suitable For Use With: Any Topcoat Kilz Premium Premium Primer, Kilz Premium, 1 gal Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F Kilz Primer Sealer Stain Blocker, Interior, Series: Original, 1 gal Capacity, Oil Base, Alkyd Resin, Liquid, White, Smoke Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 75 deg F Flash Point, 443 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces
WaterSeal 21801/21802 Waterproof Wood Sealer Rustoleum Bulls Eye Interior Primer Sealer Rustoleum 270976 B-I-N - Advanced Primer/Sealer
WaterSeal Wood Sealer, Waterproof, 1 gal Capacity, Container Packing, Paint Pad, Brush, Sprayer, Roller Dispenser, Viscosity Liquid, Clear, Mineral Spirit Odor/Scent, Composition: Paraffin Oil, 0.86 Specific Gravity, 175 deg F Flash Point, 4 % VOC, >5 deg C, Applicable Materials: Wood, Brick, Concrete, Clay/Quarry Tile and Weatherboard, Fences Rustoleum Primer Sealer, Interior, Series: Bulls Eye, 1 gal Capacity, Oil Base, Modified Alkyd Resin, Liquid, White, Flat, Mild Odor/Scent, 400 sq-ft Coverage, 40 min Drying Time, 1.583 Specific Gravity, 104 deg F Flash Point, 328 g/l VOC, 40 - 90 deg F, MPI No 61 Certified, For Walls and Trim Zinsser Primer Sealer, Series: B-I-N Advanced, Synthetic Shellac, 1 gal, Can Packing, Water Base, Acrylic Resin, Liquid, White, Solvent Like Odor/Scent, 25 min to Touch, 45 min to Recoat Drying Time, 1.296 Specific Gravity, 94 deg C Flash Point, 96 g/l VOC, 50 - 90 deg F, For Interior/Exterior Use
Kilz Original Interior Low VOC Primer Sealer Damtite 02451 Waterproofer Powder Rustoleum Cover-Stain Interior/Exterior Primer Sealer
Kilz Primer Sealer, Interior Low VOC, Series: Original, 1 gal Capacity, Oil Base, Alkyd Resin, Liquid, Clear, Smoke Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 344 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2). Rustoleum Primer Sealer, Interior/Exterior, Series: Cover-Stain, 1 gal Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 30 min Drying Time, Application Method: Spray, Roller or Brush, 1.308 Specific Gravity, 23 deg C Flash Point, 425 g/l VOC, 40 - 80 deg F, MPI No 5 Certified, For Cedar and Redwood
Valspar 7276 Multi-Surface Waterproofing Sealer Masterchem Industries 20000 2-Latex Sealer Primer PRIMER/SEALR HIGH HLD WHT 1GAL
Beads water to resist moisture damage. Dries to clear finish, soap and water clean up. Use on wood, brick, concrete, masonry, stucco and porous surfaces. Masterchem Industries Sealer Primer, Series: 2, Latex, 5 gal, Water Base, Liquid, White, Slight Odor/Scent, 400 sq-ft Coverage, 1 hr Drying Time, Application Method: Brush, Roller and Spray, 96 g/L VOC, 7 - 10 pH, 50 - 90 deg F, SCAQMD, CARB, OTC, LADCO, AIM, Leed Certified, For Interior and Exterior Applications
Kilz Original Interior Primer Sealer Stain Blocker WaterSeal 21806 Waterproof Wood Protector Zinsser 256261 Bondz Primer/Sealer
Kilz Primer Sealer Stain Blocker, Interior, Series: Original, 5 gal Capacity, Oil Base, Alkyd Resin, Liquid, White, Smoke Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 75 deg F Flash Point, 443 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces WaterSeal Wood Protector, Waterproof, 6 gal Capacity, Container Packing, Paint Pad, Brush, Sprayer, Roller Dispenser, Viscosity Liquid, Clear, Mineral Spirit Odor/Scent, Composition: Paraffin Oil, 0.86 Specific Gravity, 175 deg F Flash Point, 4 % VOC, >5 deg C, Applicable Materials: Wood, Brick, Concrete, Clay/Quarry Tile and Weatherboard, Fences Zinsser Primer Sealer, Series: Bondz, Maximum Adhesion, 1 gal, Water Base, Acrylic Resin, Liquid, White, Solvent Like Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr (Most Paints)/6 hr (Epoxies) to Recoat Drying Time, 1.219 Specific Gravity, >200 deg F Flash Point, 81 g/l VOC, 36 - 90 deg F, For Interior/Exterior Use
Zinsser Bulls Eye SealCoat Sanding Sealer Zinsser SealCoat Interior Sanding Sealer Rustoleum Cover-Stain High Hide Primer Sealer
Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Apply over new wood or over existing finishes. Compatible with all clear finishes. Tough, non-yellowing finish. Dries in minutes; easy to sand; recoat in less than 1 hour. Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Compatible with all clear finishes, including oil- and water-based polyurethane, lacquer and shellac. Can be used on new wood or over existing finishes. Use in SCAQMD regulated areas. Tough, non-yellowing finish. Covers approximately 400-600 sq. ft. per gallon depending on application method and surface. Rustoleum Primer Sealer, High Hide, Series: Cover-Stain, 1 gal Capacity, Oil Base, VT Modified Alkyd Resin, Liquid, White, Flat/Matte, Solvent Odor/Scent, 300 - 400 sq-ft Coverage, 35 min Drying Time, Application Method: Spray, Roller or Brush, 1.491 Specific Gravity, 105 deg F Flash Point, 332 g/l VOC, 40 - 90 deg F, MPI No 5 Certified
Kilz Original Interior Low VOC Primer Sealer Zinsser 02000 Bulls Eye 1-2-3 Primer/Sealer Waterseal TH.041811-16 Transparent Waterproofing Stain
