|
|
|
|
|
|
|
|
|
|
|
Multi dose counter display. Fits on peg board or can be used as a counter top display. Display only - no product.
|
Wire gauge 3-tier waterfall rack. Rack only - no product.
|
Display racking materials. Pog racking/signage.
|
|
|
|
|
|
|
|
|
|
|
|
|
Display racking materials. Pog racking/signage.
|
Display racking materials. Pog racking/signage.
|
Display only - no product.
|
|
|
|
|
|
|
|
|
|
|
|
|
FARM-AG POG 4 foot display.
|
FARM-AG POG 4 foot display.
|
Holds up to 32 ball mounts. 1-1/4" channel for signing and pricing. Rack only - no product.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dividers can be placed anywhere within the Visi-Bin, without the removal of product. Provides a clean, clear look of separation between products with minimal wasted space.
|
Adapts Mintcraft faucet display pods for use on pegboard.
|
Designed to hold standard reciprocating saw. Special hanger holds up cord for better presentation. 2.25" H x 5.25" W C-channel for sign insert. Attractive black powdercoat finish. Dimensions: 5.2" W x 11.4" H x 4" D.
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to hold a sign to a metal surface. Medium duty magnet, hold signs horizontally. Holds up to .100" thick material. 3" wide x 1.1" high x 1" deep.
|
Display piece, 7-3/4" width x 6-3/8" height x 4" depth.
|
Designed to hold standard cordless drill. 2.25" H x 5.25" W C-channel for sign insert. Attractive black powdercoat finish. Dimensions: 5.25" W x 8.04" H x 3.45" D.
|
|
|
|
|
|
|
|
|
|
|
|
|
Display piece, 11-3/8" width x 6-3/8" height x 4" depth.
|
Designed to hold standard angle grinder. Special hanger holds up cord for better presentation. 2.25" H x 5.25" W C-channel for sign insert. Attractive black powdercoat finish. Dimensions: 5.25" W x 10.6" H x 2.3" D.
|
Designed to hold standard drill. Special hanger holds up cord for better presentation. 2.25" H x 5.25" W C-channel for sign insert. Attractive black powdercoat finish. Dimensions: 5.7" W x 10.3" H x 4.8" D.
|
|
|
|
|
|
|
|
|
|
|
|
|
Molded inventory control clips fits .149" to .250" wire diameter. Helps keep merchandise faced, giving fully stocked appearance. Use to keep prepacked products on displays.
|
Clear design visi-bin to display products. Designed to fit on Fastrack. Made of SAN for greater strength.
|
Plastic slatwall display. Clear design, durable SAN for greater strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for long handle shovels, lawn rakes, leaf rakes and bow rakes.
|
Display piece, 15-1/8" width x 6-3/8" height x 4" depth.
|
Design allows for Visi-Bins to be hung back-to-back on the grid panel. 4.75" wide x 2.56" high x .5" deep. Clear finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear design visi-bin to display products. Designed to fit on Fastrack. Made of SAN for greater strength.
|
Pegboard hanger for shears and loppers.
|
Slatwall dump bin adaptor, durable polycarbonate design made for small, bulk items. 4 prong for added strength in pegboard. 6 inches x 5.5 inches x 11.5 inches.
|
|
|
|
|
|
|
|
|
|
|
|
|
Black and silver border for highlighting sale items. For use with laser/inkjet printers. Sheets are 8-1/2" x 11".
|
Black and silver border for highlighting sale items. For use with laser/inkjet printers. Sheets are 8-1/2" x 11".
|
Orange starburst signs for highlighting sale items.
|
|
|
|
|
|
|
|
|
|
|
|
|
Highly visible 2 sided arrows can be seen from any direction. Bright neon colors on sturdy 12 point coated card stock. Easy to click in and out of shelf clips. Works with shelf sign clip R16-4W-100BG, sku 447.6016 from Southern Imperial. 5-1/2" wide x 2-1/2" tall.
|
Designed to hold standard circular saw. Special hanger holds up cord for better presentation. 2.25" H x 5.25" W C-channel for sign insert. Attractive black powdercoat finish. Dimensions: 9.875" W x 2.3" H x 9.875" D.
|
Highly visible 2 sided arrows can be seen from any direction. Bright neon colors on sturdy 12 point coated card stock. Easy to click in and out of shelf clips. Works with shelf sign clip R16-4W-100BG, sku 447.6016 from Southern Imperial. 5-1/2" wide x 2-1/2" tall.
