Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > AUTOMOTIVE ELECTRICAL
Choose a sub category:
HEADLIGHTS REPLACEMENT BULBS AUTOMOTIVE FUSES & KITS
LAMP ASSEMBLYS AUTO PRIMARY WIRE AUTO ELECTRICAL ACCESSORIES
AUTO ELECTRICAL SWITCHES CIGARETTE LIGHTER ACCESSORIES
Sort By:
1
Bussmann BP/SFE-AH6-RP High Amperage Assortment Automotive Fuse Kit Bussmann ATC-3-RP Automotive Non-Time Delay Fast Acting Fuse Bussmann ATC-15-RP Automotive Non-Time Delay Fast Acting Fuse
Glass tube. Plated brass end caps. Includes 2 each: SFE-14, SFE-20 and SFE-30 fuses. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized.
Bussmann ATC-30-RP Automotive Non-Time Delay Fast Acting Fuse Bussmann ATC-5-RP Automotive Non-Time Delay Fast Acting Fuse Bussmann ATC-25-RP Automotive Non-Time Delay Fast Acting Fuse
Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized.
Bussmann ATC-10-RP Automotive Non-Time Delay Fast Acting Fuse Bussmann ATC-20-RP Automotive Non-Time Delay Fast Acting Fuse Bussmann ATC-40-RP Automotive Non-Time Delay Fast Acting Fuse
Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized.
Bussmann BP/ATC-A5-RP High Amperage Assortment Automotive Fuse Kit Bussmann HHD-RP Automotive Fuse Holder Victor V309 Lens Repair Tape
Assorted, one each blade fuses. In-Line black fuse holder for ATC blade-type fuses from 3 to 30 Amp, number 12 yellow lead wire. Maximum continuous current rating of 24 Amps or 80% of the fuse rating, whichever is less. Use on parking light, directional light and side marker light. 1-7/8" x 5', on a card.
Bussmann AGC-30-RP Automotive Fast Acting Fuse Bussmann AGC-20-RP Automotive Fast Acting Fuse Bussmann AGC-15-RP Automotive Fast Acting Fuse
Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC. Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC. Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC.
Bussmann AGC-3-RP Automotive Fast Acting Fuse Bussmann AGC-25-RP Automotive Fast Acting Fuse Calterm 70303 Insulated Alligator Clip
Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC. Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC. For home and auto applications.
Bussmann AGC-10-RP Automotive Fast Acting Fuse FUSE AGC 1-1/2 AMP            Victor V308 Lens Repair Tape
Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC. Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC. Use on parking light, directional light and side marker light. 1-7/8" x 5', on a card.
Calterm 40110 Automotive Toggle Switch Calterm 41700 Toggle Switch Bussmann Maxi MAX-30-RP Automotive Blade Fast Acting Fuse
Basic black switch for special applications. Mount in 1/2" round hole or modular panel No.40610 (SKU 105-6753). Die-cast construction with ON/OFF face plate. Set screw terminals. 15 Amp at 12-Volts DC, 6 Amp at 125-Volts AC, and 3 Amp at 250-Volts AC. Mounts in 1/2" hole. Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant.
Mini-Pak 61370 Piggyback Adapter Bussmann Maxi MAX-40-RP Automotive Blade Fast Acting Fuse Bussmann HHK-RP Automotive Fuse Holder
Piggyback adapter, .250. Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. Universal nylon twist-lock fuse holder, for AGC, AGA, AGW, AGX and SFE fuses. 20 Amp, #14 lead wire.
Bussmann ATM-20-RP Automotive Mini Non-Indicating Fast Acting Fuse Calterm 08100 Automotive Fuse Holder Bussmann ATM-25-RP Automotive Mini Non-Indicating Fast Acting Fuse
Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. UL recognized (3-30A) Guide JFHR2, File E56412. With wire gauge matched to circuit amperage. 10 Amps, 18 AWG, fuse not included. Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. UL recognized (3-30A) Guide JFHR2, File E56412.
Bussmann ATM-15-RP Automotive Mini Non-Indicating Fast Acting Fuse Bussmann ATM-5-RP Automotive Mini Non-Indicating Fast Acting Fuse Calterm 08120 Fuse Kit
Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. UL recognized (3-30A) Guide JFHR2, File E56412. Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. UL recognized (3-30A) Guide JFHR2, File E56412. Wire gauge matched to circuit amperage. Twist and lock style holder includes fuse. 20 Amps, 12 AWG, fuse included.
Calterm 40120 Automotive Toggle Switch Calterm 40090 Automotive Duckbill Switch Bussmann ATM-10-RP Automotive Mini Non-Indicating Fast Acting Fuse
Basic black switch for special applications. Mount in 1/2" round hole or modular panel No.40610 (SKU 105-6753). Wider, short chrome handle for ease of use and limited space installations. Mounts in 1/2'' hole or modular panel No.40610 (SKU 105-6753). Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. UL recognized (3-30A) Guide JFHR2, File E56412.
Bussmann ATM-30-RP Automotive Mini Non-Indicating Fast Acting Fuse FUSE LOW AMP ATC-1/-2/-3/-4   Bussmann Mini Automotive Fuse Holder
Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. UL recognized (3-30A) Guide JFHR2, File E56412. ATC low amp fuse assortment: 1, 2, 3, 4, 5 (2) and 7-1/2 (2) amps. In-Line fuse holder for MINI fuses. 32 Volt DC maximum voltage rating. Body material withstands high temps. Protective cover has removable straps.