Kilz Primer Sealer, Interior Low VOC, Series: Original, 5 gal Capacity, Oil Base, Alkyd Resin, Liquid, Clear, Smoke Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 344 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall Zinsser Primer Sealer, Series: Bulls Eye 1-2-3, 5 gal, Water Base, Styrenated Acrylic Resin, Liquid, White Emulsion, Acrylic Like Odor/Scent, 450 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.26 Specific Gravity, >200 deg F Flash Point, <100 g/l VOC, 9 - 10 pH, 50 - 90 deg F, Suitable For Use With: Synthetic Brush, Roller, Sprayer Waterseal Waterproofing Stain, Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Harvest Gold, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood
Waterseal TH.041821-16 Transparent Waterproofing Stain Waterseal TH.041831-16 Transparent Waterproofing Stain Waterseal TH.041841-16 Transparent Waterproofing Stain
Waterseal Waterproofing Stain, Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Maple Brown, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Sequoia Red, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Acorn Brown, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood
Waterseal TH.041851-16 Transparent Waterproofing Stain PRIMER HIBUILD SLVR WHITE 5GAL PRIMER/SEALR HIGH HLD WHT 5GAL
Waterseal Waterproofing Stain, Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Woodland Cedar, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood
Kilz 13041 Primer Varathane 224740 Sanding Sealer PRIMER INTERIOR LATEX WHT 1GAL
Kilz Premium Premium Primer, Kilz Premium, 1 gal Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F Universal sealer formulated to work under all clear wood finishes, Oil or water-based polyurethane, lacquers and shellac. Seals wood and is easy to sand. Low odor.
Rustoleum Cover-Stain Interior/Exterior Primer Sealer SEALER WOOD CLEAR ONECOAT 1GAL PRIMER INTR/EXTR ORIGINAL 1GAL
Rustoleum Primer Sealer, Interior/Exterior, Series: Cover-Stain, 5 gal Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 30 min Drying Time, Application Method: Spray, Roller or Brush, 1.308 Specific Gravity, 83 deg F Flash Point, 425 g/l VOC, 40 - 80 deg F, MPI No 5 Certified, For Cedar and Redwood WOLMAN Wood Sealer, Series: RainCoat, 1 gal Capacity, Liquid, Clear, Mild Odor/Scent, Composition: 2,2,4-Trimethyl-1,3-Pentanediol Isobutyrate, 3-Iodo-2-Propynyl butylcarbamate, 94 Deg C Flash Point, 373 g/l VOC, 250 sq-ft Coverage Area, Used To Protect Decks, Porches, Fences, Shake, Shingle and Clapboard Siding, Boat Decks, Boardwalks, Outdoor Furniture, Gazebos, Arbors and Trellises and Storage Sheds
Zinsser 02001 Bulls Eye 1-2-3 Primer/Sealer Damtite 01451 Waterproofer Powder Masterchem Industries 13000 Sealer Primer
Zinsser Primer Sealer, Series: Bulls-Eye 1-2-3, 1 Gal, Water Base, Styrenated Acrylic Resin, Liquid, White Emulsion, Acrylic Like Odor/Scent, 545 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 450 sq-ft/Gal Non-Porous and 350 sq-ft/Gal Porous Surfaces For Practical Coverage At Recommended DFT Coverage, 35 min to Touch, 1 hr to Recoat, 7 Days Full Hardness Drying Time, Application Method: Natural or Synthetic Bristle Brush, Roller, Pad or Sprayer, 1.26 Specific Gravity, >200 Deg F Flash Point, <100 g/l VOC, 9 - 10 pH, 50 - 90 Deg F, Suitable For Use With: Walls, Ceilings, Doors, Trim, Fascia, Soffits, Foundations, Railings and Related Paintable Surfaces, For Interior and Exterior Applications Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2). Masterchem Industries Sealer Primer, Premium, 5 gal, Water Base, Liquid, White, Slight Odor/Scent, 400 sq-ft Coverage, 1 hr Drying Time, Application Method: Brush, Roller and Spray, <5 g/L VOC, 8.5 - 9.5 pH, 50 - 90 deg F, SCAQMD, CARB, OTC, LADCO, AIM, Leed Certified, For Interior and Exterior Applications
Rustoleum Cover-Stain High Hide Primer Sealer PRIMER SEALER 123 DEEP TINT GA WaterSeal TH.023111-03 Waterproofer Masonry Protector
Rustoleum Primer Sealer, High Hide, Series: Cover-Stain, 5 gal Capacity, Oil Base, VT Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 300 - 400 sq-ft Coverage, 35 min Drying Time, Application Method: Spray, Roller or Brush, 1.49 Specific Gravity, 103 deg F Flash Point, 332 g/l VOC, 40 - 90 deg F, MPI No 5 Certified Zinsser Primer Sealer, Series: Bulls Eye 1-2-3, Deep Tint, 1 gal, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 450 sq-ft Coverage, 35 min to Touch, 1 hr to Recoat Drying Time, 1.258 Specific Gravity, >200 deg F Flash Point, 65 g/l VOC, 50 - 90 deg F, Suitable For Use With: Natural or Synthetic Bristle Brush, Roller, Pad or Sprayer Provides protection for all masonry surfaces. Prevents water damage. Coating resists mildew and UV damage. Helps maintain natural color of surface. Dries clear. Cover approximately 50-375 sq ft per gal. coverage will vary due to the type of pavers and porosity of surface material.