|
|
|
|
|
|
|
|
|
|
|
|
|
Highly visible 2 sided arrows can be seen from any direction. Bright neon colors on sturdy 12 point coated card stock. Easy to click in and out of shelf clips. Works with shelf sign clip R16-4W-100BG, sku 447.6016 from Southern Imperial. 5-1/2" wide x 2-1/2" tall.
|
Designed to hold standard finish sanders. Special hanger holds up cord for better presentation. 2.25" H x 5.25" W C-channel for sign insert. Attractive black powdercoat finish. Dimensions: 5.25" W x 5.7" H x 9.35" D.
|
Dividers can be placed anywhere within the Visi-Bin, without the removal of product. Provides a clean, clear look of separation between products with minimal wasted space.
|
|
|
|
|
|
|
|
|
|
|
|
|
MintCraft Pro Tool Display Rack
|
Display rack can be clipped into pegboard or stand upright on counter. Jars not included. Dimension: 36.61 x 16.54 x 16.54 inches.
|
Designed for tagging bulky merchandise, ideal for tagging work wear, denim, towels, fur, wool or multiple layers of thick fabric.
|
|
|
|
|
|
|
|
|
|
|
|
|
Display piece, 12-3/8" width x 11-1/4" height x 4-1/2" depth.
|
Display piece, 12-3/8" width x 11-1/4" height x 4-1/2" depth.
|
Display piece, 12-3/8" width x 11-1/4" height x 4-1/2" depth.
|
|
|
|
|
|
|
|
|
|
|
|
|
Decals are designed to withstand harsh conditions. Printed on 2" x 3" outdoor grade vinyl with clear laminate.
|
Plastic slatwall display. Clear design, durable SAN for greater strength.
|
Designed and manufactured with high-quality PVC with UV inhibitors to prevent discoloration. Heat-welded edges and grommet. Single hole on all sizes except 3 holes for 8.5" x 11" size. All sizes listed are based on the size of the intended insert. All pockets are slightly larger than listed size for ease of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
Holds signs off of warehouse uprights with square holes in flag position. Includes hinged Fast Grip.
|
Designed and manufactured with high-quality PVC with UV inhibitors to prevent discoloration. Heat-welded edges and grommet. Single hole on all sizes except 3 holes for 8.5" x 11" size. All sizes listed are based on the size of the intended insert. All pockets are slightly larger than listed size for ease of use.
|
Holds signs off of warehouse uprights with square holes in flag position. Includes hinged Fast Grip.
|
|
|
|
|
|
|
|
|
|
|
|
|
M-D Building Products Threshold Riser, 12 in Length
|
Plastic display, holds 28 mops or brooms.
|
Wire gauge vertical saw blade rack. Rack only - no product.
|
|
|
|
|
|
|
|
|
|
|
|
|
Wire gauge 60 piece hole saw merchandiser sizes 5/8" - 6". Display only - no product.
|
Orange starburst signs for highlighting sale items.
|
Holds signs three ways on 1-1/4" price channels. 1-1/4" height x 1" width.
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic 4' x 6' blue wall. Display only - no product.
|
Wire gauge vertical saw blade rack. Rack only - no product.
|
Wire gauge 3-tier waterfall rack. Rack only - no product.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dimensions: 32.25" height x 18.25" width x 0.75" depth. Display only - no product.
|
Dimensions: 12.25" height x 10.00" width x 13.25" depth. Display only - no product.
|
Blue wall. Display only - no product.
|
|
|
|
|
|
|
|
|
|
|
|
|
Black and silver border for highlighting sale items. For use with laser/inkjet printers. Sheets are 8-1/2" x 11".
|
Wire gauge vertical saw blade rack. Rack only - no product.
|
Acrylic sign holder. Works specifically on Southern Imperial item R16-APSH-K2BX - Orgill SKU 965.8477.
|
|
|
|
|
|
|
|
|
|
|
|
|
Laminated 30 piece header card pack. Display only - no product.
|
Designed and manufactured with high-quality PVC with UV inhibitors to prevent discoloration. Heat-welded edges and grommet. Single hole on all sizes except 3 holes for 8.5" x 11" size. All sizes listed are based on the size of the intended insert. All pockets are slightly larger than listed size for ease of use.
|
Wire gauge numbered 60-slot drill bit display rack. Rack only - no product.