Calterm 40240 Automotive Toggle Switch Calterm 40340 Automotive Glow Rocker Switch Peterson V440-15 Square Replacement Lens
Handle glows when circuit is on. Fits 1/2" hole or modular panel No.40610 (SKU 105-6753). 0.250" copper terminals. Rocker glows when circuit is on. Mounts flush in 1-1/8" x 7/16" rectangular hole or modular panel No.40650 (SKU 477-8916). Tough molded acrylic lens. Used to replace lenses of Peterson Nos.440, 441, 444, and 452 series lights. 4-1/2" square.
Victor V-5410 Well Lighter TAPE REDLENS REPAIR 1.875X60IN Peterson V107WR Mini Clearance/Side Marker Light
Replaces most 12 volt wells. Designed for the temporary repairs of broken or cracked taillights, parking lights and side directional lights. Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4"W x 1" x 1-1/8"D, mounts on 2-3/4" centers.
Peterson V107WA Mini Clearance/Side Marker Light FUSE AGC 1/2 AMP              Bussmann BP/AGC-AH10-RP High Amperage Assortment Automotive Fuse Kit
Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4"W x 1" x 1-1/8"D, mounts on 2-3/4" centers. Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC. Glass tube. Plated brass end caps. Includes: (1) AGC-7-1/2, (2) AGC-10, (2) AGC-15, (2) AGC-20, (1) AGC-25 and (2) AGC-30 amp fuses.
Calterm 08231 Weather Resistant Fuse Kit FUSE AGC LOW AMP              Peterson V108 Clearance/Side Marker Light
With rubber seal and mounting tab. 30 amp, 10 AWG. Fuse not included. AGC low amp fuse assortment: 1 (2), 2 (2), 3 (2), 4, 5 (2) and 6 amp. Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers.
Bussmann KM Fast Acting Mini-Blade Fuse Kit Calterm 08220 Fuse Kit Bussmann BP/ATC-AH8-RPP High Amperage Emergency Automotive Fuse Kit
ATM-2, 5, 7-1/2, 10, 15, 20, 25, and 30. For blade type fuses. 20 Amp, 12 AWG, with wire gauge matched to circuit amperage. Fuse included. Eight fuses and one puller.
Peterson V108 Clearance/Side Marker Light Calterm 45100 Automotive Toggle Switch FUSE ATC-10ID EASY ID
Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers. Brass plated case, nickel plated switch, resists corrosion. Brass set screw terminals. Blown fuse indication. Fuse illuminates when blown. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. UL Recognized.
FUSE ATC-15ID EASY ID         FUSE ATC-20ID EASY ID         FUSE ATC-30ID EASY ID
Blown fuse indication. Fuse illuminates when blown. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. UL Recognized. Blown fuse indication. Fuse illuminates when blown. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. UL Recognized. Blown fuse indication. Fuse illuminates when blown. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. UL Recognized.
FUSE LOW PROFILE ATM ASSORTMNT FUSE ATM ASSORT 2/3/4/5/7-1/2 Calterm 41720 Automotive Toggle Switch with Leads
Fuse assortment: 7-1/2, 10, 15, 20, 25 and 30A. ATM low amp assortment: 2, 3 (2), 4, 5 (2) and 7-1/2 (2)A. Metal nickel-finished toggle with two 6'', 16 AWG wire leads. Used for shop equipment. Mounts in 1/2'' hole or modular panel No.40610 (SKU 105-6753). 10 amp at 12 volts DC, 8 amp at 125 volts AC, and 4 amp at 250 volts AC. UL Listed.
Calterm 42200 Push Button Switch Peterson V438 Utility License Plate Light Calterm 8452 Junction Block
Switch is on when pulled out. Mounts in 1/2'' hole. Chrome case and pull with nickel-plated set screw terminals. For courtesy, interior or instrument lights; commonly used to illuminate license plate or step bumpers. Chrome plated steel housing snaps into 1-1/4" diameter holes. 1-1/2" diameter overall. 2 required for legal license illumination. For RV, audio and motorsport. Allows for additional wiring circuits to be safely connected to vehicle's electrical system. Ring, hook or spade type terminals fit. Four terminal junctions.
Bussmann FMX-30-RP Automotive Non-Indicating Time Delay Fuse Bussmann FMX-20-RP Automotive Non-Indicating Time Delay Fuse Bussmann FMX-40-RP Automotive Non-Indicating Time Delay Fuse
Color coded, 5.5 mm blade centers with a 6.0 mm width and .81 mm thick blades. Color coded, 5.5 mm blade centers with a 6.0 mm width and .81 mm thick blades. Color coded, 5.5 mm blade centers with a 6.0 mm width and .81 mm thick blades.
Calterm 41710 Toggle Switch Calterm 42210 Push Button Switch Victor 22-1-39047-8 Accessory Plug
Brass set screw terminals. Mounts in 1/2" hole or modular panel No.40610 (SKU 105-6753). 15 Amp at 12-Volt DC, 6 Amp at 125-Volt AC, 3 Amp at 250-Volt AC. UL Listed. Chrome and nickel-plated set screw terminals. Carded. Replace the plug and extend the cord on broken 12 volt products. 8-foot charger cord. Replaceable 5 amp fuse. Operates on less than 5 amps.