Zinsser 60001 Peel Stop Primer/Sealer Rustoleum 285090 Bulls Eye ? 123 Plus Primer/Sealer PRIMER SEALER WATER BS VOC 5G
Zinsser Primer Sealer, Series: Peel Stop, Clear Binding, 1 gal, Water Base, Vinyl Acrylic Copolymer Resin, Liquid, White, Mild Odor/Scent, 300 - 400 sq-ft Coverage, 30 to Touch, 2 hr to Recoat Drying Time, 1.049 Specific Gravity, >200 deg F Flash Point, 98 g/l VOC, 50 - 90 deg F, For Interior/Exterior Use Zinsser Primer, Series: Bulls-Eye 1-2-3?, All-Purpose, 5 Gal, Container, Water Base, Styrene Acrylic Copolymer Resin, Liquid, Gray, Flat/Matte, Solvent Like Odor/Scent, 400 - 450 sq-ft/Gal Coverage, 30 min Drying Time, Application Method: Brush, Roll, Spray, 94 Deg C Flash Point, 84 g/l VOC, 50 - 90 Deg F, Suitable For Use With: New or Previously Painted Drywall, Concrete, Wood, Masonry, Metal and Glossy or Difficult Surfaces Zinsser Primer Sealer, Series: Cover-Stain, 5 gal, Water Base, Modified Alkyd Polymer Solution Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.339 Specific Gravity, >200 deg F Flash Point, 28 g/l VOC, 8.5 - 9.5 pH, 40 - 90 deg F, Suitable For Use With: Brush, Roller, Pad or Sprayer
SEALER WOOD NATURAL CEDAR 1GAL SEALER WOOD NATURAL CEDAR 5GAL SEALER WOOD NATURAL RED 1GAL
WOLMAN Wood Sealer, Series: RainCoat, 1 gal Capacity, Liquid, Natural Cedar, Mild Odor/Scent, Composition: Ethylene Glycol Monobutyl Ether, 2,2,4-Trimethyl-1,3-Pentanediol Isobutyrate, 3-Iodo-2-Propynyl butylcarbamate, 94 Deg C Flash Point, 349 g/l VOC, 250 sq-ft Coverage Area, Used To Protect Decks, Porches, Fences, Shake, Shingle and Clapboard Siding, Boat Decks, Boardwalks, Outdoor Furniture, Gazebos, Arbors and Trellises and Storage Sheds WOLMAN Wood Sealer, Series: RainCoat, 5 gal Capacity, Liquid, Natural Cedar, Mild Odor/Scent, Composition: Ethylene Glycol Monobutyl Ether, 2,2,4-Trimethyl-1,3-Pentanediol Isobutyrate, 3-Iodo-2-Propynyl butylcarbamate, 94 Deg C Flash Point, 349 g/l VOC, 250 sq-ft Coverage Area, Used To Protect Decks, Porches, Fences, Shake, Shingle and Clapboard Siding, Boat Decks, Boardwalks, Outdoor Furniture, Gazebos, Arbors and Trellises and Storage Sheds WOLMAN Wood Sealer, Series: RainCoat, 5 gal Capacity, Liquid, Natural Redwood, Mild Odor/Scent, Composition: Ethylene Glycol Monobutyl Ether, 2,2,4-Trimethyl-1,3-Pentanediol Isobutyrate, 3-Iodo-2-Propynyl butylcarbamate, 94 Deg C Flash Point, 337 g/l VOC, 250 sq-ft Coverage Area, Used To Protect Decks, Porches, Fences, Shake, Shingle and Clapboard Siding, Boat Decks, Boardwalks, Outdoor Furniture, Gazebos, Arbors and Trellises and Storage Sheds
Green Products COPPER 1 Wood Preservative PRIMER INTR/EXTR ORIGINAL 5GAL PRIMER INTERIOR LATEX WHT 5GAL
Green Products Wood Preservative, Solvent Based, 1 gal Capacity, Can Packing, Brush Dispenser, Liquid, Brown, Unpleasant Odor/Scent, Composition: Copper Naphthenate, Process Oil, Mineral Spirits, 0.92 Specific Gravity, 150 - 250 deg F Flash Point, 25 - 35 % VOC, Applicable Materials: Wood, Lumber and Plywood, NIOSH Approved, Water damage, Wood rot
PRIMER INTR/EXTR WHITE 1GAL   Drylok 27515 Latex Based Masonry Waterproofer Kilz 10041 Interior Primer Sealer
Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Kilz Primer Sealer, Interior, Series: 10041, 1 gal Capacity, Oil Base, Acrylic Resin, Liquid, White, Odorless Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 331 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall Paneling
Zinsser 3951 Interior Stain Blocker Weiman 5134 Stone Spray-N-Seal Penetrating Sealer Wolman Coppercoat Woodlife Wood Preservative