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed and manufactured with high-quality PVC with UV inhibitors to prevent discoloration. Heat-welded edges and grommet. Single hole on all sizes except 3 holes for 8.5" x 11" size. All sizes listed are based on the size of the intended insert. All pockets are slightly larger than listed size for ease of use.
|
Orange starburst signs for highlighting sale items.
|
Hang tabs butterfly style sheets. Peg most packages without a hole or hanger to save shelf space. Ultra clear plastic with superior adhesive to repair damaged packages.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gondola top sign holder. Multi-grip soft fingers hold tighter. Designed to fit securely onto 2.5" Lozier and Madix gondola tops. Holds up to 5/16" signs and sign frames. Size: 6" long x 2.65" wide x 1.75" high.
|
|
Empty dump bin with display board. Paper with color print. Use to display hand tools and other impulse items. 60 centimeters long x 50 centimeters wide x 85 centimeters high.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hang any short hoses with fittings. Slide on small bottles (paints, cosmetics, sauces, glues, etc.) to create additional space. Works in 1/4" perforated paneling and slat wall. 0.149" diameter.
|
Plastic slatwall display. Clear design, durable SAN for greater strength.
|
Heat sealed durable UV resistant flexible PVC. Dual strips of 1/2" permanent adhesive. Adheres to a variety of surfaces. Pocket 1/8" oversized for easy insertion of signs.
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat sealed durable UV resistant flexible PVC. Adhesive backed entire surface for holding strength. Pocket 1/8" oversized for easy insertion of signs.
|
Empty display to hold clip strip items. Injection molded polypropylene. Has 12 clips to hold 12 items per display, 2 inch label holder. 1.875" clip gap, 24" L x 1" W.
|
With a 3" knotted string. Tag is printed on one side only. 1-1/4" x 1-7/8".
|
|
|
|
|
|
|
|
|
|
|
|
|
Black and silver border for highlighting sale items. For use with laser/inkjet printers. Sheets are 8-1/2" x 11".
|
Single peg hook, ball tip end. Works in 1/4" perforated paneling and slatwall. .177 diameter bracket. 0.212" diameter wire.
|
Rack extensions add capacity to any existing "Master" rack. Premium features include all-steel construction, rubber feet and a special tongue and groove system that allows for quick removal of ring sections. Expands an additional 6" to any rack of 18" capacity or less. Countertop extensions are only for use with 30 degree angled racks. Use with SKU# 785-7238. Three catalog rack rings per extension.
|
|
|
|
|
|
|
|
|
|
|
|
|
Rack for displaying long handled shovels. Rack only, no product.
|
Pegboard mounted, wire mini blind divider. Perfect for separating long items that need to be displayed vertically, such as mini blinds, moulding and PVC/copper piping. 17" L x 9" W x 4" H.
|
Designed and manufactured with high-quality PVC with UV inhibitors to prevent discoloration. Heat-welded edges and grommet. Single hole on all sizes except 3 holes for 8.5" x 11" size. All sizes listed are based on the size of the intended insert. All pockets are slightly larger than listed size for ease of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
Single peg hook, ball tip end. Works in 1/4" perforated paneling and slatwall. .177 diameter bracket. 0.212" diameter wire.
|
Pre-cut 9" long, 27 gauge flexible wire, encased in plastic, sized to fit 1/8" punch holes. Moisture resistant, can be used outdoors.
|
Single peg hook, ball tip end. Works in 1/4" perforated paneling and slatwall. .177 diameter bracket. 0.212" diameter wire.
|
|
|
|
|
|
|
|
|
|
|
|
|
Single peg hook, ball tip end. Works in 1/4" perforated paneling and slatwall. .177 diameter bracket. 0.212" diameter wire.
|
Made of thermoplastic material. Holds a variety of products and connects easily to 1/4" pegboard displays. Bin only - no product.
|
Made of thermoplastic material and connects easily to 1/4" pegboard displays.
|
|
|
|
|
|
|
|
|
|
|
|
|
Extruded top mount Price channel sign holder, hangs below shelf for easy product removal. Holds signs 3.5 inches x 5.5 inches. Made from clear PVC.
|
Works on 1/4" and 1/8" perforated paneling and slatwall. .149" diameter. Use Quad-Wire, Fast Tag, R35, or metal plate label holders. Label holder sold separately.
|
Ready to rent/service required combo tag with 5" plastic security loop.
|
|
|
|
|
|
|
|
|
|
|
|
|
Draws attention to "green" products. Fits on peg label holder with adhesive.