Peterson V138A Double Bull Eye Clearance/Side Marker Light Tech Line Antivibe 65507 Double Crimp Butt Splice Road Power 10-1-17 Primary Electrical Wire
Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light, and may be used as combination clearance and side marker when properly mounted on 3" centers and grounded through mounting hardware; single wire for electrical connection. 15,000-hour long life bulbs. 4" width x 2" height x 1-1/8" depth. For easy crimp splicing. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
Road Power 10-1-14 Electrical Wire Road Power 10-1-16 Primary Electrical Wire Road Power 10-1-11 Primary Electrical Wire
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
Road Power 12-1-12 Electrical Wire Road Power 12-1-17 Primary Electrical Wire Road Power 12-1-15 Primary Electrical Wire
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
Road Power 12-1-14 Primary Electrical Wire Road Power 12-1-16 Primary Electrical Wire Road Power 12-1-11 Primary Electrical Wire
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
Road Power 14-1-12 Primary Electrical Wire Coleman 14-1-17 Electrical Wire Road Power 14-1-15 Primary Electrical Wire
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
Road Power 14-1-14 Primary Electrical Wire Road Power 14-1-16 Primary Electrical Wire Road Power 14-1-11 Double Ended Quartz Tungsten Electrical Wire
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
Road Power 16-1-12 Primary Electrical Wire Road Power 16-1-17 Primary Electrical Wire Road Power 16-1-15 Primary Electrical Wire
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
Road Power 16-1-14 Primary Electrical Wire Road Power 16-1-16 Primary Electrical Wire Road Power 16-1-11 Primary Electrical Wire
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
Road Power 18-1-17 Primary Electrical Wire Road Power 18-1-15 Primary Electrical Wire Road Power 18-1-14 Primary Electrical Wire
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
Road Power 18-1-16 Primary Electrical Wire Peterson V135R Oblong Clearance/Side Marker Light Peterson V138R Double Bull Eye Clearance/Side Marker Light
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant. Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000-hour long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers. Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light, and may be used as combination clearance and side marker when properly mounted on 3" centers and grounded through mounting hardware; single wire for electrical connection. 15,000-hour long life bulbs. 4" width x 2" height x 1-1/8" depth.
Tech Line Antivibe 65501 Double Crimp Butt Splice Tech Line Antivibe 65554 Fully Insulated Female Coupler Road Power 18-1-11 Primary Electrical Wire
For easy crimp splicing. UL Listed. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
Peterson V135A Oblong Clearance/Side Marker Light Tech Line Antivibe 65521 Double Crimp Butt Splice FUSE ATM-15ID EASY ID
Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000-hour long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers. For easy crimp splicing. Illuminating blade fuses and holders use LED technology if a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards. Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating.  UL recognized.
FUSE ATM-20ID EASY ID         FUSE ATM-10ID EASY ID         FUSE ATM-30ID EASY ID
Illuminating blade fuses and holders use LED technology if a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards. Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating.  UL recognized. Illuminating blade fuses and holders use LED technology if a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards. Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating.  UL recognized. Illuminating blade fuses and holders use LED technology if a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards. Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating.  UL recognized.
Shrink Seal 65752 Fully Insulated Female Coupler Shrink Seal 65707 Butt Splice Shrink Seal 65754 Fully Insulated Female Coupler
UL Listed. Heat seal and waterproof. UL Listed.
Shrink Seal 65701 Butt Splice Shrink Seal 65723 Ring Terminal Shrink Seal 65753 Male Coupler
Heat seal and waterproof. Heat to shrink and seal. Blister shrink .250 tab.
Shrink Seal 65711 Ring Terminal Shrink Seal 65721 Butt Splice Shrink Seal 65726 Ring Terminal
Heat to shrink and seal. Heat seal and waterproof. Heat to shrink and seal.
Shrink Seal 65710 Ring Terminal Peterson V114 Stud Mount Clearance/Side Marker Light Peterson V434 Mini Utility Surface Mount Courtesy Light
Heat to shrink and seal. Stud mount side marker or clearance light with built-in reflector optics to eliminate the need for a separate reflector. Push stripped power wire into "Quick Lock" port to connect. Single wire for electrical connection. Features 15,000-hour long life bulb. 2-3/4"W x 2-1/8"H x 1"D. Mounts with two stainless steel screws on 2" centers and has separate ground wire for non-metallic surfaces. Polished, chrome-plated brass housing with hooded shield to prevent upward glare. 2-9/16" width x 1-3/16" height x 1" depth.
Calterm 41770 Automotive Toggle Switch FUSE ATR ASSORTMENT 50-30A 1EA Calterm 45110 Push Button Switch
Die-cast body, extra-long chrome handle. Includes ON/OFF face plate and copper set screw terminals. Mounts in 1/2" hole or modular panel No.40610 (SKU 105.6753). ATR 2-leg micro fuse emergency kit: 5, 7-1/2, 10, 15, 20, 25 and 30A, with fuse puller. Black rubber boot button, brass-plated case and brass set screw terminals resist corrosion for marine and RV starter circuit.