Zinsser Stain Blocker, Interior, Series: 3951, 13 oz Capacity, Oil Base, Synthetic Alkyd Resin, Liquid, White, Solvent Odor/Scent, 350 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Natural or Synthetic Bristle Brush, Roller, or Airless Sprayer, 106 deg F Flash Point, 336 g/l VOC, 12.5 pH, 40 - 90 deg F, For Porous, Cement Protects natural stone surfaces from staining. For stone countertops, floors, walls, vanities and even grout. Also for sealing all types of masonry, stucco, concrete and sanded grout. Has special blend of polymers that bond to the stone and creates a water and oil repellant membrane to prevent staining and allows the stone to breathe and release moisture vapors. Safe for interior and exterior use and is UL Classified for slip resistance. Coverage varies depending on surface. Wolman Wood Preservative, Water Based, Series: Coppercoat, Woodlife, 5 gal Capacity, Container Packing, Brush, Roller, Pump Sprayer Dispenser, Liquid, Green, Faint Amine Odor/Scent, Composition: Monoethanolamine, Copper Naphthenate, 1.04 - 1.07 Specific Gravity, >200 deg F Flash Point, <250 g/l VOC, 10.1 - 10.9 pH, 50 - 90 deg F, Fence Posts, Poles
Homax 613 Wet Look Cure Seal PRIMER ALKALI RESISTANT GAL   California 50600-1 Primer/Sealer
Protects from oil, rust, water and sprinkler stain penetration. Use on exposed aggregate, flagstone, concrete driveway, patio tile, walkway, and garage floor. Low odor and non-flammable. Leaves a clear natural wet look. Ready for traffic 8 to 24 hours. Apply with roller, brush, sponge, mop or airless sprayer. Covers 150 to 400 sq. ft. per gallon depending on porosity. Valspar Primer, 1 gal, Container, Acrylic Resin, Liquid, Slight Odor/Scent, 200 - 400 sq-ft/Gal Coverage, 30 - 60 min Drying Time, Application Method: Airless Spray, Brush, Roller, 205 Deg F Flash Point, < 50 g/l VOC, 6 - 13 pH, 50 - 90 Deg F, Standards: SCAQMD, CARB 2000 SCM, CARB 2007 SCM, OTC/LADCO, US National Regulatory Compliance, Water Thinning, Mildew Resistant FixAll Universal Primer, Series: 50600, 1 Gal, Water Base, 100 % Acrylic Latex Resin, Viscous Liquid, White, Very Slight Odor/Scent, 300 - 350 sq-ft/Gal Smooth Surface, 175 - 225 sq-ft/Gal Porous Surface Coverage, 1/2 hr to Touch, 4 hr to Handle, 2 hr to Recoat Drying Time, Application Method: Synthetic, Nylon or Polyester Brush, Roller, Airless Spray, 100 g/l VOC, 8.5 pH, < 50 Deg F, Suitable For Use With: Wallboard  Plaster, Sheetrock, Masonry, Wood, Concrete, Galvanized Metal, Plastic Laminates, Vinyl Wall Coverings, Under Wall Coverings As Well As Previously Painted Surfaces, Standards: WHMIS Hazard Class
Waterseal TH.042811-16 Semi-Transparent Waterproofing Stain Waterseal TH.042821-16 Semi-Transparent Waterproofing Stain Waterseal TH.042831-16 Semi-Transparent Waterproofing Stain
Waterseal Waterproofing Stain, Semi-Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Harvest Gold, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, Semi-Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Maple Brown, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, Semi-Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Sequoia Red, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood
Waterseal TH.042841-16 Semi-Transparent Waterproofing Stain Waterseal TH.042851-16 Semi-Transparent Waterproofing Stain Green Products 33001 Oil Based Wood Preservative
Waterseal Waterproofing Stain, Semi-Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Acorn Brown, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, Semi-Transparent, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Woodland Cedar, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Green Products Wood Preservative, Oil Based, 1 gal Capacity, Can Packing, Brush Dispenser, Liquid, Brown, Pungent Odor/Scent, Composition: Copper Naphthenate, Process Oil, Mineral Spirits, 0.92 Specific Gravity, 150 - 250 deg F Flash Point, 25 - 35 % VOC, Applicable Materials: Wood, Lumber and Plywood, NIOSH Approved, For Window Frames, Doors
PRIMER KITCHEN/BATH GALLON    PRIMER INTR/EXT ORIG LVOC 1GAL PRIMER INTR/EXT ORIG LVOC 5GAL
For residential surfaces in high humidity, moisture and temperature environments such as kitchens, bathrooms, powder rooms and laundry rooms. Adhers to most surfaces and provides a sound anchor for paints. The enhanced mildew-resistant film helps protect the primer from mildew growth. Will block most stains including felt marker, grease, ink, pencil, tannin and water stains. It is a fast drying, low odor and low VOC formula.