|
Works on 1/4" and 1/8" perforated paneling and slatwall. .149" diameter. Use Quad-Wire, Fast Tag, R35, or metal plate label holders. Label holder sold separately.
|
Draws attention to "green" products. Fits in shelf channel.
|
|
|
|
|
|
|
|
|
|
|
|
|
Perfect for tools, brooms, etc. 4 prong back provides extra strength. Works in 1/4" perforated paneling and slatwall. Hook specifications: hook size: 10". Heavy duty hook strength. Wire diameter: .224".
|
Two-piece design for easy installation. Sturdy metal back plate for trouble-free use. Provides solid support without marring display. Works in 1/4" perforated paneling and slatwall. Reduced gap between wires for better spacing. Notation for compatible wire diameter. Easy load front end allows faster merchandising. Label holder sold separately. 0.212" diameter.
|
Displays up to three wheelbarrows. Saves floor space. 32" x 98" x 30".
|
|
|
|
|
|
|
|
|
|
|
|
|
Empty display, no product. White. 12" wide x 12" deep.
|
Wire scan hook. Welded metal back easily fits into standard Lozier and Madix uprights. Design utilizes normally unused rack space for merchandise display without sacrificing retail space. Attaches to empty gondola upright slots. .212" diameter.
|
Conceals the base of wooden pallets, protects sharp edges on pallet corners. Stretching fabric allows it to fit full pallets and half pallets. 6.5" high.
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to accommodate products that require a larger clearance when displayed on a scanning hook. Larger gap between stem and arm for greater clearance. .212 wire diameter with plastic back.
|
Works on pallets or as a floor stand. 9 inches on center between sign loops. Extra hole on bottom allows multiple arm directions. Adjusts with a push of the button on the pole and locks in place. Adjustable to 52" collapsed and 80" when extended. Includes acrylic heat folded pocket.
|
Two-piece design for easy installation. Sturdy metal back plate for trouble-free use. Provides solid support without marring display. Works in 1/4" perforated paneling and slatwall. Reduced gap between wires for better spacing. Notation for compatible wire diameter. Easy load front end allows faster merchandising. Label holder sold separately. 0.212" diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to accommodate products that require a larger clearance when displayed on a scanning hook. Larger gap between stem and arm for greater clearance. .212 wire diameter with plastic back.
|
Holds most of Southern Imperial's label holders. A versatile, long lasting strip retailer. Hangs anywhere. Galvanized finish. Label holder sold separately. 32" long x .206" diameter - 12 clips.
|
Designed to accommodate products that require a larger clearance when displayed on a scanning hook. Larger gap between stem and arm for greater clearance. .212 wire diameter with plastic back.
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to accommodate products that require a larger clearance when displayed on a scanning hook. Larger gap between stem and arm for greater clearance. .212 wire diameter with plastic back.
|
Security lights.
|
Slatwall clear dump bin design made for small, bulk items. Durable SAN with greater strength. Wedge opening for easy access of products. Use with Peg board with optional adaptor RPDMP-SBACK.
|
|
|
|
|
|
|
|
|
|
|
|
|
Two-piece design for easy installation. Sturdy metal back plate for trouble-free use. Provides solid support without marring display. Works in 1/4" perforated paneling and slatwall. Reduced gap between wires for better spacing. Notation for compatible wire diameter. Easy load front end allows faster merchandising. Label holder sold separately. 0.212" diameter.
|
Two-piece design for easy installation. Sturdy metal back plate for trouble-free use. Provides solid support without marring display. Works in 1/4" perforated paneling and slatwall. Reduced gap between wires for better spacing. Notation for compatible wire diameter. Easy load front end allows faster merchandising. Label holder sold separately. 0.212" diameter.
|
Use Quad-Wire, Fast Tag, R35 or metal plate label holders. Works on 1/4" perforated paneling and slatwall. 186 diameter bracket. Bright galvanized. 0.212" diameter. Label holder sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Three inch high dividers. Vertical wires are on 1/2" centers. Horizontal wires are on 5/8" centers. 3" high dividers, can be used with 3" fronts only. Bin dividers are 2" shorter than shelf it is designed to fit. Fits Lozier style shelving.
|
Use Quad-Wire, Fast Tag, R35 or metal plate label holders. Works on 1/4" perforated paneling and slatwall. 186 diameter bracket. Bright galvanized. 0.212" diameter. Label holder sold separately.
|
Slatwall clear dump bin design made for small, bulk items. Durable SAN with greater strength. Wedge opening for easy access of products. Use with Peg board with optional adaptor RPDMP-SBACK.