Peterson V435 Surface Mount License Plate Light Bussmann BP/ATC-AID Assortment Fuse Kit FUSE FAST ACT GOLD PLT 60AMP
Chrome-plated steel housing and mounting bracket in traditional styling for numerous applications. 1-7/8" projection; 2-3/4"W x 2"H bracket mounts on 2" centers. Contains one each of 10, 15, 20, 25 and 30 amp easy ID illuminating ATC fuses. Fast-acting glass tube fuse. With gold-plated end caps for high-end stereo and AV markets. 13/32" x 11/2".
Piranha V168R LED Slim Line Clearance/Side Marker Light Calterm 41730 Automotive Toggle Switch Calterm 41800 Automotive Toggle Switch
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volt. Hard-wired with separate lead and ground wires for mounting to all surfaces. 2-3/4"W x 5/8"H x 3/4"D, mounts on 1-15/16" centers. 100,000-hour rated life. Made in USA. Used for shop equipment. Brass set screw terminals. 15 Amp at 12 volt DC, 20 amp at 125 volt AC, 10 amp at 250 volt AC, and 3/4HP 120 at 250 volts AC. UL Listed. Dip sealed in special rubberized coating compound to seal against dust and moisture. Toggle boot included. Mounts in 1/2" hole or modular panel No.40610 (SKU 105-6753). UL Listed.
Peterson V428S Stud Mount Combination Tail Light Peterson V169KR LED Clearance/Side Marker Light Kit Peterson V169KA LED Clearance/Side Marker Light Kit
Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10" lead wires. Universal stud mount with 1/4" studs on 2" centers. 3-3/4"H x 2-5/8"D overall. Sealed 2-diode LED light alternative to traditional incandescent 154-series lights. Operates from 9-16 volt. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3" centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16"L x 1-1/16"W x 15/16"D. Sealed 2-diode LED light alternative to traditional incandescent 154-series lights. Operates from 9-16 volt. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3" centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16"L x 1-1/16"W x 15/16"D.
Bussmann BP/ATM-AID Assortment Fuse Kit Calterm 41840 Push Button Switch Bussmann DIA-1 Emergency ATC Diagnostic Kit
Contains one each of 10, 15, 20, 25 and 30 amp easy ID illuminating ATM fuses. Die-cast construction with black rubber boot seal and brass set screw terminals. For starters on industrial and motorsport vehicles. Mounts in 5/8" hole. Diagnostic Kit contains 5, 10, 15, 20, 25 and 30 amp ATC fuses and an FT-3 fuse tester/puller.
Peterson V170 LED Clearance/Side Marker Light Peterson V313 Double Face Pedestal Mount Combination Tail Light Peterson V413 Double Wire Flush Mount Combination Tail Light
Functions as clearance or side marker light. 2-wire, hard-wired design. Operates from 9-16 volts. Ground wire includes number 10 ring terminal. Mount using center stud or two mounting screws. 3-1/8" width x 2" height x 15/16". Durable black ABS housing with snap on lens functions as a stop, turn, and tail light. Interchangeable with similar competitive units. 2 lead wires exit through 1-9/16"H x 1/2" diameter hollow stud. 4-1/8" diameter, 2-3/8"D overall. Sturdy plastic housing with a black finish. Brass socket and Lexide lens gasket for long life. 5-1/2" face diameter, 4-1/2" diameter inset, and 1-1/2"D overall.
Peterson V428W Stud Mount Combination Tail Light Peterson V440 Combination Tail Light Peterson V313 Single Face Pedestal Mount Signal Light
Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10" lead wires. Universal stud mount with 1/4" studs on 2" centers. 3-3/4"H x 2-5/8"D overall. Under-80" wide combination tail light. Includes the following functions: stop, turn, tail, rear reflex, side marker, and side reflex. Includes lead wire. Grounds through 1/4" mounting studs.  5"W x 4-1/2"H x 2-7/8"D overall, studs on 2" centers. Light functions as combination turn signal, parking light, or warning light. Durable, black ABS housing with two snap-on amber lenses. Two lead wires exit through 1/2" diameter hollow mounting stud. Grounds through mounting stud. Converts to single-face amber light by snapping on black back. 4-1/8" diameter x 2-3/8'' wide. Mounting stud is 1-9/16" long.
Calterm 41790 Automotive Push/Pull Toggle Switch Piranha V168XA LED Slim Line Clearance/Side Marker Light Kit Piranha V168XR LED Slim Line Clearance/Side Marker Light Kit
Die-cast construction with copper set screw terminals for industrial, farm and motorsport vehicles. 75 amp at 6 to 28-volts DC. Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volt. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" centers. 100,000-hour rated life. 4" width x 1-1/3" height x 15/16" depth. Made in USA. Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volt. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" centers. 100,000-hour rated life. 4" width x 1-1/3" height x 15/16" depth. Made in USA.