PRIMER EXTERIOR LATEX WHT 1GAL Zinsser 249728 Smart Prime Primer/Sealer Prep-Step 44-981 Exterior Primer
Zinsser Primer Sealer, Series: Smart Prime, 5 gal, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer, For Interior/Exterior Use Prep-Step Primer, Exterior, Series: 44-981, 1 gal Capacity, Pail Packing, Latex Base, Acrylic Resin, Liquid, White, 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 1.27 Specific Gravity, 205 deg F Flash Point, <50 g/l VOC, 50 - 90 deg F, LEED Certified, CARB 2000 SCM, 94 - 102 Krebs Units, For Bare Wood
F&P 14416 Oil Based Wood Preservative F&P 14396 Oil Based Wood Preservative F&P 14406 Oil Based Wood Preservative
F&P Wood Preservative, Oil Based, 1 gal Capacity, Container Packing, Bristle Brush, Paint Pad, Pump Sprayer Dispenser, Liquid, Cedar, Solvent Like Odor/Scent, Composition: Stoddard Solvent, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Xylene, Ethylbenzene, 0.938 Specific Gravity, 105 deg F Flash Point, <280 g/l VOC, 50 - 90 deg F, Fences F&P Wood Preservative, Oil Based, 1 gal Capacity, Container Packing, Bristle Brush, Paint Pad, Pump Sprayer Dispenser, Liquid, Natural, Solvent Like Odor/Scent, Composition: Stoddard Solvent, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Xylene, Ethylbenzene, 0.937 Specific Gravity, 105 deg F Flash Point, <280 g/l VOC, 50 - 90 deg F F&P Wood Preservative, Oil Based, 1 gal Capacity, Container Packing, Bristle Brush, Paint Pad, Pump Sprayer Dispenser, Liquid, Redwood, Solvent Like Odor/Scent, Composition: Stoddard Solvent, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Xylene, Ethylbenzene, 0.941 Specific Gravity, 105 deg F Flash Point, <280 g/l VOC, 50 - 90 deg F
Waterseal TH.043811-16 Waterproofing Stain Waterseal TH.043821-16 Waterproofing Stain Waterseal TH.043831-16 Waterproofing Stain
Waterseal Waterproofing Stain, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Solid Harvest Gold, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Solid Maple Brown, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Solid Sequoia Red, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood
Waterseal TH.043841-16 Waterproofing Stain Waterseal TH.043851-16 Waterproofing Stain Valspar 82390 Wet Look Sealer
Waterseal Waterproofing Stain, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Solid Acorn Brown, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterseal Waterproofing Stain, 1 gal, 0.29 lb/gal VOC, 8.5 pH, Solid Woodland Cedar, 150 - 400 sq-ft Coverage, 1.03 Specific Gravity, Applicable Materials: Wood, Application Method: Brush, Paint Pad, Roller and Sprayer, Resists: UV, Water and Mildew, ASTM D4446, For Decks and Fences, Outdoor Furniture and Exterior Wood Waterproofs and enhances the color and design of concrete, brick, masonry, slate and pavers. Formulated to protect surfaces against the sun's UV rays and damaging weather. Resists gasoline, oil and de-icing salts. For use over semi-transparent stain or bare concrete.
Valspar 82092 Natural Look Waterproofer PRIMER INTERIOR/EXTERIOR 1GAL PRIMER INTR/EXTR WHITE 5GAL
Forms a waterproofing seal on concrete, brick, masonry, aggregate, natural stone and pavers. Formulated to protect against the sun's UV rays, water, gasoline and de-icing salts. Protective sealer allows the natural look of the surface to come through.