|
|
|
|
|
|
|
|
|
|
|
|
|
Organizes and displays catalogs, magazines, and looseleaf materials. Hinged for fast and easy setup. Tongue and groove slots provide easy insertion and removal of sections. Can be expanded with extension units. Folds flat for shipping or storage. Non-skid feet. Heavy gauge steel construction. Gray powder coat finish.
|
Use for hanging on wire baskets or fencing. Each kit contains 10 sign holders and 60 snap lock rings. Durable PVC will not break or yellow under light.
|
Three inch high dividers. Vertical wires are on 1/2" centers. Horizontal wires are on 5/8" centers. 3" high dividers, can be used with 3" fronts only. Bin dividers are 2" shorter than shelf it is designed to fit. Fits Lozier style shelving.
|
|
|
|
|
|
|
|
|
|
|
|
|
Ship flat. Require no tools and few components. Good for soft, bulk and impulse items. Adjustable shelf height every 6". Collapsible design allows for easy set-up, break-down, packing and storing. 32" high x 24" wide.
|
Wire scan hook. Welded metal back easily fits into standard Lozier and Madix uprights. Design utilizes normally unused rack space for merchandise display without sacrificing retail space. Attaches to empty gondola upright slots. .212" diameter.
|
Two-piece design for easy installation. Sturdy metal back plate for trouble-free use. Provides solid support without marring display. Works in 1/4" perforated paneling and slatwall. Reduced gap between wires for better spacing. Notation for compatible wire diameter. Easy load front end allows faster merchandising. Label holder sold separately. 0.212" diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
Two-piece design for easy installation. Sturdy metal back plate for trouble-free use. Provides solid support without marring display. Works in 1/4" perforated paneling and slatwall. Reduced gap between wires for better spacing. Notation for compatible wire diameter. Easy load front end allows faster merchandising. Label holder sold separately. 0.212" diameter.
|
Use Quad-Wire, Fast Tag, R35 or metal plate label holders. Works on 1/4" perforated paneling and slatwall. 186 diameter bracket. Bright galvanized. 0.212" diameter. Label holder sold separately.
|
Works on 1/4" and 1/8" perforated paneling and slatwall. .149" diameter. Use Quad-Wire, Fast Tag, R35, or metal plate label holders. Label holder sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Slatwall clear dump bin design made for small, bulk items. Durable SAN with greater strength. Wedge opening for easy access of products. Use with Peg board with optional adaptor RPDMP-SBACK.
|
Two-piece design for easy installation. Sturdy metal back plate for trouble-free use. Provides solid support without marring display. Works in 1/4" perforated paneling and slatwall. Reduced gap between wires for better spacing. Notation for compatible wire diameter. Easy load front end allows faster merchandising. Label holder sold separately. 0.212" diameter.
|
Three inch high dividers. Vertical wires are on 1/2" centers. Horizontal wires are on 5/8" centers. 3" high dividers, can be used with 3" fronts only. Bin dividers are 2" shorter than shelf it is designed to fit. Fits Lozier style shelving.
|
|
|
|
|
|
|
|
|
|
|
|
|
Three inch high dividers. Heavy gauge wire frame with vertical wire on 5/8" centers. Actual part length is approximately 1-3/4" less than the shelf depth.
|
Keys conversion kit, includes a 3 foot key center header pop, key tag kit, bulk key labels, keys cut here window sign and key catalog.
|
Three inch high dividers. Heavy gauge wire frame with vertical wire on 5/8" centers. Actual part length is approximately 1-3/4" less than the shelf depth.
|
|
|
|
|
|
|
|
|
|
|
|
|
Ship flat. Require no tools and few components. Good for soft, bulk and impulse items. Adjustable shelf height every 6". Collapsible design allows for easy set-up, break-down, packing and storing. 32" high x 24" wide.
|
Two-piece design for easy installation. Sturdy metal back plate for trouble-free use. Provides solid support without marring display. Works in 1/4" perforated paneling and slatwall. Reduced gap between wires for better spacing. Notation for compatible wire diameter. Easy load front end allows faster merchandising. Label holder sold separately. 0.212" diameter.
|
Three inch high dividers. Vertical wires are on 1/2" centers. Horizontal wires are on 5/8" centers. 3" high dividers, can be used with 3" fronts only. Bin dividers are 2" shorter than shelf it is designed to fit. Fits Lozier style shelving.
|
|
|
|
|
|
|
|
|
|
|
|
|
Three inch high dividers. Vertical wires are on 1/2" centers. Horizontal wires are on 5/8" centers. 3" high dividers, can be used with 3" fronts only. Bin dividers are 2" shorter than shelf it is designed to fit. Fits Lozier style shelving.
|
Three inch high dividers. Heavy gauge wire frame with vertical wire on 5/8" centers. Actual part length is approximately 1-3/4" less than the shelf depth.
|
Three inch high dividers. Heavy gauge wire frame with vertical wire on 5/8" centers. Actual part length is approximately 1-3/4" less than the shelf depth.