Peterson V391 Dome Interior Light Peterson V440L Combination Tail Light Peterson V306 Surface Mount Combination Tail Light
Features durable Lexan lens and nylon push-button on/off switch for long life. Separate ground wire supplied for mounting on non-metallic surfaces. 4-9/16"W x 1-3/4"H x 1-3/4"D, mounts on 3-1/2" x 1-1/2" centers. Under-80" wide combination tail light. Includes the following functions: stop, turn, tail, rear reflex, side marker, and side reflex. Includes lead wire. Grounds through 1/4" mounting studs.  5"W x 4-1/2"H x 2-7/8"D overall, studs on 2" centers. Features polycarbonate lens, galvanized steel base plate, dual-filament bulb, and tough plastic guard to protect lead wires. 4-9/16"W x 2-1/2"H x 1-3/4"D, mounts on 3-1/2" x 1-1/2" centers.
LIGHT MARKER LED 6 DIODE AMBER LIGHT MARKER LED 6 DIODE RED  LIGHT LICENSE PLATE AUTO LED
For light and medium duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3" centers. Includes both lead and ground wire for mounting to all surfaces. For light and medium duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3" centers. Includes both lead and ground wire for mounting to all surfaces. Durable, low-draw LED design. Requires two lights to meet DOT license light requirements when mounted to side of license plate. Also suitable for utility courtesy light applications. Hardwired leads.
Peterson V107 Mini  Identification Light Bar Peterson V426 Sealed Combination Tail Light Kit Eiko 194-2BP Miniature Auto
Corrosion resistant, zinc plated, painted with white baked enamel. Three 3-1/4" x 1" x 1-1/8" No.107 compact lights attached to each bar. Lights have acrylic lenses that lock into base to protect against being knocked out. Mounts on 16-1/2" centers and grounds through mounting hardware. 16-1/8"W x 1"H x 1-3/8"D, 16-1/2"L with mounting brackets. Sealed, 4" round stop, turn, and tail light may be used on both curbside and roadside of vehicle or trailer. Fully automated manufacturing process ensures consistent quality and reliability. Features extra wide, spin-welded, tongue-and-groove lens lip and waterproof seal. High performance, copper alloy conductors eliminate the possibility of wire failure. State-of-the art bulb design features three supports for the minor filament and two supports for the major filament providing long bulb life. Wedge-base socket prevents premature bulb failure. Includes light, grommet and 431-491 straight plug. 4-1/4" Diameter. Clear or painted glass T-3 1/4 bulb with C-2F filament.
Peterson V153KR LED Clearance/Side Marker Light Kit Peterson V153KA LED Clearance/Side Marker Light Kit Calterm 5149 Terminal Connector Kit
Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug. 2-1/2" width x 1-1/4" height x 7/8" depth. Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug. 2-1/2" width x 1-1/4" height x 7/8" depth. Complete assortment for most garage and shop wiring projects. Includes terminals, connectors, grommets, and clamps. 22-10 AWG size. UL Listed.
Eiko 161-BP Auto Indicator Bulb Bussmann DIA-2 Emergency ATM Diagnostic Kit LIGHT MARKER LED 2-1/2 RND AMB
Clear or painted glass T-3 1/4 bulb with C-2F filament. Kit contains ATM-2, 5, 7, 10, 15, 20, 25, 30 blade-type automotive fuses and FT-3 combination fuse tester/puller. Sealed LED light functions as clearance, side marker or identification light. Accepts industry standard 2-prong plug. 9-16 volt operating range. Available for grommet mount, flush-mount or surface-mount flange sonic welded to form a single unit. Includes LED light, mounting grommet and 162-49 plug.
LIGHT MARKER LED 2-1/2 RND RED LIGHT MARKER LED 2IN RND AMB  Peterson V421 Oblong Sealed Combination Tail Light Kit
Sealed LED light functions as clearance, side marker or identification light. Accepts industry standard 2-prong plug. 9-16 volt operating range. Available for grommet mount, flush-mount or surface-mount flange sonic welded to form a single unit. Includes LED light, mounting grommet and 162-49 plug. Sealed LED light functions as clearance, side marker or identification light. Accepts industry standard 2-prong plug. 9-16 volt operating range. Available for grommet mount, flush-mount or surface-mount flange sonic welded to form a single unit. Includes LED light, mounting grommet and 162-49 plug. Lexan housing and lens sonic welded for a permanent seal. Legal in either vertical or horizontal mounting position for U.S. and ECE applications. Includes No.421R light, No.421-18 grommet, and No.421-491 right angle, 3-wire plug with an added terminal for double filament bulbs. Interchangeable with all competitive units. 6-1/2"W x 2-1/4"H.
Eiko 194A-BP Auto Indicator Bulb Eiko 168-BP Auto Indicator Bulb Eiko 1895-2BP Automotive Bulb
Clear or painted glass T-3 1/4 bulb with C-2F filament. Clear or painted glass T-3 1/4 bulb with C-2F filament. C-2F filament, G-4-1/2 bulb - BA-9S base. 2,000 average life hours.
Peterson V452 Submersible Combination Tail Light Eiko 57-2BP Automotive Bulb Peterson V452L Submersible Combination Tail Light
Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker and side reflex. Features gaskets on both rear and side lenses. Grounds through mounting studs. Mounts on 2" centers and includes mounting hardware. Light is  5-3/4"W x 4-1/2"H x 2-7/8"D. C-2V filament, G-4 1/2 bulb - BA-9S base. 500 average life hours. Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker and side reflex. Features gaskets on both rear and side lenses. Grounds through mounting studs. Mounts on 2" centers and includes mounting hardware. Light is  5-3/4"W x 4-1/2"H x 2-7/8"D.