Damtite 03555 Masonry Waterproofer F&P 14415 Oil Based Wood Preservative F&P 14395 Oil Based Wood Preservative
High performance masonry waterproofer used for above or below grade applications. Alkali-resistant coating provides excellent waterproofing protection with a decorative finish for all masonry, cinder and concrete block, poured concrete, brick, stucco. Use on basement walls, retaining walls, fountains, birdbaths, planters and more. Fast drying, low odor and tintable to light pastel shades. Easy clean up. Reduces Radon Gas penetration through concrete block walls. Covers up to 150 sq. ft. (11.6 m2) per gallon. F&P Wood Preservative, Oil Based, 5 gal Capacity, Container Packing, Bristle Brush, Paint Pad, Pump Sprayer Dispenser, Liquid, Cedar, Solvent Like Odor/Scent, Composition: Stoddard Solvent, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Xylene, Ethylbenzene, 0.942 Specific Gravity, 105 deg F Flash Point, <280 g/l VOC, 50 - 90 deg F, Fences F&P Wood Preservative, Oil Based, 5 gal Capacity, Container Packing, Bristle Brush, Paint Pad, Pump Sprayer Dispenser, Liquid, Natural, Solvent Like Odor/Scent, Composition: Stoddard Solvent, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Xylene, Ethylbenzene, 0.937 Specific Gravity, 105 deg F Flash Point, <280 g/l VOC, 50 - 90 deg F
F&P 14405 Oil Based Wood Preservative Flood/PPG FLD4-04 E-B Emulsa-Bond Bonding Primer Additive PRIMER ALKALI RESISTANT PAIL
F&P Wood Preservative, Oil Based, 5 gal Capacity, Container Packing, Bristle Brush, Paint Pad, Pump Sprayer Dispenser, Liquid, Redwood, Solvent Like Odor/Scent, Composition: Stoddard Solvent, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Xylene, Ethylbenzene, 0.934 Specific Gravity, 105 deg F Flash Point, <280 g/l VOC, 50 - 90 deg F Penetrol Paint Additive, 1 Gal Capacity, Can, <550 g/l VOC, Liquid, Composition: Solvent Naphtha (Petroleum), Medium Aliph, Linseed Oil, Xylene, Ethylbenzene, Clear/Amber, Mild Solvent Odor/Scent, >125 Deg F Flash Point, Flammability Rating: 2, 0.86 Specific Gravity, Used in Oil or Alkyd-Based Paints, Varnishes and Primers Valspar Primer, 1 Pail, Container, Acrylic Resin, Liquid, Slight Odor/Scent, 200 - 400 sq-ft/Gal Coverage, 30 - 60 min Drying Time, Application Method: Airless Spray, Brush, Roller, 205 Deg F Flash Point, < 50 g/l VOC, 6 - 13 pH, 50 - 90 Deg F, Standards: SCAQMD, CARB 2000 SCM, CARB 2007 SCM, OTC/LADCO, US National Regulatory Compliance, Water Thinning, Mildew Resistant
Green Products COPPER QTS Wood Preservative STAIN/SLR EXT WD REDWD CAN 1G STAIN/SLR EXT WD NAT CDR CN 1G
Green Products Wood Preservative, Solvent Based, 1 qt Capacity, Can Packing, Brush Dispenser, Liquid, Brown, Unpleasant Odor/Scent, Composition: Copper Naphthenate, Process Oil, Mineral Spirits, 0.92 Specific Gravity, 150 - 250 deg F Flash Point, 25 - 35 % VOC, Applicable Materials: Wood, Lumber and Plywood, NIOSH Approved, Water damage, Wood rot
STAIN/SLR EXT WD LT OAK CAN 1G STAIN/SEALER EXT WOOD CLEAR 1G STAIN/SLR EXT WD GLD PN CAN 1G
STAIN/SLR EXT WD MHGONY CAN 1G STAIN/SLR EXT WD DK WLNT CN 1G STAIN/SLR EXT WD PECAN CAN 1G
PRIMER EXTERIOR LATEX WHT 5GAL Masterchem Industries Max Sealer Primer Drylok 28615 Extreme Masonry Waterproofing Paint
Masterchem Industries Sealer Primer, Series: Max, 1 gal, Water Base, Liquid, White, Slight Odor/Scent, 400 sq-ft Coverage, 1 hr Drying Time, Application Method: Brush, Roller and Spray, 75 g/L VOC, 5 - 8 pH, 50 - 90 deg F, SCAQMD, CARB, OTC, LADCO, AIM, Leed Certified, For Interior Applications For the most demanding conditions. For above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco and brick. Formulated to resist mildew growth on the paint film. Stops 15 psi. Passes ASTM D-7088 Resistance to Hydrostatic pressure and ASTM D-6904 resistance to wind driven rain. Covers 75 to 125 sq. ft per gallon depending on surface porosity.