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes steel tube, wire, and board. Assembly size: 20.1" width x 19.3" diameter x 27.6" height. Holds 1/8" to 2" diameter pipe.
|
Ship flat. Require no tools and few components. Good for soft, bulk and impulse items. Adjustable shelf height every 6". Collapsible design allows for easy set-up, break-down, packing and storing. 32" high x 24" wide.
|
Weather proof, special topcoating engineered for laser toners. Use any laser printer, no special toner required. White, 6 mil thick. Not compatible with inkjet printers.
|
|
|
|
|
|
|
|
|
|
|
|
|
Weather proof, special topcoating engineered for laser toners. Use any laser printer, no special toner required. White, 6 mil thick. Not compatible with inkjet printers.
|
Three inch high dividers. Vertical wires are on 1/2" centers. Horizontal wires are on 5/8" centers. 3" high dividers, can be used with 3" fronts only. Bin dividers are 2" shorter than shelf it is designed to fit. Fits Lozier style shelving.
|
Three inch high dividers. Heavy gauge wire frame with vertical wire on 5/8" centers. Actual part length is approximately 1-3/4" less than the shelf depth.
|
|
|
|
|
|
|
|
|
|
|
|
|
Three inch high dividers. Heavy gauge wire frame with vertical wire on 5/8" centers. Actual part length is approximately 1-3/4" less than the shelf depth.
|
Holds 6 ladders. Includes accessory tray. 3.83' x 2.16' footprint.
|
Holds 7 ladders.
|
|
|
|
|
|
|
|
|
|
|
|
|
Three inch dividers. Fronts and dividers lock together, create rigid system. Vertical wires on 1/2" centers. Horizontal wires on 5/8" centers. Fits Lozier and Madix shelving. Not interchangeable with "FS" series wire.
|
Three inch divider. Attaches to shelf top and can be used independently. Heavy gauge wire frame with vertical wire on 5/8" centers. Not interchangeable with "WBF" series wire.
|
Three inch dividers. Fronts and dividers lock together, create rigid system. Vertical wires on 1/2" centers. Horizontal wires on 5/8" centers. Fits Lozier and Madix shelving. Not interchangeable with "FS" series wire.
|
|
|
|
|
|
|
|
|
|
|
|
|
Stong, sturdy baskets have more plastic in them with thicker walls and smaller holes in the bottom. Will not break as easily as others, reducing replacement costs. Comfortable fiberglass/nylon handles. Made from 100 percent recycled plastic.
|
Fits most round, square or diamond shaped perforated shelf holes. Head prevents pull through. Fits .234" size hole.
|
Stong, sturdy baskets have more plastic in them with thicker walls and smaller holes in the bottom. Will not break as easily as others, reducing replacement costs. Comfortable fiberglass/nylon handles. Made from 100 percent recycled plastic.
|
|
|
|
|
|
|
|
|
|
|
|
|
NLS conversion kit; includes 8 foot numbers, letters and signs planogram, a variety of grids to hold numbers and letters series, index cards, sign labels for the large signs pop/id strip, 5 sign-pocket wall rack, 2" scanner hooks and scanner plates and backer card set.
|
Metal, 6-tier. Includes 4 small shelves, 4 locking casters, 31" x 20" at the top, and 2 large shelves 40" x 26" at the bottom. 40"D x 25"W x 73.625"H overall size. 220 lb. loading capacity. Epoxy black finish.
|
Striking tool rack comes with sign. Empty display, products not included.
|
|
|
|
|
|
|
|
|
|
|
Professional rack for Nyco Total Care Carpet Rental products. Easy to set up, comes complete with high impact graphic header, shelf strips, literature rack and hooks for machine accessories. Holds 10-12 cases of mixed products and 3 carpet cleaning machines. Empty rack-no product or machines are included.
|
With display rails. Display only - no product.
|
|