Calterm 41860 Automotive Battery Cut-Off Switch Eiko 921-BP Automotive Bulb Bussmann NO.44 Automotive Fuse Kit
Isolates battery circuit to prevent theft or battery drain for use in vehicles, RVs, marine and farm equipment storage. 2 red removable keys included. Bolt-on terminals for added security. Dome/map high-mount stop light, C-2R filament, T-5 bulb and 1,000 average life hours. Contains 42 blade type fuses, 7 each ATC-5, 10, 15, 20, 25 and 30. Fuses are loose-packed for easy access in reclosable heavy-duty clamshell package. FT-3 combination fuse tester/fuse puller included.
Eiko 912-BP Automotive Bulb Eiko 89-2BP Automotive Bulb Eiko 2057-2BP Miniature Auto
Dome/map high-mount stop light, C-2R filament, T-5 bulb and 1,000 average life hours. C-6 filament, G-6 bulb - BA15s base. 750 average life hours. S-8 bulb, C-6/C-6 filament.
Eiko 1157-2BP Miniature Auto Eiko 1156-2BP Miniature Auto Eiko 67-2BP Automotive Bulb
S-8 bulb, C-6/C-6 filament. Clear or painted amber glass S-8 bulb with C-6/C-6 filament for auto back-up light or turn signal; auto/truck back-up, turn signal or high-mount stop. C-6 filament, G-6 bulb - BA15s base. 5,000 average life hours.
Eiko 211-2/F-BP Automotive Bulb Southwire 55668223 Automotive Primary Wire Eiko 90-BP Automotive Bulb
Festoon 10mm bulb, SV8.5mm base, C-8 filament. Southwire Primary Wire, Automotive, 16 AWG Conductor, Bare Copper Conductor, 100 ft Length, 19/29 Strands, 0.105 in Outside Diameter, 60 V, PVC Insulation, Blue Jacket, SAE J-1128, Premium-Grade Abrasion, Chemical and Moisture Resist, boats, trucks, buses, tractors and trailers C-6 filament, G-6 bulb. 750 average life hours.
Eiko 1003-2BP Automotive Bulb Eiko 1141-2BP Automotive Bulb Eiko 1004-2BP Automotive Bulb
C-6 filament, B-6 bulb. 200 average life hours. Clear or painted amber glass S-8 bulb with C-6/C-6 filament for auto back-up light or turn signal; auto/truck back-up, turn signal or high-mount stop. C-6 filament, B-6 bulb - BA15d base. 200 average life hours.
Bussmann AGC-EK Automotive Fuse Kit Bussmann NO.53 Automotive Fuse Kit Eiko 1154-2BP Incandescent Lamp
AGC-EK glass fuse kit contains ten each of AGC-EK-5, 10, 15, 20, 25 and 30. Also included: FT-3 fuse tester/puller on a card. ATC and Max fuses are for vehicles built in the early 1990s, are loose-packed for easy access in reclosable heavy-duty clamshell package. Also includes FT-3 combination fuse tester and puller. S-8 bulb, C-6/C-6 filament.
LIGHT STOP 6-1/2 OVAL LED     Peterson V502 Utility Halogen Low Profile Tractor Light Peterson V445 Stud Mount Combination Tail Light
Red grommet mount kit. 9-16 volt operating range. Skirted weld joint for added protection against moisture. Does not require top positioning to meet FMVSS 108 standards. Compatible with 431-491 connecting plug. 2.25" tall x 6.5" wide x 1.42" thick. Proudly made in the USA. Low-profile lamp functions as tractor or utility light with bright 55-watt, H3 replaceable bulb. Features high-impact polycarbonate housing and adjustable stainless steel mounting hardware. Light is 5-5/8" W x 2-7/8" H x 2-1/2" D. Overall height of  3-7/8". Features three 1/4" mounting studs on 2" triangular pattern. Includes stop, turn, tail, back-up and license light functions. Will fit Peterbilt, Mack, White and Jeep. 6-1/4"W x 6-3/4"H x 2-3/4"D overall.
LIGHT STOP 4-1/4" ROUND LED   Bussmann NO.43 Automotive Fuse Kit Eiko 2057A-2BP Automotive Bulb
Industry-standard PL3 socket integrated into housing. 9-16 volt operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 degree position. Suitable for over-80" vehicle width applications. 7-diodes, LED oval. Kit contains light, grommet and plug. Proudly made in the USA. Contains 42 blade type fuses: seven each of ATM-5, 10, 15, 20, 25 and 30. Fuses are loose-packed in reclosable clamshell package. Also included: FT-3 combination fuse tester and puller. S-8 bulb, C-6/C-6 filament.
Eiko 1157A-2BP Miniature Auto Peterson V507 Implement Flush Mount Tractor Light Eiko 1156A-BP Incandescent Lamp
S-8 bulb, C-6/C-6 filament. Par-36 sealed beam cushioned by durable, molded, weatherproof housing from road shock and vibration, snaps in for fast, easy service. Universal 5/16" stud and adjustable, zinc-plated bracket allow mounting in any position. 10" lead wire exits through housing back. Uses No.4411 beam for trapezoid pattern. Clear or painted amber glass S-8 bulb with C-6/C-6 filament for auto back-up light or turn signal; auto/truck back-up, turn signal or high-mount stop.