Cabot 1000 Waterproofing Sealer Rustoleum 276088 Primer Cabot 2101 Waterproof Wood Protector
Water-based silicone coating. Designed to provide protection on a multitude of surfaces by coating the pores of the substrates with silicone. For use on wood, brick, concrete and masonry. Penetrates and fills the pores of the substrate with premium grade silicon sealer. Ideal for new or properly reconditioned decks, fences, siding, shingles, shakes and logs. Covers 100-250 sq. ft. per gallon. Rates will vary depending on porosity of the surface. Zinsser Mold Killing Primer, 5 gal, Water Base, Styrene Acrylic Resin, Liquid, White, Mild Odor/Scent, 624 sq-ft/gal Theoretical Coverage, 400 - 450 sq-ft/gal Practical Coverage Coverage, 30 Min To Touch, 1 hr To Handle, 1 hr To Recoat, 7 Days To Cure Completely Drying Time, Application Method: Brush, Roller, Spray, > 200 Deg F Flash Point, 1 g/l VOC, 40 - 80 Deg F, Suitable For Use With: All Existing Mold, Mildew, Moss, Fungi, Odor Causing Bacteria and Any Other Fungal Organisms, Used On Non-Porous Interior and Exterior, Residential, Commercial and Industrial Applications and Can Be Applied In Factories, Warehouses, Storage Facilities, Refrigerated Storage Facilities, Office Buildings, Residential Living, Schools, Hospitals, Veterinary Care Facilities, Elderly Care Facilities, Prisons and Correction Facilities, Wash Houses, Restaurants, Fitness Centers and Locker Rooms, Attics, Basements, Window Frames, Bathrooms, Wall Cavities, Base-Boards, Sub-Floors and Table Tops Cabot Wood Protector, Waterproof, Series: 2101, 1 gal Capacity, Container Packing, Polyester Brushes, Stain Pads, Garden Sprayer Dispenser, Liquid, Clear, 205 deg F Flash Point, <100 g/l VOC, 50 - 90 deg F, Applicable Materials: Wood, Stone, Masonry, Brick and Concrete, OSHA 29 CFR 1910.1200, 100 -200 sq-ft/gal Coverage Area, For Wood Decks
Green Products COPPER SPRAY Wood Preservative Valspar 82020 Solid Color Concrete Stain Valspar 82020 Solid Color Concrete Stain
Green Products Wood Preservative, 14 oz Capacity, Aerosol Can Packing, Sprayer Dispenser, Liquid, Brown, Unpleasant Odor/Scent, Composition: Copper Naphthenate, Process Oil, Mineral Spirits, 0.92 Specific Gravity, 150 - 250 deg F Flash Point, 25 - 35 % VOC, Applicable Materials: Wood, Lumber and Plywood, NIOSH Approved, Water damage, Wood rot Protects from sun, water and household-chemical damage. Renews patios, driveways, pool decks and other exterior masonry surfaces. Makes old concrete look new. Covers approximately 200-500 sq ft per gallon depending on surface porosity. Protects from sun, water and household-chemical damage. Renews patios, driveways, pool decks and other exterior masonry surfaces. Makes old concrete look new. Covers approximately 200-500 sq ft per gallon depending on surface porosity.
Valspar 82024 Concrete Sealer Valspar 82085 Masonry Waterproofer Valspar 82390 Wet Look Sealer
Protects from sun, water and household-chemical damage. Renews patios, driveways, pool decks and other exterior masonry surfaces. Makes old concrete look new. Covers approximately 200-500 sq ft per gallon depending on surface porosity. Fortified with new, heavy-duty resin technology to provide maximum adhesion while protecting concrete and masonry surfaces with a watertight barrier to stop water. Low odor formula for use in basements. Use on properly prepared masonry walls and foundations, basements, cinder block, brick and poured concrete. Stops 15 PSI of water pressure. Mold and mildew resistant. Waterproofs and enhances the color and design of concrete, brick, masonry, slate and pavers. Formulated to protect surfaces against the sun's UV rays and damaging weather. Resists gasoline, oil and de-icing salts. For use over semi-transparent stain or bare concrete.
Valspar 82092 Natural Look Waterproofer STAIN/SLR EXT WD LIGHT OAK 5G STAIN/SLR EXT WD GOLDN PINE 5G
Forms a waterproofing seal on concrete, brick, masonry, aggregate, natural stone and pavers. Formulated to protect against the sun's UV rays, water, gasoline and de-icing salts. Protective sealer allows the natural look of the surface to come through.