Multi-Tow 47675 7-Outlet Management Power Adapter FUSE ATM FMX KIT WITH TESTER  Bussmann NO.64 Automotive Fuse Kit
Weatherproof socket and terminal covers. Great for tailgating, camping or emergency use. 7 RV Blade to 5 wire flat and 4 wire flat with 12 volt power socket. Adapts to tow multiple trailers with 5 and 4 wire flat connectors. Contains 5 each of ATM-10, 15, 20, 25 and 30A, 1 each of FMX-20, 30, 40, and 50A, and FT-3 fuse tester/puller. ATC and Max fuses are for vehicles built in the late 1990s, are loose-packed for easy access in reclosable heavy-duty clamshell package. Also includes FT-3 combination fuse tester and puller.
WIRE PRIMARY BLACK 100FT 18GA WIRE PRIMARY YELO 100FT 18GA  WIRE PRIMARY GREEN 100FT 18GA
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant.
WIRE PRIMARY RED 100FT 18GA   WIRE PRIMARY WHITE 100FT 18GA WIRE PRIMARY GREEN 100FT 14GA
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant.
WIRE PRIMARY RED 100FT 14GA   Hopkins 49915 Bonded Trailer Electrical Wire Peterson V773 Alternating Strobe Action Flashing Light
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For all basic wiring needs. Copper 4 wire bonded. Printed functions on wire. 25 feet. Provides alternating strobe-like action with 90 flashes per minute. Includes three powerful magnets on base for secure mounting and 12-foot coiled cord with cigarette lighter plug. 5 1/2" x 4 3/4".
WIRE PRIMARY BLACK 100FT 16GA WIRE PRIMARY YELO 100FT 16GA  WIRE PRIMARY GREEN 100FT 16GA
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant.
WIRE PRIMARY RED 100FT 16GA   WIRE PRIMARY WHITE 100FT 16GA Piranha V423 LED Surface Mount Combination Tail Light
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. Kit with decorative snap-on chrome bezel included. Hard-wired design eliminates the need for separate plug and reduces connection points. Designed for horizontal installation. 9-16 volt operating range. Meets FMVSS 108 requirements. 7-1/2" length x 3-1/4" height.
Peterson V840 LED Submersible Combination Tail Light Eiko 3357-BP Incandescent Lamp Calterm 5207 Automotive Emergency Electrical Repair Kit
Solid state construction, no bulbs to break or burn out. 100,000 hour rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion, and vibration. Lower amp draw than incandescent lights. Designed to directly replace 440-series incandescent lights. Integral, dedicated side marker diode. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. 4-1/2" width x 4-1/2" height x 2" depth. Clear or painted glass S-8 bulb with C-6 filaments for auto stop, tail signal, back-up, and parking lights. Carrying case stores neatly in vehicle for emergency wiring. Multi-tool crimps 22-10 AWG insulated terminals and 7 to 8mm ignition terminals, strips and cuts 22-10 AWG solid or stranded wire. Includes multi-tool, 12-Volt DC test light, mini screwdriver, battery terminal brush with with internal and external wire brushes, test leads, fuse puller, glass and blade fuses, primary wire, electrical tape, heat shrink tubing, butt splices (22-10 AWG), ring terminals (22-10 AWG), spade terminals (16-14 AWG), quick splices (16-14 AWG), fully insulated disconnect sets (16-14 AWG), female disconnects (16-14 AWG), wire caps, grommets, and cable clamps.
Peterson V856 LED Submersible Combination Tail Light Eiko 3156-BP Incandescent Lamp Eiko 3057-BP Automotive Turn Signal
Solid state construction, no bulbs to break or burn out. 100,000 hour rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion, and vibration. Lower amp draw than incandescent lights. Designed to directly replace 456-series incandescent lights. Integral, dedicated side marker diode. Exceeds all DOT rear lighting and reflex requirements for trailers 80" wide and over. 7-15/16" width x 2-7/8" height x 2-7/8" depth. Clear or painted glass S-8 bulb with C-6 filaments for auto stop, tail signal, back-up, and parking lights. Clear or painted glass S-8 bulb with C-6 filaments for auto stop, tail signal, back-up, and parking lights.
Eiko 3157-BP Automotive Turn Signal Peterson V540 Trailer Light Kit Peterson V840L LED Submersible Combination Tail Light
Clear or painted glass S-8 bulb with C-6 filaments for auto stop, tail signal, back-up, and parking lights. Provides all legal lighting and reflective equipment for any trailer less than 80"W. Combination lights, of tough molded housing and lenses with phosphor bronze contacts for durability, exceed DOT requirements for stop, turn, tail, rear and side reflector, side marker and license illuminator. Side marker light has built-in reflector optics. Includes No.440 stop and tail combination lights, 2 No.114A side marker lights, 20' wire harness, 48" trunk connector, license bracket, all mounting hardware, and installation instructions. Solid state construction, no bulbs to break or burn out. 100,000 hour rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion, and vibration. Lower amp draw than incandescent lights. Designed to directly replace 440-series incandescent lights. Integral, dedicated side marker diode. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. 4-1/2" width x 4-1/2" height x 2" depth.