STAIN/SLR EXT WD NAT CEDAR 5G STAIN/SLR EXT WD PECAN PAIL 5G STAIN/SLR EXT WD REDWD PAIL 5G
STAIN/SLR EXT WD DK WLNT PL 5G STAIN/SLR EXT WD MGONY PAIL 5G STAIN/SEALER EXT WOOD CLEAR 5G
California 20701-1 Stain Killer Primer Cabot Problem-Solver Exterior Primer Cabot Problem-Solver Exterior Extra Quick Primer Sealer
FixAll Stain Killer Primer, Series: 20701-1, 1 gal Capacity, Oil/Latex Base, Alkyd Resin, Viscous Liquid, Slight Ammonia Odor/Scent, ANSI Z400.1-2004 Certified Cabot Primer, Exterior, Series: Problem-Solver, 1 gal Capacity, Water, Solvent Base, Acrylic Resin, Liquid, White, 150 - 250 sq-ft (Rough Surface), 250 - 350 sq-ft (Smooth Surface) Coverage, 30 min Drying Time, Application Method: Stiff Bristle Brush and Spray, 1.32 Specific Gravity, 205 deg F Flash Point, 100 g/l VOC, 50 deg F, For Wood Siding Cabot Primer Sealer, Exterior Extra Quick, Series: Problem-Solver, 1 gal Capacity, Water, Solvent Base, Alkyd Resin, Liquid, White, Flat, 150 - 250 sq-ft (Rough Surface), 400 - 500 sq-ft (Smooth Surface) Coverage, 4 hr Drying Time, Application Method: Stiff Bristle Brush and Spray, 1.43 Specific Gravity, 105 deg F Flash Point, 200 g/l VOC, 45 deg F
Deft 015-01 Lacquer Sanding Sealer PRIMER SEALER STAIN OIL 5-GAL PRIMER ADHESION BONDING GAL
Formulated to precede the application of Clear Wood Finish Brushing Lacquer. The sanding sealer serves as the base coat and is designed to seal and protect the surface. Ideal for stained or bare wood surfaces, including furniture, floors, cabinets, doors and trim. Seals the wood pores which allows the top coat go further. Zinsser Primer/Sealer Stain Oil, Series: Cover Stain, Classic, 5 Gal, Container, Oil Base, Low-VOC Modified Alkyd Resin, Liquid, White, Solvent Like Odor/Scent, 1062 sq-ft/Gal Coverage, 2 hr Drying Time, Application Method: Surface Preparation, Priming, Mixing, Stain Blocking, Sealing, >93 Deg C Flash Point, 99 g/l VOC, 40 - 90 Deg F, Suitable For Use With: Any Topcoat Formulated to bond to a variety of 'tough-to-paint' surfaces. Its advanced chemistry provides a sound anchor for topcoats while reducing or potentially eliminating the need for sanding dense, glossy surfaces. This product may be used under epoxies, lacquers and products containing Xylene or other hot solvents, provided it's allowed to dry for 24 hours before topcoating and tested for compatibility in an inconspicuous area before full coat application. Use where ensuring a secure bond is critical in situations when performance of a traditional water or oil-base primer may be questionable.
Zinsser 00901 B-I-N Primer/Sealer Zinsser 00900 B-I-N Primer/Sealer California 50500-1 Primer/Sealer
Zinsser Primer Sealer, Series: B-I-N, 1 Gal, Shellac Resin, Liquid, White, Solvent Like Odor/Scent, 565 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 500 sq-ft/Gal Practical Coverage At Recommended DFT Coverage, 20 min to Touch, 45 min to Recoat, 1-3 Days to Full Cure Drying Time, Application Method: Brush, Roller, Spray, 54 Deg F Flash Point, 540 g/l VOC, 0 - 90 Deg F, Suitable For Use With: Water, Grease, Rust, Smoke, Asphalt, Graffiti and Many Other Types Of Stain, For Interior Applications Zinsser Primer Sealer, Series: B-I-N, 5 Gal, Shellac Resin, Liquid, White, Mild Odor/Scent, 565 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 500 sq-ft/Gal Practical Coverage At Recommended DFT Coverage, 20 min to Touch, 45 min to Recoat, 1-3 Days to Full Cure Drying Time, Application Method: Brush, Roller, Spray, 54 Deg F Flash Point, 540 g/l VOC, 0 - 90 Deg F, Suitable For Use With: Water, Grease, Rust, Smoke, Asphalt, Graffiti and Many Other Types Of Stain, For Interior Applications FixAll Bonding Primer, Series: Grip-Coat 50500, 1 Gal, Water Base, Urethane-Modified Acrylic Resin, Viscous Liquid, White, Slight Ammoniacal Odor/Scent, 400 - 450 sq-ft/Gal Smooth Surface, 200 - 275 sq-ft/Gal Porous Surface Coverage, 1 hr to Touch, 6 hr to Handle, 4 hr to Recoat Drying Time, Application Method: Synthetic, Nylon or Polyester Brush, Roller, Airless Spray, 100 g/l VOC, < 50 Deg F, Suitable For Use With: PVC, Glass, Fiberglass, Glossy Paints, Tile Or Glazed Block, Galvanized Metal, Aluminum, Copper, Lead and Tin
   
 
1