Eiko 3057A-BP Incandescent Lamp Hopkins 49905 Bonded Trailer Electrical Wire Eiko 3157A-BP Incandescent Lamp
Clear or painted glass S-8 bulb with C-6 filaments for auto stop, tail signal, back-up, and parking lights. For all basic wiring needs. Copper 4 wire bonded. Printed functions on wire. 25 feet. Clear or painted glass S-8 bulb with C-6 filaments for auto stop, tail signal, back-up, and parking lights.
Peterson V544 Submersible Rear Trailer Light Kit Peterson V555 Auxiliary Tow Light Kit Mintcraft CP-399PC3L Automotive Electrical Repair Kit
Tough molded housing and lenses with phosphor bronze contacts for durability. Belljar design, gasketed lenses prevent water from reaching bulbs and contacts. Use as a rear light for over 80" wide applications. Exceeds DOT requirements for stop, turn, tail, rear and side reflector, side marker and rear clearance. Includes No.452 Belljar submersible lights, 25' trailer harness, 48" trunk connector, plastic license bracket, all mounting hardware, and installation instructions. Front side marker lights and reflectors needed to meet DOT requirements. Two auxiliary warning lights with magnetic bases. Kit includes trunk harness, 20' four-wire harness, connectors, and instructions. Plugs into standard flat four-way vehicle trailer light connector. Includes a foldable, high impact, double decker carrying case that allows both sides to be open at the same time. Use on motorcycles, cars, trucks, boats, jet skis, snowmobiles, etc. Contents: Crimping tool, 5 way, (AWG 22 - 10),  Insulated Screwdrivers: 1- Phillips #1 x 4", 1 - Slotted 5/32"x4",  Long Nose Pliers 6",  Voltage Tester (AC/DC, 3.5 - 400 Volt) Cable Ties: 250 pc - 3/32" x 4", 6 pc - 3/32" x 8", Assorted Velcro Ties 4 pc  15/32" x 5-3/4", Wire, 18 Gauge x 60", Electrical Tape (7mil x 3/4" x 30'), 1 pc Test Leads, 1 pc Fuse Puller, Blade Fuses: 2 pc of each 10A, 15A, 20A, 25A, 30A, Glass Fuses: 1 pc of each 5A, 9A, 10A, 15A, 20A, Assorted Wire Clamps: 10 pc - 1/8", 3 pc - 1/4", 3 pc - 3/8",  Butt Connectors: 13 pc AWG 22-16, 14 pc AWG 16 -14,  Ring Terminals : 5 pc AWG 22-16, 5 pc AWG 16-14, 4 pc AWG 12-10, Spade Terminals: 5 pc AWG22-16, 5 pc AWG16-14, 4 pc AWG12-10, Male Disconnects: 5 pc AWG22-16, 5 pc AWG16-14, Female Disconnects 5 pc AWG 22-16, 5 pc  AWG 16-14,  Quick Splices 3 pc AWG 16-14, Twist-on Wire Joints: 10 pc AWG22-16, 5 pc AWG22-14, 5 pc AWG 22-12.
WIRE PRIMARY BLACK 100FT 14GA WIRE PRIMARY BLUE 100FT 14GA  WIRE PRIMARY YELO 100FT 14GA
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant.
WIRE PRIMARY WHITE 100FT 14GA Channel Cat V547 Submersible Rear Trailer Light Kit Peterson V947 LED Submersible Rear Trailer Light Kit
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. Provides rear lighting and reflectors for trailers. Lights feature easy maintenance and bulb replacement while maintaining gasket seal, and grounding through a separate lead wire. Includes 2 low-profile, submersible combination taillights (1 with license light) that mount on slide-on 2'' centers, 25' trailer harness, 48" trunk connector, license bracket, mounting hardware, and installation instructions. Front sidemarker/clearance lights, side reflectors, and rear identification lights are necessary to meet all DOT requirements. Submersible rear lighting kit and reflectors for all trailers 80" wide and over. Includes 856/856L LED tail lights plus license bracket, mounting hardware and installation instructions. 7-15/16" width x 2-7/8" height x 2-7/8" depth.
WIRE PRIMARY BLACK 100FT 12GA WIRE PRIMARY BLUE 100FT 12GA  WIRE PRIMARY YELO 100FT 12GA
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant.
WIRE PRIMARY RED 100FT 12GA   WIRE PRIMARY WHITE 100FT 12GA Peterson V941 LED Submersible Rear Trailer Light Kit
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. Submersible LED rear lighting kit for trailers under 80" wide. Solid state super bright LED diodes, 100,000 hour rated life. Includes 840/840L LED tail lights plus license bracket, mounting hardware and installation instructions.
WIRE PRIMARY GREEN 100FT 10GA WIRE PRIMARY RED 100FT 10GA   WIRE PRIMARY BLACK 100FT 10GA
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant.
WIRE PRIMARY BLUE 100FT 10GA  WIRE PRIMARY YELO 100FT 10GA
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant. For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. SAE Standards and RoHS Compliant.
   
 
1